Carbide Radius End Mills

An online store for carbide radius end mills. In MISUMI's e-catalog, by setting conditions for specifications/standards such as blade diameter, radius size, compatible work materials, blade length, machining applications such as flat surface / side surface /groove, and coating presence, you can easily find the desired tool. A varied lineup including multi-blades for high hardness steel machining, products for aluminum machining with DLC coating, blade length difference, etc. is available.
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 3 Day(s) or Less
  • 4 Day(s) or Less
  • 5 Day(s) or Less
  • 6 Day(s) or Less
  • 7 Day(s) or Less
  • 9 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 32 Day(s) or Less
Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Overall Length (L)(mm)
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Torsion Angle (θ)
R Precision(μm)

    Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE

      CoroMill Plura HD, Carbide Solid Radius End Mill (Without square center-cut, Hardness: 30 HRC or less)

        TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

          Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS

            3-flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE

              Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

                4-flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS

                  6-flute, Unequal Lead, Corner R, Short NEO-CR-EMS

                    TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                      TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                        TSC series carbide radius end mill, 2-flute / short model

                          TSC series carbide long neck radius end mill, 2-flute, long neck model

                            GS MILL radius GS4-R

                              Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR

                                GS MILL Hard Radius GSH 6000SF-R Type

                                  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                    Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X

                                      TSC series carbide radius end mill, 3-flute, 45° spiral / short model

                                        TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                                          TSC series carbide radius end mill, 4-flute / short model

                                            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                                              X's Mill Geo Radius 4XSGEO-R

                                                Heavy Duty Multi-Function FXS-PKE

                                                  Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR

                                                    MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                                                      MHRH430R MUGEN-COATING PREMIUM 4-Flute Long Neck Radius End Mill for Hardened Steels

                                                        GS MILL Hard Radius GSH8000SF-R Type

                                                          DZ (TiAlN)-COAT Radius End Mill, DZ-SED-R Type

                                                            Union Tool Carbide End Mill

                                                              All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872

                                                                TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                                  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                                                                    TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                                      TSC series carbide radius end mill, 4-flute / stub model

                                                                        XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                                                                          XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

                                                                            XAL series carbide radius end mill, 2-flute / short model

                                                                              XAL series carbide radius end mill, 4-flute / short model

                                                                                TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                                                                                  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                                                                                    TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                                                                                      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                                                                                        TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                                                                                          TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                                                                                            Brand

                                                                                            OSG

                                                                                            SANDVIK

                                                                                            MISUMI

                                                                                            OSG

                                                                                            OSG

                                                                                            KYOWA SEIKO

                                                                                            OSG

                                                                                            OSG

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            OSG

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            KYOWA SEIKO

                                                                                            7 LEADERS

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            OSG

                                                                                            OSG

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            DIJET

                                                                                            UNION TOOL

                                                                                            GUHRING

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            Product Series

                                                                                            Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE

                                                                                            CoroMill Plura HD, Carbide Solid Radius End Mill (Without square center-cut, Hardness: 30 HRC or less)

                                                                                            TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

                                                                                            Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS

                                                                                            3-flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE

                                                                                            Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

                                                                                            4-flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS

                                                                                            6-flute, Unequal Lead, Corner R, Short NEO-CR-EMS

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                                                                                            TSC series carbide radius end mill, 2-flute / short model

                                                                                            TSC series carbide long neck radius end mill, 2-flute, long neck model

                                                                                            GS MILL radius GS4-R

                                                                                            Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR

                                                                                            GS MILL Hard Radius GSH 6000SF-R Type

                                                                                            Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

                                                                                            Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                                                                                            TSC series carbide radius end mill, 4-flute / short model

                                                                                            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                                                                                            X's Mill Geo Radius 4XSGEO-R

                                                                                            Heavy Duty Multi-Function FXS-PKE

                                                                                            Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR

                                                                                            MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                                                                                            MHRH430R MUGEN-COATING PREMIUM 4-Flute Long Neck Radius End Mill for Hardened Steels

                                                                                            GS MILL Hard Radius GSH8000SF-R Type

                                                                                            DZ (TiAlN)-COAT Radius End Mill, DZ-SED-R Type

                                                                                            Union Tool Carbide End Mill

                                                                                            All Purpose Unequal Lead End Mill Regular Corner Radius 4-Flute RF100U 3872

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, 4-flute / stub model

                                                                                            XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                                                                                            XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

                                                                                            XAL series carbide radius end mill, 2-flute / short model

                                                                                            XAL series carbide radius end mill, 4-flute / short model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                                                                                            Days to Ship 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 5 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more Same day or more Same day or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more
                                                                                            Specifications
                                                                                                            • TS
                                                                                                            • High-Hardness Steel
                                                                                                            • 4 Flutes
                                                                                                            • S (Short)
                                                                                                            • TS
                                                                                                            • High-Hardness Steel
                                                                                                            • 4 Flutes
                                                                                                            • S (Short)
                                                                                                            • TS
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                            • S (Short)
                                                                                                            • TS
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                                      • TS
                                                                                                                      • General Steel
                                                                                                                      • 3 Flutes
                                                                                                                      • S (Short)
                                                                                                                      • TS
                                                                                                                      • General Steel
                                                                                                                      • 4 Flutes
                                                                                                                      • S (Short)
                                                                                                                      • TS
                                                                                                                      • General Steel
                                                                                                                      • 4 Flutes
                                                                                                                      • S (Short)
                                                                                                                      • Non-Coated
                                                                                                                      • General Steel
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 3 Flutes
                                                                                                                                        • S (Short)
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • S (Short)
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 3 Flutes
                                                                                                                                        • S (Short)
                                                                                                                                        • TS
                                                                                                                                        • General Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • B (Stub)
                                                                                                                                        • XAL
                                                                                                                                        • General Steel
                                                                                                                                        • 3 Flutes
                                                                                                                                        • XAL
                                                                                                                                        • General Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • XAL
                                                                                                                                        • General Steel
                                                                                                                                        • 2 Flutes
                                                                                                                                        • XAL
                                                                                                                                        • General Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 3 Flutes
                                                                                                                                        • B (Stub)
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 3 Flutes
                                                                                                                                        • S (Short)
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • B (Stub)
                                                                                                                                        • TS
                                                                                                                                        • High-Hardness Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • S (Short)
                                                                                                                                        • TS
                                                                                                                                        • General Steel
                                                                                                                                        • 3 Flutes
                                                                                                                                        • B (Stub)
                                                                                                                                        • TS
                                                                                                                                        • General Steel
                                                                                                                                        • 4 Flutes
                                                                                                                                        • B (Stub)
                                                                                                                                        Blade diameter (D)(φ)6 ~ 20-2 ~ 256 ~ 253 ~ 208 ~ 163 ~ 256 ~ 254 ~ 124 ~ 161 ~ 200.2 ~ 63 ~ 120.2 ~ 46 ~ 123 ~ 161 ~ 203 ~ 123 ~ 221 ~ 121 ~ 203 ~ 203 ~ 202 ~ 126 ~ 121 ~ 6163 ~ 20-6 ~ 254 ~ 124 ~ 204 ~ 122 ~ 63 ~ 124 ~ 121 ~ 123 ~ 202 ~ 122 ~ 123 ~ 122 ~ 122 ~ 203 ~ 123 ~ 12
                                                                                                                                        R Size(mm)0.5 ~ 30.5 ~ 20.2 ~ 6.50.2 ~ 30.5 ~ 3-0.2 ~ 50.3 ~ 50.813 ~ 2.4381 ~ 30.1 ~ 30.05 ~ 10.2 ~ 20.05 ~ 10.2 ~ 2-0.1 ~ 40.3 ~ 20.2 ~ 20.1 ~ 30.1 ~ 30.2 ~ 30.2 ~ 30.5 ~ 20.1 ~ 30.05 ~ 11 ~ 21-0.5 ~ 30.813 ~ 2.4380.813 ~ 2.6070.813 ~ 2.4380.2 ~ 0.50.2 ~ 20.2 ~ 20.1 ~ 30.1 ~ 30.5 ~ 20.5 ~ 20.75 ~ 30.5 ~ 20.5 ~ 30.3 ~ 10.3 ~ 1
                                                                                                                                        work materialgeneral steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]-general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
                                                                                                                                        Blade length (ℓ)(mm)9 ~ 30-4 ~ 5013 ~ 454.5 ~ 3012 ~ 246 ~ 5012 ~ 508 ~ 246 ~ 242 ~ 400.16 ~ 127.5 ~ 260.15 ~ 450 ~ 756 ~ 323 ~ 385 ~ 264.5 ~ 302 ~ 244 ~ 608 ~ 385 ~ 303 ~ 1812 ~ 240.8 ~ 53210 ~ 450.15 ~ 113 ~ 458 ~ 248 ~ 408 ~ 243 ~ 916 ~ 3818 ~ 383 ~ 308 ~ 382 ~ 124 ~ 241.2 ~ 52 ~ 124 ~ 404.5 ~ 184.5 ~ 18
                                                                                                                                        Number of flutes(sheet)45443346442242 ~ 46343442 ~ 4443448224343434243344434
                                                                                                                                        Typeradiusradiusradiusradiusradius-radiusradiusHigh-Feed RadiusLong-Neck RadiusradiusLong-Neck RadiusradiusLong-Neck Radiusradius-radiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusradiusLong-Neck RadiusradiusradiusLong-Neck RadiusradiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusradiusradiusradiusradiusradiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed Radiusradiusradius
                                                                                                                                        Overall Length (L)(mm)50 ~ 11057 ~ 10450 ~ 12090 ~ 18050 ~ 125100 ~ 16050 ~ 12050 ~ 12080 ~ 16070 ~ 18040 ~ 11040 ~ 10045 ~ 7550 ~ 11050 ~ 7560 ~ 10050 ~ 10060 ~ 10080 ~ 20040 ~ 7540 ~ 12550 ~ 12560 ~ 16060 ~ 22080 ~ 11050 ~ 1109045 ~ 1155057 ~ 12150 ~ 10050 ~ 15080 ~ 1605060 ~ 10060 ~ 10050 ~ 7550 ~ 10050 ~ 10050 ~ 10060 ~ 11050 ~ 10050 ~ 13040 ~ 6540 ~ 65
                                                                                                                                        Shank diameter (d)(mm)6 ~ 206 ~ 206 ~ 256 ~ 256 ~ 206 ~ 146 ~ 256 ~ 256 ~ 124 ~ 164 ~ 204 ~ 66 ~ 124 ~ 66 ~ 126 ~ 164 ~ 206 ~ 126 ~ 204 ~ 124 ~ 206 ~ 206 ~ 206 ~ 206 ~ 124 ~ 6166 ~ 2046 ~ 256 ~ 126 ~ 206 ~ 1266 ~ 126 ~ 124 ~ 124 ~ 204 ~ 124 ~ 126 ~ 124 ~ 124 ~ 206 ~ 126 ~ 12
                                                                                                                                        Underneck length (ℓ1)(mm)--------35 ~ 108-17 ~ 451 ~ 40-0.5 ~ 60---18 ~ 7010 ~ 1817 ~ 45--9 ~ 6010 ~ 160.8-3 ~ 48---21 ~ 65--35 ~ 108-------7.5 ~ 24----
                                                                                                                                        Machining ApplicationPlane / Side / Curved surface-Plane / Side / Curved surface / GroovePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Side / GroovePlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / GrooveSide / GrooveSide / Groove--Plane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined Cuts
                                                                                                                                        CoatingTiAlN-For High Hardness (Silicon Group)TiAlNNon-CoatedDLCTiAlNTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)TiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)DLC-For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group) / Non-CoatedTiAlNTiAlNFor High Hardness (Silicon Group)TiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)TiAlN-OtherFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)
                                                                                                                                        Torsion Angle (θ)Powerful Torsion (45°-60°)Standard torsion (30-40°)OtherPowerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)No torsionStandard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)No torsionPowerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)
                                                                                                                                        R Precision(μm)--±0.02------±0.015±0.01 ~ ±0.02±0.005 ~ ±0.010~-0.030 ~ 0~-0.015---0~-20±0.01±0.01±0.01 ~ ±0.02±0.02-0.032~-0.059 ~ -0.014~-0.028--0.01~-0.010.005~-0.005 ~ 0.01~-0.01-------±0.005±0.02±0.02±0.02±0.02±0.015±0.015±0.02±0.015±0.015±0.01±0.01

                                                                                                                                        Loading...

                                                                                                                                        Related Categories to Carbide Radius End Mills