(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Short Ejector Sleeves (Bushings for straight ejector pins)

Short Ejector Sleeves (Bushings for straight ejector pins)

Click this image to zoom it.

Move the mouse over the image to zoom

This is an ejector sleeve whose total length (L dimension) can be set to a minimum of 15mm. The wall thickness at the tip can be set to a minimum of 0.6mm, and the length from the sliding part to the relief hole is tapered.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
EPBB-H2.5-[15-50/0.01]-V[1-1.3/0.01]
EPBB-H3-[15-50/0.01]-V[1.31-1.8/0.01]
EPBB-H4-[15-50/0.01]-V[1.91-2.8/0.01]
EPBB-H5-[15-50/0.01]-V[2.91-3.8/0.01]
EPBB-H6-[15-50/0.01]-V[3.91-4.8/0.01]
EPBB-H7-[15-50/0.01]-V[4.91-5.8/0.01]
EPBB-H8-[15-50/0.01]-V[5.81-6.8/0.01]
EPBB-M2.5-[15-50/0.01]-V[1-1.3/0.01]
EPBB-M3-[15-50/0.01]-V[1.31-1.8/0.01]
EPBB-M4-[15-50/0.01]-V[1.91-2.8/0.01]
EPBB-M5-[15-50/0.01]-V[2.91-3.8/0.01]
EPBB-M6-[15-50/0.01]-V[3.91-4.8/0.01]
EPBB-M7-[15-50/0.01]-V[4.91-5.8/0.01]
EPBB-M8-[15-50/0.01]-V[5.81-6.8/0.01]
EPBBH2.5-[15-50/0.01]-V[1-1.3/0.01]
EPBBH3-[15-50/0.01]-V[1.31-1.8/0.01]
EPBBH4-[15-50/0.01]-V[1.91-2.8/0.01]
EPBBH5-[15-50/0.01]-V[2.91-3.8/0.01]
EPBBH6-[15-50/0.01]-V[3.91-4.8/0.01]
EPBBH7-[15-50/0.01]-V[4.91-5.8/0.01]
EPBBH8-[15-50/0.01]-V[5.81-6.8/0.01]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSShaft diameter tolerance D/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
Inner dia. tolerance L (L dimension)
(mm)

-

1 Piece(s) 6 Day(s) or more 100/-0.0052.51 ~ 1.3+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00531.31 ~ 1.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00541.91 ~ 2.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00552.91 ~ 3.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00563.91 ~ 4.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00574.91 ~ 5.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00585.81 ~ 6.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.022.51 ~ 1.3+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.0231.31 ~ 1.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.0241.91 ~ 2.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.0252.91 ~ 3.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.0263.91 ~ 4.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.0274.91 ~ 5.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 10-0.01/-0.0285.81 ~ 6.8+0.01/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.0052.51 ~ 1.3+0.005/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00531.31 ~ 1.8+0.005/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00541.91 ~ 2.8+0.005/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00552.91 ~ 3.8+0.005/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00563.91 ~ 4.8+0.005/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00574.91 ~ 5.8+0.005/015 ~ 50

-

1 Piece(s) 6 Day(s) or more 100/-0.00585.81 ~ 6.8+0.005/015 ~ 50

Loading...

  1. 1
 

Basic Information

Product composition Single sleeve Material SKH51 Surface treatment No
Head thickness 4mm(T4) Concentricity between the hole and shaft diameters ◎0.01 Tapered or not Yes
Center pin tip shape No

Tech Support

Mold
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)