KTC(KYOTO TOOL) Vehicle Maintenance Tools（Page4）

• 

  Hub Puller For Slide Hammer Puller (For 4 Holes / 5 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Features]
  · This puller can be used for both 4 holes and 5 holes.
  · Features a 9.5 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	SGD 345.32
  Days to Ship:	9 Day(s)

• 

  Slide Hammer Puller Hub Puller (For 6 Holes)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing axle shafts, removing brake drums and extruding drive shafts.
  [Scope]
  · 6-hole type hub for vehicles.
  [Features]
  · Deep hole design makes this product compatible with front free-wheeling hubs for 4WD vehicles.
  · Features a 12.7 sq. square drive and a 27 mm width across flats, allowing rotation to be stopped with a drive tool or monkey wrench, etc.
  · Can be used with AUD4.

  Standard Price:	SGD 249.38
  Days to Ship:	8 Day(s)

• 

  Boot Band Cutter

  KTC(KYOTO TOOL)

  [Applications]
  · Cutting drive shaft boot bands and cutting boots.
  [Scope]
  · Stainless steel boot bands for drive shaft in mini cars to passenger cars.
  · Rubber drive shaft boot.
  [Features]
  · Can cut the boot band while it is attached.
  　Boots can also be cut, enabling work to be completed quickly.
  · After cutting the band, the boot can be cut without exchanging tools.
  · The spring opens the jaws easily, and the stopper ensures compact storage.
  　Pressing the stopper while handles are gripped fixes the handles in a closed state for convenient storage.

  Standard Price:	SGD 73.74
  Days to Ship:	Same day

• 

  Snap Ring Pliers AS403A

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	SGD 51.90
  Days to Ship:	9 Day(s)

• 

  Claw For AS403A

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Snap Ring Pliers AS403A.

  Standard Price:	SGD 48.70
  Days to Ship:	8 Day(s)

• 

  Snap Ring Pliers AS403B

  KTC(KYOTO TOOL)

  [Applications]
  · Use these pliers to remove (attach) snap rings that do not have a hooking hole.
  [Scope]
  
  · Normal type of snap ring with no hooking holes.
  · Thin claw tip is compatible even with rings having a narrow opening.
  
  · This tool is dedicated for snap rings that have a narrow opening and angled notches and are used in Honda vehicles
  · Claws are replaceable in the event of wear or damage.
  [Features]
  
  · Stepped tip shape increases stability when removing or attaching snap rings that were difficult to handle before.
  · Work from either above or from the side of the shaft.
  
  · Remove or attach Honda vehicle snap rings, which were difficult to handle before.

  Standard Price:	SGD 51.90
  Days to Ship:	9 Day(s)

• 

  Claw For AS403B

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Snap Ring Pliers AS403B.

  Standard Price:	SGD 51.60
  Days to Ship:	8 Day(s)

• 

  Drive Shaft Remover For Slide Hammer Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing the drive shaft from transaxles in FF vehicles.
  · This dedicated tool is used with slide hammer pullers (AUD3).

  Standard Price:	SGD 145.09
  Days to Ship:	8 Day(s)

• 

  Boot Band Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for clamp type boot bands on drive shafts used in automobiles.
  [Scope]
  · Compatible with mini to passenger cars equipped with clamp type boot bands. (Compatible with import vehicles)
  [Features]
  · Clamp the boot band easily just by screwing in the center bolt.
  · Compatible with ratchet handle, etc., for quick operations using light force. (Hexagon width across flats 14 mm)
  · Center bolt is flanged so the wrench does not deviate even when using offset wrench.
  · Handle grip is made of non-slip plastic.
  · Clamping section adopted a claw shape that does not rise up.

  Standard Price:	SGD 226.10
  Days to Ship:	7 Day(s)

• 

  Housing Nut Wrench (For Round Nut)

  KTC(KYOTO TOOL)

  [Applications]
  · Tightening and loosening rear housing nuts.
  [Scope]
  · Rear housing nuts used with compact vehicles (2 t class).
  [Features]
  · Compatible with a variety of models just by sliding the pin to the appropriate pitch.
  · Scale display is on the wrench body, simplifying centering work.

  Standard Price:	SGD 116.79
  Days to Ship:	7 Day(s)

• 

  Pin A (For Pin Hole Diameter ø6.8 To 9)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Housing Nut Wrench AS352.

  Standard Price:	SGD 37.24
  Days to Ship:	8 Day(s)

• 

  Pin B (For Pin Hole Diameter ø9.1 To 10)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Housing Nut Wrench AS352.

  Standard Price:	SGD 37.24
  Days to Ship:	8 Day(s)

• 

  Rear Hub Puller For Large Vehicle

  KTC(KYOTO TOOL)

  [Applications]
  · Removing rear wheel hubs on large vehicles.
  [Scope]
  · Rear wheel hubs on large vehicles (4 t or larger) that meet the following conditions.
  　· 8 or 10 holes (number of axle shaft mounting bolts)
  · P.C.D 140 mm to 188 mm
  · Axle shaft mounting bolt size M12 to M16
  [Features]
  · Vehicle's axle shaft mounting bolts are used so that aluminum wheels, etc., will not be damaged.
  · Just tighten with an offset wrench or socket (27 mm width across flats) and a drive tool.

  Standard Price:	SGD 483.29
  Days to Ship:	9 Day(s)

• 

  Front Hub Puller Arm For Large Vehicle

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Front Hub Puller for Large Vehicle AS354. (Includes 2 pcs)

  Standard Price:	SGD 159.76-
  Days to Ship:	8 Day(s)

• 

  Grease Exchanger Highload Assy

  KTC(KYOTO TOOL)

  [Features]
  · Exchangeable assembly to convert grease exchangers (GZ18) so they can be used for high loads. This assembly can be mounted only on the (A) type. Press the bellows under the lower cone and check for lock nut to determine compatibility.

  Standard Price:	SGD 470.05
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Locking Type Upper Cone

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	SGD 276.90
  Days to Ship:	8 Day(s)

• 

  Air Grease Feeder Nozzle (4 Pc Set)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Air Grease Feeder AVG35.

  Standard Price:	SGD 69.73
  Days to Ship:	9 Day(s)

• 

  Strut Spring Compressor Standard Arm (Outer Diameter 90 To 170)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	SGD 673.07
  Days to Ship:	8 Day(s)

• 

  Strut Spring Compressor Large Arm (Outer Diameter 135 to 220)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Strut Spring Compressor AS10.

  Standard Price:	SGD 886.30
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Aluminum Wheel Ornamental Nut

  KTC(KYOTO TOOL)

  [Features]
  · Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.

  Standard Price:	SGD 41.55-
  Days to Ship:	8 Day(s) or more

• 

  Wheel Cap Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Removing wheel caps for automobiles.
  [Features]
  · Thin shape is easy to insert between wheel rim and wheel cap and does not cause scratches.
  · With angle for making work easy.
  · Uses plastic grip which fits hand.

  Standard Price:	SGD 43.84
  Days to Ship:	7 Day(s)

• 

  Aluminum Wheel Center Cap Wrench

  KTC(KYOTO TOOL)

  [Features]
  ·The tip part is low profile, compact, scratch resistant, and easy to insert into the notch
  ·With 2 levels of angle for easy work
  ·Adoption of a resin grip that fits in your hand
  [Applications]
  ·Removal of aluminum wheel center cap for automobiles

  Standard Price:	SGD 24.23
  Days to Ship:	7 Day(s)

• 

  12.7 Sq. Impact Wrench Socket Set For Aluminum Wheel Ornamental Nuts

  KTC(KYOTO TOOL)

  [Features]
  · Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.

  Standard Price:	SGD 119.93
  Days to Ship:	9 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Wheel Nut (Long And Thin)

  KTC(KYOTO TOOL)

  [Features]
  · Rubber cushion protects plated nuts and ornamental nuts.
  · [Applications]
  · A dedicated socket wrench for tightening and loosening automobile wheel nuts. Compatible with impact wrenches.

  Standard Price:	SGD 32.36-
  Days to Ship:	8 Day(s) or more

• 

  19.0 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Standard Price:	SGD 51.61-
  Days to Ship:	7 Day(s)

• 

  25.4 Sq. Inner Socket For Impact Wrench

  KTC(KYOTO TOOL)

  Standard Price:	SGD 58.21-
  Days to Ship:	7 Day(s)

• 

  Brake Tool Set (For Drum Brakes) [12 Items]

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool set for disassembly, assembly and adjustment of automotive drum brakes.
  [Scope]
  · Drum brake systems in mini cars to compact trucks (up to 2 t class).

  Standard Price:	SGD 285.79
  Days to Ship:	8 Day(s)

• 

  Brake Tool Set (For Disc Brakes) [6 Items]

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool set for disassembly, assembly and adjustment of automotive disc brakes.
  [Scope]
  · Disc brake systems in mini cars to compact trucks (up to 2 t class).

  Standard Price:	SGD 328.82
  Days to Ship:	8 Day(s)

• 

  Brake Drum Screwdriver

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and attaching brake drum screws and door hinge bolts, etc.
  [Features]
  · T-shaped handle with thick non-slip grip is easy to apply force with.
  · Can also be used to remove and attach door hinge bolts, etc.

  Standard Price:	SGD 37.10
  Days to Ship:	7 Day(s)

• 

  Tension Spring Tool

  KTC(KYOTO TOOL)

  [Features]
  Has a curved shaft so that springs move smoothly.
  Grip is designed for a good fit, making assembly easier.

  Standard Price:	SGD 30.02
  Days to Ship:	7 Day(s)

• 

  T-Shaped Drum Remover

  KTC(KYOTO TOOL)

  [Scope]
  · Removal of brake drums mainly for mini cars.
  [Features]
  · The sliding handle allows brake drums to be removed easily without the handles interfering when using 2 removers.
  · Replaceable end screw section allows worn screw to be restored just by replacing the end screw.

  Standard Price:	SGD 37.14
  Days to Ship:	7 Day(s) or more

• 

  T-Shaped Drum Remover Bit

  KTC(KYOTO TOOL)

  [Features]
  · Service part for T-Shaped Drum Remover ABX9-06.

  Standard Price:	SGD 8.30
  Days to Ship:	7 Day(s)

• 

  Hubcap Pliers, HP-45130

  KTC(KYOTO TOOL)

  [Features]
  ·Since the claws bite into parallel, the hub cap is not easily damaged and can be easily removed
  ·Since the blade width can be adjusted in 6 steps, it can be applied to compact to medium-sized trucks
  [Applications]
  ·Hubcap removal

  Standard Price:	SGD 200.80
  Days to Ship:	8 Day(s)

• 

  Duo Serve Type Spring Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Use together with brake spring pliers to remove and assemble brake shoe return springs in most models.

  Standard Price:	SGD 62.19
  Days to Ship:	7 Day(s)

• 

  C Type Washer Tool

  KTC(KYOTO TOOL)

  [Applications]
  · Removing and attaching C type washers.
  [Features]
  · Dedicated claw for improved workability.
  · Speedily remove the C-washer by spreading it with the claw cleats and pushing it out from the flat side.

  Standard Price:	SGD 72.78
  Days to Ship:	7 Day(s)

• 

  Parking Shoe Lever Tool

  KTC(KYOTO TOOL)

  Connect and disconnect parking cables with a single touch.
  [Applications]
  · Connecting and disconnecting parking cables.
  [Features]
  · Dedicated claws have been adopted, ensuring that parking brake cables are not dislodged easily.

  Standard Price:	SGD 46.58
  Days to Ship:	7 Day(s)

• 

  Shoe Holding Spring Tool ABX-33

  KTC(KYOTO TOOL)

  [Applications]
  Removing and mounting shoes holding springs for passenger car drum brakes.
  Easy-to-grip shape is suitable for pushing and turning pins.

  Standard Price:	SGD 27.08
  Days to Ship:	7 Day(s)

• 

  Shoe Holding Spring Tool ABX-34

  KTC(KYOTO TOOL)

  [Applications]
  Removing and mounting shoes holding springs for passenger car drum brakes.
  The tapered cup holder secures the cup, enabling speedy work.

  Standard Price:	SGD 59.88
  Days to Ship:	8 Day(s)

• 

  Brake Spring Pliers Claw (With Pin)

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Brake Spring Pliers ASP-550.

  Standard Price:	SGD 44.20
  Days to Ship:	8 Day(s)

• 

  Disc Brake Piston Tool (For Single Piston)

  KTC(KYOTO TOOL)

  [Applications]
  · Compressing disc brake pistons (single piston type).
  [Features]
  · Can be used so that plate contacts the entire surface regardless of whether the arm is high or low.
  · Center screw has a ball, making it rotate smoothly.
  [Scope]
  · Compatible with single piston calipers for mini cars to small trucks (2 t class). (Not suitable for use with parking brake integrated brake calipers.)

  Standard Price:	SGD 111.55
  Days to Ship:	7 Day(s)

• 

  Disc Brake Piston Tool ABX10

  KTC(KYOTO TOOL)

  [Applications]
  · Compressing disc brake pistons (single piston / 2-piston type).
  [Features]
  · Use plates A and B accordingly for use with various models.
  [Scope]
  · Compatible with single piston calipers, parallel piston calipers and opposed 2-piston calipers for mini cars to small trucks (2 t class). (Not suitable for use with parking brake integrated brake calipers.)

  Standard Price:	SGD 158.71
  Days to Ship:	7 Day(s)

• 

  Brake Piston Resetter

  KTC(KYOTO TOOL)

  [Applications]
  · Dedicated tool for pressing back piston (single piston type) for brake calipers when replacing disc brake pads or during overhaul.
  [Features]
  · Just grip the lever to return the brake piston.
  · Rotating handle allows work to be performed from various postures.
  · Easily remove from calipers with one hand.
  · Parallel movement pushes the piston straight back without scratching it.
  [Scope]
  · Single piston brakes for mini cars to medium sized vehicles (2 t class). (Not suitable for use with parking brake integrated brake calipers.)

  Standard Price:	SGD 133.56
  Days to Ship:	7 Day(s)

• 

  Rubber Wheel For Bracket Sander

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Bracket Sander Set APS306 to 356.

  Standard Price:	SGD 60.51-
  Days to Ship:	8 Day(s)

• 

  Replenishment Paper Set For Bracket Sander

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Bracket Sander Set APS306 to 356.

  Standard Price:	SGD 36.10-
  Days to Ship:	8 Day(s)

• 

  Bracket Sander Set

  KTC(KYOTO TOOL)

  [Applications]
  · Cleaning brake shoe brackets in large vehicles.

  Standard Price:	SGD 74.14-
  Days to Ship:	8 Day(s)

Loading...