(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 21/4/2024 to 6:00 (SGT) 22/4/2024. We apologize for the inconvenience.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Carbide Radius End Mills（Machining Application：Curved surface）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
(Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
MISUMI
Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining
- Volume Discount
Standard Price: SGD 28.71- Days to Ship: 4 Day(s) or more -
HLRS2000 HM Coated 2-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: SGD 45.94- Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
MISUMI
4-Flute Radius for High-Efficiency and High-Speed Machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill 4-Flute / Stub Type
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills WX Super Coated High-precision
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Standard Price: SGD 65.20- Days to Ship: 3 Day(s) or more -
HRRS, HM Coated 4-Flute Short Shank Radius
UNION TOOL
[Features]
· Unique corner rounding creates larger cutting depth and pick feed than with a ball
· The seamless corner radius shape reduces cutting resistance and chattering
· High hardness materials up to 65 HRC can also be machinedStandard Price: SGD 67.90- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Ideal for corner rounding and high-speed contour machining of molds and machine parts.
Standard Price: SGD 75.97- Days to Ship: 4 Day(s) or more -
HLRS4000 HM Coated 4-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Rigidity-oriented blade shape provides long life even when machining high hardness materials
· Capable of stable machining for both dry and wet type
· New HARDMAX coating adopted to improve oxidation resistance.Standard Price: SGD 53.97- Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Standard Price: SGD 24.47- Days to Ship: 4 Day(s) or more -
(Economy series) XAL series carbide radius end mill, 4-flute / short model
MISUMI
The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
- Volume Discount
- XAL
- General Steel
- 4 Flutes
Standard Price: SGD 31.78- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type
MISUMI
The popular radius type for stainless steel processing is also effective in preventing chipping
- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Standard Price: SGD 113.68- Days to Ship: 4 Day(s) or more -
WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating
WATERMILLS
[Features]
·Strong twist.
·Quieter and smoother cutting.
·Can be used for both roughing and finishing.
·The unique groove shape enables smooth chip shape and discharge.
·Center cut.
·It has a cylindrical second angle to prevent chattering.Standard Price: SGD 60.47- Days to Ship: 6 Day(s) or more -
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- General Steel
Days to Ship: 6 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius
OSG
The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.
Standard Price: SGD 200.97- Days to Ship: 3 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Standard Price: SGD 223.15- Days to Ship: 3 Day(s) or more -
Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Standard Price: SGD 118.30- Days to Ship: 4 Day(s) or more -
Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X
7 LEADERS
[Features]
· Also use the 4-flute short radius end mill to prevent tip chipping.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
· It supports high-speed side cutting.Standard Price: SGD 35.96- Days to Ship: 4 Day(s) or more -
Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X
7 LEADERS
[Features]
· Also use the 4-flute medium shank radius end mill to prevent tip chipping.
· Enables radius cutting deep into the work materials.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
· It supports high-speed side cutting.Standard Price: SGD 35.96- Days to Ship: 6 Day(s) or more -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]
·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: SGD 88.92- Days to Ship: 4 Day(s) or more -
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
Radius type that's also effective in preventing cutter marks
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
VAC Series Carbide 2-Flute Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
Standard Price: SGD 44.86- Days to Ship: 4 Day(s) or more -
NACHI(FUJIKOSHI)
Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.
Standard Price: SGD 121.30- Days to Ship: 4 Day(s) or more -
Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys
OSG
End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.
Standard Price: SGD 260.55- Days to Ship: 3 Day(s) -
3 Flutes Short for Copper & Aluminum Alloys
OSG
Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.
Standard Price: SGD 98.44- Days to Ship: 3 Day(s) or more -
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Standard Price: SGD 87.56- Days to Ship: 3 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)
OSG
Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.
Standard Price: SGD 458.33- Days to Ship: 3 Day(s) or more -
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](//sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Available with an extensive lineup of corner radiiStandard Price: SGD 59.84- Days to Ship: 4 Day(s) or more -
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: SGD 50.34- Days to Ship: 4 Day(s) or more -
CNRS 4-flute radius for machining titanium and super heat-resistant alloys
UNION TOOL
[Features]
· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy
· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials
· Variable split, high torsion and positive rake angle design enables stable machining
· A blade design that reduces the cutting resistance in helical and inclined use, etc.Standard Price: SGD 111.96- Days to Ship: 4 Day(s) or more -
SSR200 CBN Super Speed Radius End Mill
NS TOOL
Achieves high-efficiency machining of corner radius due to outstanding CBN durability
Standard Price: SGD 192.82- Days to Ship: 8 Day(s) or more -
Power Radius End Mill MSXH440R
NS TOOL
Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining
Standard Price: SGD 69.44- Days to Ship: 4 Day(s) or more -
MHDH645R 6-Flute Radius-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)
Standard Price: SGD 141.72- Days to Ship: 4 Day(s) or more -
Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC
KYOWA SEIKO
[Specifications]
· Shape: Radius End Mill (carbide)
· Material: Super Micro Grain Alloy
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined CuttingStandard Price: SGD 98.57- Days to Ship: 4 Day(s) or more -
End Mill with 4 Carbide Flutes and Corner Radius KSRA-4
KYOWA SEIKO
[Features]
A carbide end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes, with corner R.
It is resistant to breakage and chipping.
The high cutting speed and high production efficiency lead to overall production cost reduction.
[Applications]
Suitable for slab milling, side milling, curved surface milling, grooving, and ramping.Standard Price: SGD 130.64- Days to Ship: 4 Day(s) or more -
Carbide 2-Flute Corner Radius Medium End Mill 30° B257X
7 LEADERS
[Features]
· Also use the 2-flute medium shank radius end mill to prevent tip chipping.
· Enables radius cutting deep into the work materials.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.Standard Price: SGD 35.96- Days to Ship: 6 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: SGD 91.13- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: SGD 85.60- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Standard Price: SGD 66.54- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: SGD 58.97- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: SGD 87.76- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: SGD 94.36- Days to Ship: 4 Day(s) or more
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | UNION TOOL | MISUMI | MISUMI | OSG | UNION TOOL | NACHI(FUJIKOSHI) | UNION TOOL | MISUMI | MISUMI | MISUMI | MISUMI | WATERMILLS | MISUMI | OSG | OSG | OSG | 7 LEADERS | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | KYOWA SEIKO | KYOWA SEIKO | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | (Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model | (Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model | Micro Grain Carbide End Mills WX Super Coated High-precision | (Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | (Economy series) XAL series carbide radius end mill, 2-flute / short model | (Economy series) XAL series carbide radius end mill, 4-flute / short model | TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type | WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long with Corner Radius | Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard) | Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X | Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide End Mills DLC Coated 2 Flutes Short for Aluminum Alloys | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard) | C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product] | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | CNRS 4-flute radius for machining titanium and super heat-resistant alloys | Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | |||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 2 ～ 20 | 0.4 ～ 6 | 4 ～ 12 | 1 ～ 12 | 0.2 ～ 4 | 2 ～ 12 | 3 ～ 12 | 0.8 ～ 6 | 0 ～ 16 | 1 ～ 12 | 3 ～ 20 | 3 ～ 12 | 3 ～ 20 | 2 ～ 20 | 6 ～ 25 | 6 ～ 20 | 3 ～ 25 | 1 ～ 20 | 3 ～ 20 | 1 ～ 20 | 0.2 ～ 3 | 3 ～ 12 | 2 ～ 12 | 2 ～ 12 | 0.4 ～ 12 | 3 ～ 20 | 12 ～ 25 | 3 ～ 20 | 2 ～ 13 | 16 ～ 20 | 1.5 ～ 6 | 0.2 ～ 6 | 6 ～ 12 | 0.2 ～ 2 | 3 ～ 12 | 5 ～ 12 | 3 ～ 16 | 1 ～ 3 | 3 ～ 20 | 2 ～ 12 | 2 ～ 12 | 3 ～ 12 | 2 ～ 10 | 2 ～ 20 | 4 ～ 16 |
| R Size(mm) | 0.2 ～ 3 | 0.05 ～ 1 | 0.2 ～ 2 | 0.1 ～ 3 | 0.05 ～ 1 | 0.3 ～ 4 | 0.2 ～ 2 | 0.05 ～ 1 | 0.2 ～ 2 | 0.1 ～ 3 | 0.1 ～ 3 | 0.5 ～ 2 | 0.3 ～ 4 | 0.1 ～ 3 | 0.2 ～ 3 | 0.5 ～ 3 | 0.2 ～ 5 | 0.1 ～ 4 | 0.1 ～ 4 | 0.1 ～ 3 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.2 ～ 1 | 0.2 ～ 1 | 0.1 ～ 1 | 0.2 ～ 2 | 1 ～ 3 | 0.2 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 0.2 ～ 2 | 0.05 ～ 1 | 1 ～ 2 | 0.02 ～ 0.5 | 0.3 ～ 3 | 0.2 ～ 2 | - | - | 0.1 ～ 4 | 0.5 ～ 2 | 0.5 ～ 2 | 0.75 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 |
| Blade length (ℓ)(mm) | 4 ～ 45 | 0.4 ～ 6 | 18 ～ 38 | 1.5 ～ 18 | 0.15 ～ 4 | 2 ～ 12 | 7.5 ～ 26 | 0.48 ～ 4.8 | 16 ～ 48 | 3 ～ 30 | 8 ～ 38 | 7 ～ 18 | 12 ～ 50 | 4 ～ 60 | 13 ～ 45 | 20 ～ 56 | 6 ～ 50 | 3 ～ 38 | 10 ～ 55 | 2 ～ 40 | 0.16 ～ 6 | 4.5 ～ 18 | 5 ～ 36 | 5 ～ 36 | 0.6 ～ 18 | 4.5 ～ 30 | 14 ～ 27 | 8 ～ 38 | 0.8 ～ 5.5 | 32 ～ 38 | 3 ～ 15 | 0.2 ～ 6 | 16 ～ 26 | 0.08 ～ 1.2 | 8 ～ 26 | 10 ～ 24 | 4.5 ～ 24 | 3 ～ 10 | 10 ～ 55 | 2 ～ 12 | 4 ～ 24 | 1.2 ～ 5 | 2 ～ 10 | 4 ～ 40 | 6 ～ 24 |
| Number of flutes(sheet) | 4 | 2 | 4 | 4 | 2 ～ 4 | 4 | 4 | 4 | 3 | 2 | 4 | 3 | 3 | 2 ～ 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 3 | 3 | 3 | 2 | 4 | 2 | 3 | 3 ～ 4 | 4 | 2 | 2 | 4 | 2 | 4 | 6 | 3 | 4 | 2 | 3 | 3 | 4 | 4 | 4 | 4 |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 120 | 60 ～ 100 | 40 ～ 75 | 50 ～ 110 | 45 ～ 75 | 45 ～ 75 | 50 ～ 120 | 60 ～ 110 | 50 ～ 75 | 50 ～ 100 | 60 ～ 100 | 39 ～ 104 | 40 ～ 125 | 90 ～ 180 | 90 ～ 160 | 50 ～ 120 | 50 ～ 100 | 50 ～ 160 | 40 ～ 110 | 40 ～ 100 | 80 ～ 160 | 40 ～ 80 | 40 ～ 80 | 40 ～ 100 | 60 ～ 200 | 90 ～ 110 | 50 ～ 105 | 60 ～ 110 | 115 ～ 125 | 45 ～ 50 | 50 ～ 100 | 90 ～ 120 | 48 ～ 53 | 60 ～ 80 | 60 ～ 80 | 60 ～ 120 | 60 | 50 ～ 160 | 50 ～ 100 | 50 ～ 100 | 60 ～ 110 | 50 ～ 90 | 50 ～ 130 | 70 ～ 180 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Aluminum[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎] | general steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Titanium[○/◎] / Copper[○/◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] |
| Shank diameter (d)(mm) | 4 ～ 20 | 4 ～ 6 | 6 ～ 12 | 4 ～ 12 | 4 ～ 6 | 3 ～ 12 | 6 ～ 12 | 4 ～ 6 | 6 ～ 16 | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 3 ～ 20 | 4 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 ～ 25 | 4 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 6 | 6 ～ 16 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 20 | 12 ～ 25 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 4 ～ 6 | 4 ～ 6 | 6 ～ 12 | 4 | 6 ～ 12 | 6 ～ 12 | 6 ～ 16 | 3 | 3 ～ 20 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 4 ～ 10 | 4 ～ 20 | 4 ～ 16 |
| Underneck length (ℓ1)(mm) | - | 1 ～ 60 | - | 14 ～ 45 | 0.5 ～ 60 | 6 ～ 36 | - | 2 ～ 48 | - | - | - | - | - | - | - | - | - | - | - | 17 ～ 45 | 1 ～ 60 | 24 ～ 105 | 23 ～ 50 | 23 ～ 50 | 2 ～ 50 | 12 ～ - | 40 ～ 56 | - | 5 ～ 24 | - | - | 0.5 ～ 30 | - | 0.5 ～ 10 | - | - | - | - | - | - | - | 7.5 ～ 24 | - | - | 28 ～ 120 |
| Machining Application | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface |
| Coating | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) / Non-Coated | TiAlN | TiAlN | TiAlN | - | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | Non-Coated | - | TiAlN | DLC | Non-Coated | TiAlN | TiAlN | TiCN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) / TiCN | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | TiAlN | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Type | radius | Long-Neck Radius | radius | radius | radius | Long-Neck Radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Tapered neck radius | Tapered neck radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | radius | radius | radius | radius | - | radius | radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | No torsion | Powerful Torsion (45°-60°) | - | Standard torsion (30-40°) | 45° | No torsion | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
| R Precision(μm) | ±0.02 | - | ±0.02 ～ 10 | ±0.01 ～ ±0.02 | - | - | 0～-0.030 ～ 0～-0.015 | - | ±0.02 | ±0.02 | ±0.02 | ±0.02 | - | ±0.02 | - | - | - | 0～-20 | 0～-20 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | - | -0.032～-0.059 ～ -0.014～-0.028 | - | - | - | - | - | - | - | 0.005～-0.005 | - | 0.01～-0.01 | - | - | 0～-20 | ±0.015 | ±0.015 | ±0.02 | ±0.015 | ±0.015 | ±0.015 |
![C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439283.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- OSG (28)
- KYOWA SEIKO (12)
- NS TOOL (12)
- UNION TOOL (8)
- NACHI(FUJIKOSHI) (7)
- 7 LEADERS (4)
- SANKO MFG (4)
- THE CUT (2)
- ATOM (1)
- DIJET (1)
- Poulten&Graf (1)
- WATERMILLS (1)
- OKAZAKI SEIKO (0)
- VAN HOORN (0)
- GUHRING (0)
- SANDVIK (0)
- TAIYO-TOOL (0)
CAD
-
- 2D
- 3D
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?