KTC(KYOTO TOOL) Vehicle Maintenance Tools（Product Type：Tire-Related）

• 

  Armature Bearing Puller

  KTC(KYOTO TOOL)

  [Features]
  · As the claw tip is thin, it can be used in narrow gaps.
  · Puller tool for pulling small bearings.

  Standard Price:	SGD 154.93-
  Days to Ship:	9 Day(s)

• 

  Ball Joint Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Use to separate ball joints.
  [Features]
  · Tough design with 2.5 t rated output
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Exchange claw and jaw depending on the work environment.
  · Comes with a "drop-prevention lanyard" for safety.

  Standard Price:	SGD 411.74
  Days to Ship:	7 Day(s)

• 

  12.7 Sq. Torque Wrench Dedicated For Wheel Nut

  KTC(KYOTO TOOL)

  [Applications]
  · Single-purpose torque wrench dedicated for automobile wheel nuts.
  · Compatible only with right rotation tightening. (Incompatible with reverse threads.)
  [Scope]
  · WCMPA085: Specified torque 85 N·m (Suzuki, Nissan mini cars)
  · WCMPA103: Specified torque 103 N·m (Toyota, Daihatsu)
  · WCMPA108: Specified torque 108 N·m (Nissan, Honda)
  [Features]
  · Manage torques with high accuracy by using settings dedicated for manufacturer-specified torques.
  · Total length is set at the optimum 420 mm to prevent tire and hand interference.
  · Judge the setting torque by the color of neck covers.
  · Adopted a ratchet head (36-tooth gear) to shorten work time.

  Standard Price:	SGD 240.90-
  Days to Ship:	7 Day(s) or more

• 

  Clip Clamp Pliers 20°

  KTC(KYOTO TOOL)

  [Applications]
  · Removing resin clips with removable 3-groove type lock pin used in automobile tire houses, under covers and bumpers, etc., and compression / insertion of shaft sections for easy mounting.
  [Scope]
  · Resin clip with removable 3-groove type lock pin used in Nissan, Suzuki and Mazda vehicles, etc., 2008 and later (when mounting clips: shaft diameter ø5 to ø10)
  [Features]
  · Since claws are simultaneously attached to the lock pin from 3 directions, the pin does not crack easily and makes work easier.

  Standard Price:	SGD 75.39
  Days to Ship:	9 Day(s)

• 

  Clip Clamp Pliers 20° / 80° 3-Claw Type Set (For Removing 3-Groove Type Lock Pin)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing resin clips with removable 3-groove type lock pin used in automobile tire houses, under covers and bumpers, etc., and compression / insertion of shaft sections for easy mounting.
  [Scope]
  · Resin clip with removable 3-groove type lock pin used in Nissan, Suzuki and Mazda vehicles, etc., 2008 and later (when mounting clips: shaft diameter ø5 to ø10)
  [Features]
  · Since claws are simultaneously attached to the lock pin from 3 directions, the pin does not crack easily and makes work easier.

  Standard Price:	SGD 141.94
  Days to Ship:	7 Day(s)

• 

  Lock Nut Chisel

  KTC(KYOTO TOOL)

  [Features]
  · It can be used to both remove the caulking of lock nuts and perform caulking.
  · As the tip has a boat shape, clean caulking can be produced simply by pushing in and striking.
  · The grip is made of rubber and flanged to prevent accidentally hitting hands.
  · Product is forged so is very robust.
  · The tip width is 4.5 mm.
  · A chisel for attaching/detaching lock nuts.

  Standard Price:	SGD 40.40
  Days to Ship:	9 Day(s)

• 

  Tie rod locknut wrench

  KTC(KYOTO TOOL)

  [Features]
  · Wrench shape securely holds the nut angle, enabling firm nut tightening and loosening without slipping.
  · Wide grip shape which helps prevent hand pain even when force is applied.
  · Since the size scale is displayed, it can be set to the size suitable for the nut to be used.
  · Wrench for tightening/loosening tie rod ends.

  Standard Price:	SGD 64.75
  Days to Ship:	9 Day(s)

• 

  Straight Connector

  KTC(KYOTO TOOL)

  [Features]
  · Connector included with tire air gauge AGT231.
  · Also compatible with AGT232.
  · Thin connector with ø11 mm tip.

  Standard Price:	SGD 104.74
  Days to Ship:	8 Day(s)

• 

  Double Connector

  KTC(KYOTO TOOL)

  [Features]
  · Connector included with tire air gauge AGT232.
  · Also compatible with AGT231.
  · Double connector can be used from either direction.

  Standard Price:	SGD 97.71
  Days to Ship:	9 Day(s)

• 

  Clip Connector

  KTC(KYOTO TOOL)

  [Features]
  · Replacement tip connector for tire air gauge AGT231 and AGT232.
  · Designed with clip for securing valves.

  Standard Price:	SGD 72.99
  Days to Ship:	8 Day(s)

• 

  Step Board

  KTC(KYOTO TOOL)

  [Features]
  · Side slip board included with side slip board set ATG92.

  Standard Price:	SGD 282.47
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator (Offset Type)

  KTC(KYOTO TOOL)

  [Applications]
  · Separation of tie rod end.
  [Features]
  · Tough design for increased power.
  · Rated output is set to 15 kN (1.5 t) and maximum output is set to 30 kN (3 t).
  · Supports a larger output compared to conventional part (KTC BJU-1945).
  · Highly durable design.
  · The offset shape increases durability.
  · Fits various models perfectly.
  · Range of opening: 16 mm to 50 mm
  · Suitable for tie rod ends used in mini cars to 3 L class automobiles.
  · Easy operation increases efficiency.
  · Mount and remove just by operating the thrust bolt.
  · Perform work easily with drive tools.
  · Adopted a 9.5 sq. square drive. Can hold reaction force with drive tools.
  · Comes with a "drop-prevention lanyard" for safety.

  Standard Price:	SGD 199.23
  Days to Ship:	9 Day(s)

• 

  Tie Rod End Separator Claw

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Ball Joint Separator AS202A.

  Standard Price:	SGD 116.79
  Days to Ship:	8 Day(s)

• 

  Tie Rod End Separator Jaw

  KTC(KYOTO TOOL)

  [Features]
  · Service part for Ball Joint Separator AS202A.

  Standard Price:	SGD 98.87
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Hub Nut Socket For Impact Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Set of AS308-30W and 32W impact sockets for loosening double hexagon shape front (rear) axle hub nuts. Adopted the AMBAC system (PAT.) to prevent the pin from falling out during use.

  Standard Price:	SGD 48.46-
  Days to Ship:	9 Day(s)

• 

  12.7 Sq. Hub Nut Socket Set For Impact Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · For using impact wrenches to loosen double hexagon shaped front (rear) axle hub nuts in Toyota vehicles.
  [Features]
  · The impact wrench socket has a double hexagon shape to match the shape of the hub nut.
  · Deep opening and thin outer diameter shape matches the shape of the hub nut.
  · Total 75 mm long semi-deep type that does not interfere with drive shaft threads.

  Standard Price:	SGD 89.44
  Days to Ship:	9 Day(s)

• 

  Pitman Arm Puller

  KTC(KYOTO TOOL)

  [Applications]
  · Removing pitman arms.
  [Features]
  · The heat-treated forged claw has outstanding durability.
  · Comes with a "drop-prevention lanyard" for safety.
  · The claws bite inward when the center screw is tightened.
  [Scope]
  · Pitman outer diameter ø37 to ø47

  Standard Price:	SGD 293.28
  Days to Ship:	8 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Aluminum Wheel Ornamental Nut

  KTC(KYOTO TOOL)

  [Features]
  · Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.

  Standard Price:	SGD 41.55-
  Days to Ship:	8 Day(s) or more

• 

  Wheel Cap Wrench

  KTC(KYOTO TOOL)

  [Applications]
  · Removing wheel caps for automobiles.
  [Features]
  · Thin shape is easy to insert between wheel rim and wheel cap and does not cause scratches.
  · With angle for making work easy.
  · Uses plastic grip which fits hand.

  Standard Price:	SGD 43.84
  Days to Ship:	7 Day(s)

• 

  Aluminum Wheel Center Cap Wrench

  KTC(KYOTO TOOL)

  [Features]
  ·The tip part is low profile, compact, scratch resistant, and easy to insert into the notch
  ·With 2 levels of angle for easy work
  ·Adoption of a resin grip that fits in your hand
  [Applications]
  ·Removal of aluminum wheel center cap for automobiles

  Standard Price:	SGD 24.23
  Days to Ship:	7 Day(s)

• 

  12.7 Sq. Impact Wrench Socket Set For Aluminum Wheel Ornamental Nuts

  KTC(KYOTO TOOL)

  [Features]
  · Use this wrench to tighten and loosen ornamental nuts on aluminum wheels. Thin type with minimum outer diameter, having a rubber cushion to protect ornamental nuts from damage.

  Standard Price:	SGD 119.93
  Days to Ship:	9 Day(s)

• 

  12.7 Sq. Impact Wrench Socket For Wheel Nut (Long And Thin)

  KTC(KYOTO TOOL)

  [Features]
  · Rubber cushion protects plated nuts and ornamental nuts.
  · [Applications]
  · A dedicated socket wrench for tightening and loosening automobile wheel nuts. Compatible with impact wrenches.

  Standard Price:	SGD 32.36-
  Days to Ship:	8 Day(s) or more

• 

  Hub Cap Pliers HP-350S

  KTC(KYOTO TOOL)

  [Applications]
  · Removing hub caps.
  [Features]
  · Non-scratch pliers that can be operated with a single touch.
  · Shaped to effortlessly lift up cap.
  · Free size is compatible with a variety of automobile models.

  Standard Price:	SGD 133.70
  Days to Ship:	9 Day(s)

• 

  Hubcap Pliers, HP-45130

  KTC(KYOTO TOOL)

  [Features]
  ·Since the claws bite into parallel, the hub cap is not easily damaged and can be easily removed
  ·Since the blade width can be adjusted in 6 steps, it can be applied to compact to medium-sized trucks
  [Applications]
  ·Hubcap removal

  Standard Price:	SGD 200.80
  Days to Ship:	8 Day(s)

• 

  Clip Clamp Pliers 80° (For Removing 3-Pin Type Lock Pin)

  KTC(KYOTO TOOL)

  [Applications]
  · Removing resin clips with removable 3-groove type lock pin used in automobile tire houses, under covers and bumpers, etc., and compression / insertion of shaft sections for easy mounting.
  [Scope]
  · Resin clip with removable 3-groove type lock pin used in Nissan, Suzuki and Mazda vehicles, etc., 2008 and later (when mounting clips: shaft diameter ø5 to ø10)
  [Features]
  · Since claws are simultaneously attached to the lock pin from 3 directions, the pin does not crack easily and makes work easier.

  Standard Price:	SGD 75.39
  Days to Ship:	9 Day(s)

• 

  Clip Clamp Pliers 80° Short Type For Tire House

  KTC(KYOTO TOOL)

  [Applications]
  · Removing resin clips with removable type lock pin used in front or rear bumpers and front fender liners, etc., of vehicles and compressing / inserting shafts for easy mounting.
  [Scope]
  · Resin clips with removable 2-groove or 4-groove lock pin.
  　(When mounting clips: shaft diameter ø5 to ø10)
  [Features]
  · Has a short overall length with little interference, allowing use without removing tires.

  Standard Price:	SGD 75.39
  Days to Ship:	9 Day(s)

• 

  Tire Lever MCOL-260

  KTC(KYOTO TOOL)

  [Features]
  · Thin and smooth tip is easy to insert even between the rim and side bead, allowing work to be performed smoothly.
  · Appropriate heat treatment has been applied, ensuring outstanding durability.
  · The grip is made of oil-resistant rubber and has a shape that makes it easy to grip and apply force.

  Standard Price:	SGD 42.72
  Days to Ship:	7 Day(s)

• 

  Tire Valve Wrench

  KTC(KYOTO TOOL)

  [Features]
  · Has a compact total length of 35 mm and can be used for models where the conventional long types could not be used.
  · Indispensable for repairing flat tires and replacing tires / tubes.

  Standard Price:	SGD 14.70
  Days to Ship:	9 Day(s)

• 

  Tire Lever, OHZ-210

  KTC(KYOTO TOOL)

  [Features]
  ·With an overall length of 210 mm, it is convenient to carry when touring
  ·It is a forged product with appropriate heat treatment, so it has excellent durability

  Standard Price:	SGD 24.68
  Days to Ship:	8 Day(s)

Loading...