(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Ejector Sleeves
| Days to Ship |
|
|---|
-
Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-
MISUMI
If your product inquiries are out of catalogue, we can support by drawing (Made to order). Please contact PM_BD@misumi.co.th
Days to Ship: 6 Day(s) -
Short Ejector Sleeves (Bushings For Ejector Pins)
MISUMI
Short ejector sleeve (bush for ejector pin) with die steel SKD61 + nitriding, coaxiality ◎0.06, and 4mm collar thickness.
Days to Ship: 6 Day(s) -
Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-
MISUMI
This is an ejector sleeve whose tip wall thickness can be set to a minimum of 0.6mm. Compared to regular products, this product allows you to select the length of the inner sliding part (S dimension) up to 50mm.
Days to Ship: 6 Day(s) -
Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, fixed shaft diameter/specified type.
Days to Ship: 6 Day(s) or more -
Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-
MISUMI
Die steel SKD61+ nitrided, coaxiality ◎0.06, collar thickness 4mm, fixed length type straight ejector sleeve.
- Volume Discount
Days to Ship: 3 Day(s) or more -
Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, fixed length type.
Days to Ship: 5 Day(s) or more -
Short Ejector Sleeves (Bushings for straight ejector pins)
MISUMI
This is an ejector sleeve whose total length (L dimension) can be set to a minimum of 15mm. The wall thickness at the tip can be set to a minimum of 0.6mm, and the length from the sliding part to the relief hole is tapered.
Days to Ship: 6 Day(s) or more -
Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-
MISUMI
Die steel SKD61+ nitrided, coaxiality ◎0.03, collar thickness 4mm, fixed length type straight ejector sleeve.
Days to Ship: 6 Day(s) -
Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61+ nitriding, coaxiality ◎0.03, collar thickness 4mm, total length specified type.
Days to Ship: 6 Day(s) -
Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness 4mm, total length specified type.
Days to Ship: 5 Day(s) or more -
Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, fixed shaft diameter/specified type.
Days to Ship: 6 Day(s) or more -
Straight Ejectr Sleeve M2 / Wall thickness 0.3mm / Taper type
MISUMI
This is an ejector sleeve that can be set to a thin wall with a minimum wall thickness of 0.3 mm at the tip. It has a tapered shape from the sliding part to the escape hole. In addition, the coaxiality is 0.003/0.005, making it a more accurate product than usual.
Days to Ship: 6 Day(s) or more -
MISUMI
Straight ejector sleeve with die steel SKD61+ nitrided, coaxiality ◎0.03, collar thickness 4mm, fixed shaft diameter/specified type.
Days to Ship: 6 Day(s) -
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.03, collar thickness JIS, fixed shaft diameter/specified type.
Days to Ship: 6 Day(s) -
Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-
MISUMI
Straight ejector sleeve with die steel SKD61 + nitriding, coaxiality ◎0.06, collar thickness JIS, total length specified type.
Days to Ship: 5 Day(s) or more -
MISUMI
This is a stepped ejector sleeve that is different from the straight type. The wall thickness at the tip can be set to a minimum of 0.3mm, making it thinner than regular products. It has a tapered shape from the sliding part to the escape hole.
Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| D/P (Shaft diameter)(mm) |
| V (Hole diameter)(mm) |
| Material |
| Head thickness |
| Product composition |
| Concentricity between the hole and shaft diameters |
| Shaft diameter tolerance |
| Inner dia. tolerance |
| Surface treatment |
| Boring method |
| Tapered or not |
| Center pin tip shape |
| P (Tip diameter)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type- | Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type- | Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type- | Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type- | Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type- | Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type- | Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type- | Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type- | Straight Ejectr Sleeve M2 / Wall thickness 0.3mm / Taper type | Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type- | ||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 6 Day(s) | 6 Day(s) | 6 Day(s) | 6 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) | 6 Day(s) | 5 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) | 6 Day(s) | 5 Day(s) or more | 6 Day(s) or more |
| D/P (Shaft diameter)(mm) | 3.2 ～ 14 | 4 ～ 10 | 3.2 ～ 14 | 3.5 ～ 20 | 4 ～ 16 | 4 ～ 20 | 2.5 ～ 8 | 4 ～ 10 | 4 ～ 10 | 4 ～ 16 | 3.5 ～ 20 | - | 3.5 ～ 10 | 3.5 ～ 10 | 4 ～ 20 | 3 ～ 8 |
| V (Hole diameter)(mm) | 0.8 ～ 12.2 | 1.5 ～ 8 | 0.8 ～ 12.2 | 1.5 ～ 16 | 1.5 ～ 12 | 1.5 ～ 15 | 1 ～ 6.8 | 1.5 ～ 8 | 1.5 ～ 8 | 1.5 ～ 12 | 1.5 ～ 16 | - | 1.5 ～ 8 | 1.5 ～ 7.9 | 1.5 ～ 15 | 1 ～ 6 |
| Material | SKH51 | SKD61 | SKH51 | SKD61 | SKD61 | SKD61 | SKH51 | SKD61 | SKD61 | SKD61 | SKD61 | - | SKD61 | SKD61 | SKD61 | SKH51 |
| Head thickness | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) / 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) | 6mm(JIS) / 8mm(JIS) | 4mm(T4) | 4mm(T4) | 4mm(T4) | 4mm(T4) | 6mm(JIS) / 8mm(JIS) | - | 4mm(T4) | 6mm(JIS) / 8mm(JIS) | 6mm(JIS) / 8mm(JIS) | 4mm(T4) |
| Product composition | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | Single sleeve | - | Single sleeve | Single sleeve | Single sleeve | Single sleeve |
| Concentricity between the hole and shaft diameters | ◎0.005 / ◎0.01 | ◎0.06 | ◎0.01 | ◎0.06 | ◎0.06 | ◎0.06 | ◎0.01 | ◎0.03 | ◎0.03 | ◎0.06 | ◎0.06 | - | ◎0.03 | ◎0.03 | ◎0.06 | ◎0.005 |
| Shaft diameter tolerance | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 / -0.01/-0.03 | 0/-0.005 / -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 / -0.01/-0.03 | - | -0.01/-0.02 | -0.01/-0.02 | -0.01/-0.02 / -0.01/-0.03 | 0/-0.005 |
| Inner dia. tolerance | +0.005/0 / +0.01/0 | H7 | +0.01/0 | H7 | H7 | H7 | +0.005/0 / +0.01/0 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | +0.005/0 |
| Surface treatment | No | Nitrided | No | Nitrided | Nitrided | Nitrided | No | Nitrided | Nitrided | Nitrided | Nitrided | - | Nitrided | Nitrided | Nitrided | No |
| Boring method | Grinding | Reaming | Wire cutting & polishing | Reaming | Reaming | Reaming | - | Reaming | Reaming | Reaming | Reaming | - | Reaming | Reaming | Reaming | Grinding |
| Tapered or not | No | No | No | No | No | No | Yes | No | No | No | No | - | No | No | No | Yes |
| Center pin tip shape | No | No | No | No | No | No | No | No | No | No | No | - | No | No | No | No |
| P (Tip diameter)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 8 |
Loading...
Configure
Specification/Dimensions
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
Material
-
Head thickness
-
Product composition
-
Concentricity between the hole and shaft diameters
-
Shaft diameter tolerance
-
Inner dia. tolerance
-
Surface treatment
-
Boring method
-
Tapered or not
- Yes
- No
-
Center pin tip shape
-
P (Tip diameter)(mm)
[2.5-8/0.01mm Unit(s)]
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Ejector Sleeves
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?