Carbide Radius End Mills(Page4)

An online store for carbide radius end mills. In MISUMI's e-catalog, by setting conditions for specifications/standards such as blade diameter, radius size, compatible work materials, blade length, machining applications such as flat surface / side surface /groove, and coating presence, you can easily find the desired tool. A varied lineup including multi-blades for high hardness steel machining, products for aluminum machining with DLC coating, blade length difference, etc. is available.
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 9 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 17 Day(s) or Less
Brand
Product Series
Days to Ship
Blade diameter (D)(φ)
R Size(mm)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Overall Length (L)(mm)
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Torsion Angle (θ)
R Precision(μm)

    X Coated Radius End Mill for Trapezoidal Runner NERR-2X

      MSRS430 MUGEN-COATING 4-Flute Radius End Mill

        Power Radius End Mill MSXH440R

          MHDH645R 6-Flute Radius-End Mill for High-Hardness

            Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE

              HGGVRX HG Coated Carbide High Helix Radius

                SAGVR2T SA Coated Carbide Radius 2-Flute

                  SAGVR2LS SA Coated Carbide Radius 4-Flute Long Shank

                    SAGVR2LS SA Coated Carbide Radius 2-Flute Long Shank

                      GS MILL Hard Radius GSH 6000SF-R Type

                        ZX Coat UP MILL Radius SSUP4000ZX-R

                          ZX Coated UP Mill for Deep Engraving, Radius, SSUPR4000ZX-R Type

                            GSX MILL 4 Blade Radius End Mill, Vibration Damping Type, GSXVL4000-R-2.5D Type

                              GS MILL Hard Radius GSH8000SF-R Type

                                SCD2 End Mill with Corner R, 2-Flute, Non-Coated

                                  SCD2A End Mill with Corner R, 2-Flute, OK Coated

                                    SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

                                      SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

                                        DZ (TiAlN)-COAT Radius End Mill, DZ-SED-R Type

                                          Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type

                                            Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

                                              Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

                                                Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (With Rounded Corners)

                                                  Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)

                                                    Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

                                                      One Cut Super Radius End Mill DV-OCSR

                                                        One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

                                                          Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

                                                            Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                                              Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

                                                                Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362

                                                                  High Chip Flow Performance, Compatible for Steel/Difficult-to-Cut Material Unequal Flute Spacing End Mill 4YERM (Radius)

                                                                    CoroMill Plura, Carbide Solid End Mill Radius

                                                                      CBN 2-Flute Corner Radius End Mill SBRE-2

                                                                        CBN 2-Flute Corner Radius End Mill SBREF-2

                                                                          CBN 3-Flute Corner Radius End Mill SBRE-3

                                                                            CBN 3-Flute Corner Radius End Mill SBREF-3

                                                                              End Mill with 2 Carbide Flutes and Corner Radius KSER-2

                                                                                End Mill with 2 Carbide Flutes and Corner Radius KSR-2

                                                                                  End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

                                                                                    Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                                                                      Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

                                                                                        End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

                                                                                          Steam Carbide Radius End Mill CT-STE4R (Z10)

                                                                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) (Slim Shank)

                                                                                            Brand

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            OSG

                                                                                            SANKO MFG

                                                                                            SANKO MFG

                                                                                            SANKO MFG

                                                                                            SANKO MFG

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            OKAZAKI SEIKO

                                                                                            OKAZAKI SEIKO

                                                                                            OKAZAKI SEIKO

                                                                                            OKAZAKI SEIKO

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            KYOCERA

                                                                                            SANDVIK

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            KYOWA SEIKO

                                                                                            TAIYO-TOOL

                                                                                            DIJET

                                                                                            Product Series

                                                                                            X Coated Radius End Mill for Trapezoidal Runner NERR-2X

                                                                                            MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                                                                                            Power Radius End Mill MSXH440R

                                                                                            MHDH645R 6-Flute Radius-End Mill for High-Hardness

                                                                                            Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE

                                                                                            HGGVRX HG Coated Carbide High Helix Radius

                                                                                            SAGVR2T SA Coated Carbide Radius 2-Flute

                                                                                            SAGVR2LS SA Coated Carbide Radius 4-Flute Long Shank

                                                                                            SAGVR2LS SA Coated Carbide Radius 2-Flute Long Shank

                                                                                            GS MILL Hard Radius GSH 6000SF-R Type

                                                                                            ZX Coat UP MILL Radius SSUP4000ZX-R

                                                                                            ZX Coated UP Mill for Deep Engraving, Radius, SSUPR4000ZX-R Type

                                                                                            GSX MILL 4 Blade Radius End Mill, Vibration Damping Type, GSXVL4000-R-2.5D Type

                                                                                            GS MILL Hard Radius GSH8000SF-R Type

                                                                                            SCD2 End Mill with Corner R, 2-Flute, Non-Coated

                                                                                            SCD2A End Mill with Corner R, 2-Flute, OK Coated

                                                                                            SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

                                                                                            SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

                                                                                            DZ (TiAlN)-COAT Radius End Mill, DZ-SED-R Type

                                                                                            Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type

                                                                                            Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES3-R Type

                                                                                            Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) (with Corner Radius) AL-SEES2-LS-R Type

                                                                                            Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (With Rounded Corners)

                                                                                            Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)

                                                                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

                                                                                            One Cut Super Radius End Mill DV-OCSR

                                                                                            One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

                                                                                            Square End Mill Regular, 3-Flute, for Aluminum, Chamfered, with Oil Hole 3367

                                                                                            Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                                                                            Square End Mill Long Multi-Flute (6-Flute) Corner Radius for High Hardness Steel 3363

                                                                                            Square End Mill Long Neck 4-Flute Corner Radius for High Hardness Steel GF300T 3362

                                                                                            High Chip Flow Performance, Compatible for Steel/Difficult-to-Cut Material Unequal Flute Spacing End Mill 4YERM (Radius)

                                                                                            CoroMill Plura, Carbide Solid End Mill Radius

                                                                                            CBN 2-Flute Corner Radius End Mill SBRE-2

                                                                                            CBN 2-Flute Corner Radius End Mill SBREF-2

                                                                                            CBN 3-Flute Corner Radius End Mill SBRE-3

                                                                                            CBN 3-Flute Corner Radius End Mill SBREF-3

                                                                                            End Mill with 2 Carbide Flutes and Corner Radius KSER-2

                                                                                            End Mill with 2 Carbide Flutes and Corner Radius KSR-2

                                                                                            End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

                                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

                                                                                            End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

                                                                                            Steam Carbide Radius End Mill CT-STE4R (Z10)

                                                                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners) (Slim Shank)

                                                                                            Days to Ship 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 5 Day(s) or more 5 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more
                                                                                            Blade diameter (D)(φ)2 ~ 66 ~ 123 ~ 125 ~ 120.8 ~ 34 ~ 253 ~ 206 ~ 256 ~ 256 ~ 123 ~ 203 ~ 203 ~ 20164 ~ 124 ~ 124 ~ 124 ~ 123 ~ 206 ~ 206 ~ 206 ~ 226 ~ 166 ~ 123 ~ 202 ~ 203 ~ 206 ~ 203 ~ 166 ~ 166 ~ 164 ~ 2560.3 ~ 60.3 ~ 33 ~ 60.3 ~ 21 ~ 41 ~ 60.5 ~ 33 ~ 163 ~ 161 ~ 36 ~ 2510 ~ 22
                                                                                            R Size(mm)0.3 ~ 50.1 ~ 30.3 ~ 30.2 ~ 20.1 ~ 0.50.5 ~ 30.5 ~ 50.3 ~ 80.3 ~ 80.2 ~ 20.2 ~ 30.2 ~ 20.2 ~ 31 ~ 20.2 ~ 20.2 ~ 20.5 ~ 20.5 ~ 210.4 ~ 50.5 ~ 40.5 ~ 50.5 ~ 20.5 ~ 30.2 ~ 30.5 ~ 30.5 ~ 31 ~ 2.50.5 ~ 20.5 ~ 11 ~ 20.2 ~ 0.3-----------1 ~ 40.3 ~ 3
                                                                                            work materialgeneral steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[◎] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]Aluminum[◎] / Copper[○]Aluminum[◎] / Copper[○]Aluminum[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]Aluminum[◎] / Copper[◎]Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Titanium[◎]Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎]general steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]Aluminum[◎] / Copper[◎]Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]-general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]
                                                                                            Blade length (ℓ)(mm)5 ~ 1212 ~ 248 ~ 2610 ~ 240.32 ~ 1.29 ~ 5610 ~ 4520 ~ 7520 ~ 7550 ~ 758 ~ 384.5 ~ 308 ~ 503212 ~ 3612 ~ 368 ~ 248 ~ 2410 ~ 4517 ~ 459 ~ 339 ~ 339 ~ 2421 ~ 388 ~ 384 ~ 408 ~ 38----12 ~ 45-0.3 ~ 20.3 ~ 21.5 ~ 20.5 ~ 1.51 ~ 403 ~ 131.5 ~ 106 ~ 324.5 ~ 243 ~ 1015 ~ 5022 ~ 40
                                                                                            Number of flutes(sheet)244644242644482244223244434346444223322233444
                                                                                            TypeTapered neck radiusradiusradiusradiusLong-Neck RadiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusLong-Neck RadiusradiusradiusradiusradiusHigh-Feed RadiusHigh-Feed Radiusradiusradiusradius--radiusradiusradius
                                                                                            Overall Length (L)(mm)45 ~ 7580 ~ 11060 ~ 8060 ~ 805050 ~ 14050 ~ 115120 ~ 230120 ~ 23050 ~ 7550 ~ 12560 ~ 20050 ~ 1259070 ~ 11070 ~ 11070 ~ 11070 ~ 11045 ~ 11555 ~ 11560 ~ 12080 ~ 200120 ~ 18060 ~ 10060 ~ 12570 ~ 18560 ~ 12557 ~ 10457 ~ 9275 ~ 15075 ~ 15055 ~ 1215750 ~ 6050 ~ 6050 ~ 705050 ~ 8040 ~ 506060 ~ 10060 ~ 1206070 ~ 13080 ~ 130
                                                                                            Shank diameter (d)(mm)4 ~ 126 ~ 126 ~ 126 ~ 1244 ~ 256 ~ 206 ~ 256 ~ 256 ~ 126 ~ 206 ~ 206 ~ 20166 ~ 126 ~ 126 ~ 126 ~ 126 ~ 206 ~ 206 ~ 205.8 ~ 205.8 ~ 156 ~ 126 ~ 206 ~ 206 ~ 206 ~ 206 ~ 166 ~ 166 ~ 166 ~ 25664644 ~ 64 ~ 636 ~ 166 ~ 1636 ~ 258 ~ 20
                                                                                            Underneck length (ℓ1)(mm)----2 ~ 16.65-----------15 ~ 4215 ~ 42-------6 ~ 1510 ~ 1521 ~ 4421 ~ 4439 ~ 10539 ~ 105-39------------
                                                                                            Machining ApplicationPlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsSide / GrooveSide / GrooveSideSide / GrooveSide / GroovePlane / GroovePlane / GroovePlane / Side / GroovePlane / Side / GrooveSide / GrooveSide / GrooveSide / GrooveSideSideSideSide / GrooveSide / Curved surfaceSide / Curved surface----Plane / Side / Curved surface / GroovePlane / Side / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined Cuts-Side / Groove
                                                                                            CoatingTiCNTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For General Steels (AlCrN, etc.)TiAlNTiAlNTiAlNFor High Hardness (Silicon Group)TiAlNTiAlNFor General Steels (AlCrN, etc.)For High Hardness (Silicon Group)Non-CoatedTiAlNTiAlNFor High Hardness (Silicon Group)TiAlNNon-CoatedNon-CoatedNon-CoatedTiAlNTiAlNTiAlN--Non-CoatedOtherOtherOtherTiAlN-Non-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiAlNDLCDLCTiAlNNon-CoatedTiAlN
                                                                                            Torsion Angle (θ)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)
                                                                                            R Precision(μm)0.02~-0.020.01~-0.01-0.01~-0.010~-0.010~+0.040~+0.040~+0.040~+0.04--0.01~+0.02-0.01~+0.02-------0.025~-0.0250.025~-0.0250.025~-0.025---0.015~-0.0150.02~-0.02----------------0~-0.05-

                                                                                            Loading...

                                                                                            Related Categories to Carbide Radius End Mills