• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 20:30 24/4/2019 to 3:00 (SGT) 25/4/2019. We apologize for the inconvenience.
  • Please be informed that there may be potential delay of response/shipment from supplier due to Japan Golden Week holiday which falls on 27th April to 6th May 2019. We seek your kind understand, should there be any delay. Click here for details

Radius End Mills (Carbide)

Days to Ship
  • All
  • Same day
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 9 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 32 Day(s) or Less
Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Overall Length (L)(mm)
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Torsion Angle (θ)
R Precision(μm)

    CoroMill Plura HD, Carbide Solid Radius End Mill (Without square center-cut, Hardness: 30 HRC or less)

      TSC series carbide radius end mill, 2-flute / regular model

        Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS

          TSC series carbide radius end mill, 2-flute / short model

            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

              TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

                Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X

                  XAL series carbide radius end mill, 2-flute / short model

                    TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

                      2-flute, Corner R Short Type FX-CR-MG-EDS

                        New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS

                          3-flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS

                            Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT

                              4-flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS

                                Cermet end mill (for bottom finishing) FX-MCF

                                  GS MILL Hard Radius GSH 6000SF-R Type

                                    Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                      Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                        Mapal CPMill-Uni-Torus "CPM160"

                                          Performance EndMill Endmill Dedicated to Titanium Machining (4-Blade)

                                            Mapal OptiMill-Titan-Trochoid 5-Flute, for Titanium

                                              All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872

                                                WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

                                                  5-Flute Variable Lead-Geometry End Mill With SAFE-LOCK® Groove For Milling Titanium Alloys UVX-TI-5FL-SL

                                                    TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                      TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                                                        TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                          TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                                                            TSC series carbide radius end mill, 4-flute / stub model

                                                              XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                                                                XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

                                                                  XAL series carbide radius end mill, 4-flute / short model

                                                                    TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                                                                      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                                                                        TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                                                                          TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                                                                              TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                                                                                TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                                                                                  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                                                                                    TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

                                                                                      TSC series carbide radius end mill, 3-flute, 45° spiral / short model

                                                                                        TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

                                                                                          TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

                                                                                            Brand

                                                                                            SANDVIK

                                                                                            MISUMI

                                                                                            OSG

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            7 LEADERS

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            GUHRING

                                                                                            KYOWA SEIKO

                                                                                            MAPAL

                                                                                            MAPAL

                                                                                            MAPAL

                                                                                            GUHRING

                                                                                            WATERMILLS

                                                                                            OSG

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            Product Series

                                                                                            CoroMill Plura HD, Carbide Solid Radius End Mill (Without square center-cut, Hardness: 30 HRC or less)

                                                                                            TSC series carbide radius end mill, 2-flute / regular model

                                                                                            Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS

                                                                                            TSC series carbide radius end mill, 2-flute / short model

                                                                                            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                                                                                            TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

                                                                                            Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X

                                                                                            XAL series carbide radius end mill, 2-flute / short model

                                                                                            TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

                                                                                            2-flute, Corner R Short Type FX-CR-MG-EDS

                                                                                            New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS

                                                                                            3-flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS

                                                                                            Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT

                                                                                            4-flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS

                                                                                            Cermet end mill (for bottom finishing) FX-MCF

                                                                                            GS MILL Hard Radius GSH 6000SF-R Type

                                                                                            Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                                                                            Mapal CPMill-Uni-Torus "CPM160"

                                                                                            Performance EndMill Endmill Dedicated to Titanium Machining (4-Blade)

                                                                                            Mapal OptiMill-Titan-Trochoid 5-Flute, for Titanium

                                                                                            All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872

                                                                                            WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

                                                                                            5-Flute Variable Lead-Geometry End Mill With SAFE-LOCK® Groove For Milling Titanium Alloys UVX-TI-5FL-SL

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                                                                                            TSC series carbide radius end mill, 4-flute / stub model

                                                                                            XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                                                                                            XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

                                                                                            XAL series carbide radius end mill, 4-flute / short model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

                                                                                            Days to Ship 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 4 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more Same day or more Same day or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more
                                                                                            Specifications
                                                                                              • TS
                                                                                              • General Steel
                                                                                              • 2 Flutes
                                                                                              • R (Regular)
                                                                                                • TS
                                                                                                • General Steel
                                                                                                • 2 Flutes
                                                                                                • S (Short)
                                                                                                • Non-Coated
                                                                                                • General Steel
                                                                                                    • XAL
                                                                                                    • General Steel
                                                                                                    • 2 Flutes
                                                                                                    • TS
                                                                                                    • General Steel
                                                                                                    • 2 Flutes
                                                                                                    • B (Stub)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  • XAL
                                                                                                                                  • General Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • XAL
                                                                                                                                  • General Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • XAL
                                                                                                                                  • General Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • High-Hardness Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 3 Flutes
                                                                                                                                  • R (Regular)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • S (Short)
                                                                                                                                  • TS
                                                                                                                                  • General Steel
                                                                                                                                  • 4 Flutes
                                                                                                                                  • B (Stub)
                                                                                                                                  Blade diameter (D)(φ)-1 ~ 206 ~ 251 ~ 201 ~ 202 ~ 251 ~ 201 ~ 121 ~ 201 ~ 1212 ~ 253 ~ 201 ~ 203 ~ 256 ~ 206 ~ 123 ~ 163 ~ 168 ~ 256 ~ 205 ~ 256 ~ 253 ~ 2012 ~ 254 ~ 124 ~ 204 ~ 124 ~ 122 ~ 63 ~ 124 ~ 123 ~ 202 ~ 122 ~ 123 ~ 122 ~ 122 ~ 204 ~ 163 ~ 123 ~ 123 ~ 123 ~ 123 ~ 203 ~ 223 ~ 12
                                                                                                                                  R Size(mm)0.5 ~ 20.1 ~ 30.2 ~ 30.1 ~ 30.1 ~ 30.2 ~ 6.50.1 ~ 40.1 ~ 30.1 ~ 30.1 ~ 31 ~ 30.2 ~ 30.3 ~ 30.2 ~ 50.1 ~ 0.40.2 ~ 20.5 ~ 2--F0.12 ~ 2.5R0.1 ~ 0.40.5 ~ 30.3 ~ 41 ~ 50.813 ~ 2.4380.813 ~ 2.6070.813 ~ 2.4380.813 ~ 2.4380.2 ~ 0.50.2 ~ 20.2 ~ 20.1 ~ 30.5 ~ 20.5 ~ 20.75 ~ 30.5 ~ 20.5 ~ 31 ~ 30.3 ~ 10.3 ~ 10.5 ~ 10.3 ~ 20.2 ~ 20.2 ~ 20.5 ~ 1
                                                                                                                                  work materialgeneral steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Aluminum[◎]Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]Aluminum[◎] / Copper[◎]---general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○]Aluminum[○] / Copper[○]Stainless Steel[○] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
                                                                                                                                  Blade length (ℓ)(mm)-3 ~ 6013 ~ 452 ~ 404 ~ 604 ~ 503 ~ 383 ~ 301.5 ~ 302.5 ~ 2614 ~ 278 ~ 382 ~ 406 ~ 500.9 ~ 3.250 ~ 75-6 ~ 326 ~ 1913 ~ 4117 ~ 7513 ~ 4512 ~ 5024 ~ 508 ~ 248 ~ 408 ~ 248 ~ 243 ~ 916 ~ 3818 ~ 388 ~ 382 ~ 124 ~ 241.2 ~ 52 ~ 124 ~ 406 ~ 244.5 ~ 184.5 ~ 184.5 ~ 185 ~ 265 ~ 564.5 ~ 304.5 ~ 18
                                                                                                                                  Number of flutes(sheet)52422 ~ 44222223344643445435343443443344443433344
                                                                                                                                  Typeradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradius-radiusradiusradiusradiusradiusradiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusradiusradiusradiusradiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusLong-Neck Radiusradiusradiusradiusradiusradiusradiusradius
                                                                                                                                  Overall Length (L)(mm)57 ~ 10445 ~ 12590 ~ 18040 ~ 11040 ~ 12550 ~ 12050 ~ 10050 ~ 7540 ~ 10040 ~ 11090 ~ 11050 ~ 10560 ~ 15050 ~ 12090 ~ 16050 ~ 7557 ~ 9260 ~ 10011 ~ 3257 ~ 10462 ~ 15057 ~ 12139 ~ 10490 ~ 14050 ~ 10050 ~ 15080 ~ 16080 ~ 1605060 ~ 10060 ~ 10050 ~ 10050 ~ 10050 ~ 10060 ~ 11050 ~ 10050 ~ 13070 ~ 18040 ~ 6540 ~ 6560 ~ 10060 ~ 10060 ~ 13080 ~ 20060 ~ 100
                                                                                                                                  Shank diameter (d)(mm)6 ~ 204 ~ 206 ~ 254 ~ 204 ~ 206 ~ 254 ~ 204 ~ 124 ~ 204 ~ 1212 ~ 256 ~ 206 ~ 206 ~ 256 ~ 206 ~ 126 ~ 166 ~ 166 ~ 206 ~ 206 ~ 256 ~ 253 ~ 2012 ~ 256 ~ 126 ~ 206 ~ 126 ~ 1266 ~ 126 ~ 124 ~ 204 ~ 124 ~ 126 ~ 124 ~ 124 ~ 204 ~ 166 ~ 126 ~ 126 ~ 126 ~ 126 ~ 206 ~ 206 ~ 12
                                                                                                                                  Underneck length (ℓ1)(mm)-23 ~ 55-17 ~ 45----14 ~ 45-40 ~ 56-4 ~ 15-9 ~ 30-21 ~ 44----21 ~ 65-36 ~ 75--35 ~ 10835 ~ 108------7.5 ~ 24-----14 ~ 6818 ~ 7026 ~ 9210 ~ 1814 ~ 68
                                                                                                                                  Machining Application-Plane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / GroovePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surfaceSide / Groove-Plane / Side / Curved surface / Groove / Inclined Cuts----Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts-Plane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined Cuts
                                                                                                                                  Coating-For High Hardness (Silicon Group)TiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group) / Non-CoatedFor High Hardness (Silicon Group)-For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)TiAlNDLCNon-CoatedTiAlNTiAlNTiAlNFor High Hardness (Silicon Group)OtherDLC-Non-Coated-OtherNon-CoatedTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)
                                                                                                                                  Torsion Angle (θ)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)OtherStandard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Weak torsion (15 to 25˚)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)No torsionPowerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)OtherOtherStandard torsion (30-40°)Powerful Torsion (45°-60°)OtherPowerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)No torsionPowerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)
                                                                                                                                  R Precision(μm)-±0.01 ~ ±0.02-±0.01 ~ ±0.02±0.02±0.020~-20±0.02±0.01 ~ ±0.02-------------------±0.005±0.02±0.02±0.02±0.015±0.015±0.02±0.015±0.015±0.015±0.01±0.01±0.01±0.01±0.01±0.01±0.01

                                                                                                                                  Loading...

                                                                                                                                  Related Categories to Radius End Mills (Carbide)