Conveyer Rollers

• 

  Conveyor Rollers-Metal/Steel

  MISUMI

  Roller for metal conveyor with bearing. Materials can be selected from steel, aluminum alloy, and stainless steel (SUS304).

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.46-
  Days to Ship:	Same day or more

• 

  Motor Rollers-Built in Motor

  MISUMI

  Unlike regular rollers, this conveyor roller has a built-in motor and reducer. Since there is no need to provide a separate motor space, it helps save space in automatic conveyance equipment.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.25-
  Days to Ship:	Same day or more

• 

  MDR, DC Brushless Standard Motor ø48.6

  ITOUDENKI

  [Features]·Pipe diameter is ø48.6 roller. ·Thickness is t1.4.

  Standard Price:	SGD 255.73-
  Days to Ship:	15 Day(s) or more

• 

  Conveyor Rollers-Urethane Lined Type

  MISUMI

  Urethane lined conveyor roller with bearing. The core metal material can be selected from steel, aluminum alloy, and stainless steel (SUS304).
  Please refer to the specification table for roller strength.
  The shore (hardness) of urethane is A90, A70, A50, and the color is natural. Urethane thickness can be selected from 3, 4, and 5.
  A90 is ether urethane, A50/A70 is ester urethane.
  Additionally, the urethane of Shore A90 can be changed to antistatic urethane through additional machining (UDC).

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  MDR Brushless Standard Motor PM500FE

  ITOUDENKI

  Pipe diameter ⌀50 roller.
  [Features]
  ·Energy saving power consumption 60+α.
  ·Run-on-demand transport that drives only the parts that are needed when needed reduces power consumption by up to 60% compared to the drive method that uses a single external AC motor.
  ·Achieves high torque and high speed transfer.
  ·Creating a safe and comfortable space. The power supply is a 24 V DC safe low-voltage power supply that does not pose a risk of electric shock.
  ·Excellent controllability (speed control, stopping accuracy, constant speed transport).
  ·Achieved programless operation without PLC.
  ·connection with network systems.
  ·Significant reduction in total cost. Reduce power consumption with energy-saving transportation and airless.

  Standard Price:	SGD 293.45-
  Days to Ship:	15 Day(s) or more

• 

  MDR Brushless Standard Motor PM605FE

  ITOUDENKI

  [Features]·Pipe diameter ø60.5 roller. ·Thickness is t3.2.

  Standard Price:	SGD 306.03-
  Days to Ship:	18 Day(s) or more

• 

  Roller with Sprocket

  MISUMI

  Conveyor roller with sprocket. The material of the roller is steel, and the material of the sprocket is S45C.
  The number of sprocket teeth is 10, and the compatible chain is CHE40. The length of the roller part can be selected from 100, 200, 300, 400, and 500. Manufacturer recommended axis: Φ11.9 (+0,-0.1)

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Roller with Shaft (Stainless Steel)

  TRUSCO NAKAYAMA

  [Features]
  - This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.

  Standard Price:	SGD 58.62-
  Days to Ship:	10 Day(s)

• 

  Motor Roller PSS Type

  OKURA

  ø57 standard type roller width from 305 up to 990 mm can be specified.
  [Features]
  ・ This is a compatible general-purpose motor roller with the same diameter (ø57) as the SR type free roller.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 294.00-
  Days to Ship:	13 Day(s) or more

• 

  Free Roller for Light Loads (30 kg or Less)

  ITOUDENKI

  [Features]·For light duties (30 kg or less). [Materials]·STKM.

  Standard Price:	SGD 70.44-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200

  MAKITECH

  Ultra-fine φ10 stainless steel roller which employs a standard bearing. Roller unit parts for RS-1010, suitable for small item transport.
  
  [Features]
  · The roller diameter is φ10.0. The roller interval is P12.4.
  · Standard roller width (nominal) is 50W to 200W in increments of 50mm.
  · Standard bearing: high durability.
  · Aluminum extrusion

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  MDR Brushless Motor Pulley, PM320HS Series

  ITOUDENKI

  A pulley for use with driven belt conveyors

  Standard Price:	SGD 243.15-
  Days to Ship:	21 Day(s) or more

• 

  MDR, DC Brushless Standard Motor ø57

  ITOUDENKI

  Roller with a pipe diameter of ø57.
  [Features]
  · Energy-saving on power consumption of up to 60%.
  · Run-on-demand transport drives only the necessary parts of the line when needed, reducing electrical energy consumption by up to 60% compared to the drive system of a single externally installed AC motor. Moreover, thanks to its airless effect, you can expect energy savings.
  · Achieves high torque and high-speed transportation.
  · Creates a safe and comfortable space. The 24 V DC power supply is a safe low-voltage power supply which means there is no danger from electrocution accidents.
  · Excellent control (speed control, stopping accuracy and fixed speed transportation).
  · Achieves a non-program environment without needing PLC.
  · Connects to network systems.
  · Drastically reduces total costs. Reduces power consumption by using energy saving transportation and airlessness.

  Standard Price:	SGD 280.88-
  Days to Ship:	18 Day(s) or more

• 

  Conveyor Roller Shafts

  MISUMI

  conveyor roller shaft that is compatible with MISUMI's conveyor rollers and conveyor mini rollers. (Excluding HROB and HROBU.)
  
  [Type] Roller shaft
  [Material] Steel (equivalent to S45C), stainless steel (SUS304)
  [Surface treatment] Steel: No surface treatment, 4 Iron trioxide film/electroless nickel plating
  [Shaft end shape] Available in 4 types, and length can be specified in 1 mm increments from 60 to 550.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø38 × Width 90-690 (QR Model)

  OKURA

  Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 15.29-
  Days to Ship:	4 Day(s) or more

• 

  Motor Roller, Accumulator Type, Diameter ⌀57 × Width 240 - 990 (PAS Type)

  OKURA

  Can be held for long periods while still energized. Transport distance and roller width can be specified within the range of 240 – 990 mm.
  
  [Features]
  • With a built-in high impedance, low-current motor and inhibition of lock (holding) current to levels comparable to a PWS no-load current, this product is optimal for accumulator lines which are held for a long period of time while energized.

  Standard Price:	SGD 263.07
  Days to Ship:	16 Day(s) or more

• 

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
  [Features]
  ·For medium and heavy loads. A double labyrinth seal is used for the seal part.
  ·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
  ·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
  ·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
  [Applications]
  ·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
  ·Because it contains bearings, it can rotate more smoothly.
  ·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Standard Price:	SGD 38.30-
  Days to Ship:	12 Day(s) or more

• 

  Roller with Axel (Steel)

  TRUSCO NAKAYAMA

  [Features]
  ● This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads, 57 mm for moderate loads, and 60.5 mm for moderate loads.

  Standard Price:	SGD 12.00-
  Days to Ship:	4 Day(s) or more

• 

  Steel Roller, S Series (S-1912P) Diameter φ19.1 × Width 90 - 490

  MAKITECH

  Small-diameter φ19 steel roller. Roller unit parts for S-1912P roller conveyor, suitable for small item transport.
  
  [Features]
  ·Roller diameter is φ19.1. Minimum roller spacing is P22.
  · Standard roller width (nominal) is the standard size of 90W to 490W.
  · Configurable size is available.
  · The pressed-in bearing, inexpensive φ19 type is a big seller.
  · Model 60 frame

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-5721NB)

  MAKITECH

  φ 57 mm, T2.6 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5721NB roller conveyor.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Roller Single Unit FMS57R With Shaft for Medium Loads, Roller Conveyor

  MEIKIKOU

  *Sold as a roller unit.
  
  [Features]
  - Roller is 2.1 mm thick and can withstand shock better than the FMC57R roller.

  Standard Price:	SGD 19.12-
  Days to Ship:	10 Day(s) or more

• 

  Conveyor Roller (for Light Loads) SERIES FF1

  FUJI SEISAKUSHO

  [Features]
  Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.

  Standard Price:	SGD 9.26-
  Days to Ship:	4 Day(s) or more

• 

  AC Roller for Medium and Light Loads, ø48.6

  ITOUDENKI

  [Features]·ø48.6 roller for medium and light duties. ·Thickness is t1.4.

  Standard Price:	SGD 236.87
  Days to Ship:	66 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)

  OKURA

  Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

  Standard Price:	SGD 21.05-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)

  OKURA

  Roller diameter of ⌀42.7 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 49.62-
  Days to Ship:	5 Day(s) or more

• 

  Roller shaft FMC57R for load in the roller conveyor

  MEIKIKOU

  * Sold as a single shaft unit.

  Standard Price:	SGD 4.68-
  Days to Ship:	10 Day(s) or more

• 

  Return Roller R Type

  JAPAN ROLLER

  One of the most widely used JIS standard steel tube roller. Roller that supports the belt on the return side.

  Standard Price:	SGD 108.86-
  Days to Ship:	13 Day(s) or more

• 

  Motor Roller PSS-V Type

  OKURA

  ø57, V pulley type, roller width 390 to 990 mm can be specified.
  [Features]
  ・ As a drive roller with a V pulley, a free roller of the same shape is linked with a sewing-machine belt.
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 445.94-
  Days to Ship:	14 Day(s) or more

• 

  Motor Roller PSL Type

  OKURA

  ø48.6 Standard type Roller width 305 to 690 mm can be specified.
  [Features]
  ・ It is a general-purpose type motor roller that has the same diameter (ø48.6) as the LR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 343.42-
  Days to Ship:	16 Day(s) or more

• 

  Motor Roller PSP Type

  OKURA

  ø42.7 standard type roller width 305 to 690 mm can be specified.
  [Features]
  ・ It is a general-purpose type motor roller that has the same diameter ø42.7) as the PR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 289.05-
  Days to Ship:	13 Day(s) or more

• 

  Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)

  OKURA

  Dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

  Standard Price:	SGD 64.16-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)

  OKURA

  Medium load ⌀48.6 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

  Standard Price:	SGD 18.10-
  Days to Ship:	5 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø57 × Width 90-990 (SR Type)

  OKURA

  [Features]
  • Medium load ⌀57 steel roller.
  • Transport length and roller width can be specified within the range of 90 - 990 mm.

  Standard Price:	SGD 18.80-
  Days to Ship:	4 Day(s) or more

• 

  Steel Roller, M Series (HG-R1210A), Diameter φ12.0 x Width 100 - 400

  MAKITECH

  Superfine φ 12 steel roller. Individual roller for HG-R1210A roller conveyor, which is optimal for light/small item transport. The widths can be specified in 1 mm increments from 50 to 400 mm.
  
  [Features]
  · The roller diameter is 12.0 mm. The minimum roller interval is P15.
  · The standard roller width (nominal) is 100 to 400 mm at intervals of 50 mm.
  · Configurable size is available.
  · Machined bearings: high quality.
  · One of the most popular φ 12 diameter roller products on the market.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Roller, M Series (RS-3810), Diameter φ 38.1 × Width 100 - 600

  MAKITECH

  A general purpose ⌀ 38-mm stainless steel roller. A cost-effective RS-3810 roller conveyor roller unit manufactured entirely from stainless steel.
  
  [Features]
  · The roller diameter is ⌀ 38.1 mm. The minimum roller interval is P50.
  · The standard roller width (nominal) is 100–600 mm in increments of 50 mm.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790

  MAKITECH

  [Features]
  - φ42 stainless steel roller.
  Individual roller for SS-4212 moderate load roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller (Conveyor Roller) M Series (R-1912P)

  MAKITECH

  Popular φ19 individual roller for low-cost R-1912P roller conveyor, which is optimal for light / small item transport. The widths can be specified in 1 mm increments from 100 to 500 mm.
  
  [Features]
  · The roller diameter is φ19.1. The minimum roller interval is P20.
  · Standard roller width (nominal) is 100W to 500W in 50mm increments.
  · Can be manufactured to desired size.
  · Popular product, pressed-in bearing, inexpensive type, and φ19.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Stainless steel roller (conveyor roller) M Series (RS-6015) diameter φ 60.5 x width100-1000

  MAKITECH

  A resin flanged φ 60 stainless steel roller for moderate to light loads. Replaceable bearings. Roller unit of the RS-6015 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 800 mm at intervals of 50 mm.
  · Configurable size is available.
  · Standard bearing: high quality.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Roller Single Unit FLB38R With Shaft for Light Loads, Roller Conveyor

  MEIKIKOU

  *Sold as a roller unit.
  
  [Features]
  · A versatile standard type suitable for transporting products with soft bases, such as cardboard cases

  Standard Price:	SGD 15.50-
  Days to Ship:	4 Day(s) or more

• 

  AC Medium/Heavy-Duty Roller ø57

  ITOUDENKI

  [Features]·ø57 roller for medium and heavy duties. ·Thickness is t1.5.

  Standard Price:	SGD 211.71-
  Days to Ship:	12 Day(s) or more

• 

  Motor Roller PSM Type

  OKURA

  ø60.5, standard type, roller width 305 to 990 mm can be specified.
  [Features]
  ・ A general-purpose type motor roller that has the same diameter (ø60.5) as the MR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 311.30-
  Days to Ship:	14 Day(s) or more

• 

  Motor Roller PNS Type

  OKURA

  Taper skate wheel type for ø57 × R900, roller width 305 to 790 mm can be specified.
  [Features]
  ・ A taper skate wheel type for smoothly curving medium-load transported objects.
  ・ The curve radius is R900.

  Standard Price:	SGD 469.40-
  Days to Ship:	18 Day(s) or more

Loading...