(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our operating hours are from 9:00~15:00 during the upcoming Hari Raya Haji Holiday 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Carbide Square End Mills（work material：Copper Page3）
[What is a carbide square end mill?]
A type of milling cutter. It is a tool that can perform complicated shaping such as linear or non-linear side surfaces inside grooves and holes, by using a carbide base material, with a cutting edge on the outside or the end surface, and moving the rotated tool in multiple directions. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry.
Search by specifying the lower class category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Days to Ship |
|
|---|
-
XAL Series Carbide Square End Mill 4-Flute / Blade Length 1.5D (Stub) Type
MISUMI
Also effective for high speed machining
- Volume Discount
- XAL
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: SGD 15.18- Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.Standard Price: SGD 17.26- Days to Ship: 3 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]
· 2-flute end mill coated with WXL hard lubricating film coating.
Proven cutting performance on not only steel but also copper alloys.
Recommended for both wet-type and dry-type milling.Standard Price: SGD 17.26- Days to Ship: 2 Day(s) or more -
Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE
OSG
2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.
Standard Price: SGD 25.93- Days to Ship: 3 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS
OSG
General purpose type 2-flute end mill with FX coating for excellent heat resistance. Can be used for a wide range of machining.
Standard Price: SGD 92.66- Days to Ship: 4 Day(s) or more -
HELICALMILL (with brazed Inserts) 2 Flutes Short for Cast Iron_WK-EDS
OSG
[Notice] Alteration can be specified. Please select from "Standard / alteration classification" of the narrowing conditions.
25° helix angle, for cast ironStandard Price: SGD 214.52- Days to Ship: Quote -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Slim Shank_FX-SS-EDS
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Standard Price: SGD 122.32- Days to Ship: 3 Day(s) or more -
Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3
OSG
Uses high toughness carbide alloy with high Young's modulus.
Standard Price: SGD 60.69- Days to Ship: 3 Day(s) or more -
OSG
The amount of tool protrusion can be set to the minimum in the two-surface clamped HSK holder. Ideal for high-speed mass production of copper electrodes.
Standard Price: SGD 108.85- Days to Ship: 4 Day(s) or more -
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS
OSG
With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.
Standard Price: SGD 65.18- Days to Ship: 3 Day(s) or more -
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Slim Shank_FX-SS-EMS
OSG
Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.
Standard Price: SGD 140.06- Days to Ship: 4 Day(s) or more -
ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Stub (Super Hard)_WX-PHSS
OSG
Next generation high torsion end mill with short blade length, great chip discharge performance, and high blade rigidity. Capable of high-feed processing at large cutting depth thanks to its rigid short blade length.
Standard Price: SGD 83.97- Days to Ship: 3 Day(s) or more -
HELICALMILL (with brazed Inserts) Multiple Flutes Long for Cast Iron_WK-EML
OSG
[Notice] Alteration can be specified. Please select from "Standard / alteration classification" of the narrowing conditions.
25° helix angle, for cast ironStandard Price: SGD 469.39- Days to Ship: Quote -
HLS4000 HM Coated 4-Flute Long Neck Square
UNION TOOL
[Features]
· Unequal division
· θ1 > θ2: Variable split suppresses chatter vibration and tool damage
· θ1 + θ2 = 180°: Easy to measure the outer diameter. 180° counter blade design.
· Circumference back taper: Cutting resistance is reduced by using a back taper, and vertical wall cutting is also stable.
· Adopts the newly developed HARDMAX coating for high-hardness materials that realizes outstanding heat resistance and lubricity
· The 4-flute blade with improved chip discharge performance achieves top-level high feed and machining accuracyStandard Price: SGD 37.10- Days to Ship: 4 Day(s) or more -
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](//sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_b$)
C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]
UNION TOOL
[Features]
· C-CES: 2-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performanceStandard Price: SGD 16.85- Days to Ship: 4 Day(s) or more -
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](//sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_b$)
CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]
UNION TOOL
[Features]
· End Mill Dedicated for Graphite Machining
· Adopts a carbide base material with excellent wear resistance
· The shape helps prevent chippingStandard Price: SGD 125.13- Days to Ship: 4 Day(s) or more -
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](//sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_b$)
CPS 2-Flute Square for Resin Machining [Alteration Supported Product]
UNION TOOL
[Features]
· Medium Blade Length End Mill for Resin Processing
· Unique blade shape
· Blade Length = 3x Outer Diameter (Some 1.5x/2x)
· An excellent machined surface can be obtained, even for long resin protrusion machiningStandard Price: SGD 30.05- Days to Ship: 4 Day(s) or more -
NS TOOL
The blade length is the same as the blade diameter and the torsion angle is 25°. Weak torsion angle minimizes workpiece deflection
Standard Price: SGD 44.00- Days to Ship: 4 Day(s) or more -
NS TOOL
The blade length is 4x the blade diameter and the torsion angle is 40°. Strong torsion angle enables smooth chip discharge
Standard Price: SGD 63.60- Days to Ship: 4 Day(s) or more -
MHDH445 4-Flute Square-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy
Standard Price: SGD 62.66- Days to Ship: 11 Day(s) -
MHRH430 4-Flute Long Neck End Mill for High-Hardness
NS TOOL
Adopts premium Infinity coating to achieve longer life in machining of materials with high hardness. Also enhances machining accuracy.
Standard Price: SGD 49.64- Days to Ship: 8 Day(s) -
MSE430 MUGEN-COATING 4-Flute End Mill
NS TOOL
Adopts a unique Infinity coating for 4-flute end mill. Cuts a wide range of materials from raw materials to high-hardness materials
Standard Price: SGD 29.70- Days to Ship: 4 Day(s) or more -
MX235 MUGEN-COATING 2-Flute LEAD 35 End Mill
NS TOOL
Resolves the problem of a blade length too short at 2x and too long at 4x
Standard Price: SGD 18.31- Days to Ship: 4 Day(s) or more -
MX435 MUGEN-COATING 4-Flute LEAD 35 End Mill
NS TOOL
Resolves the problem of a blade length too short at 2x and too long at 4x
Standard Price: SGD 30.85- Days to Ship: 8 Day(s) or more -
CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead
UNION TOOL
[Features]
· Variable split and unequal lead effectively suppress chatter vibration
· Adopts a high-toughness type resistant to chipping with carbides, then further fine-tunes the special ridge shape to enable ultra-high-performance deep cutting like never before
· Provides excellent finished surfaces in both heavy cutting and finishing
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistanceStandard Price: SGD 46.63- Days to Ship: 4 Day(s) or more -
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](//sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
CZS, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· With the newly developed bottom blade shape, Z cuts can be processed on solid workpieces
· Uses Chip-Resistant, High-Toughness Carbide Material
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistanceStandard Price: SGD 48.10- Days to Ship: 4 Day(s) or more -
Ultra-Fine Machining End Mill Micro Edge NSME230
NS TOOL
Carbide precision specification, blade diameter tolerance ±2 μm, shank tolerance h3 (roundness 0.1 μm)
Standard Price: SGD 107.97- Days to Ship: 11 Day(s) -
TAC2 Long 2-Flute A Cut End Mill G2
ASAHI TOOLS
The long blade enables deep cutting. Adopts a G2 specification tip suitable for cast iron and nonferrous metal machining.
Standard Price: SGD 185.20- Days to Ship: 4 Day(s) or more -
UEM Long Ultra 30 End Mill AH10
ASAHI TOOLS
Adopts an AH10 (K type) tip suitable for cast iron and nonferrous metals. Seamless long blade specifications.
Standard Price: SGD 239.38- Days to Ship: 4 Day(s) or more -
SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
OKAZAKI SEIKO
High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.
Standard Price: SGD 52.00- Days to Ship: 14 Day(s) -
SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated
OKAZAKI SEIKO
Long high helical endmill for aluminum, 3-flute, pure DLC coating
Standard Price: SGD 125.60- Days to Ship: 14 Day(s) -
SED2M Medium Square End Mill, 2-Flute, Non-Coated
OKAZAKI SEIKO
A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
Standard Price: SGD 35.62- Days to Ship: 14 Day(s) -
SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated
OKAZAKI SEIKO
The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.
Standard Price: SGD 71.26- Days to Ship: 14 Day(s) -
Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: SGD 94.69- Days to Ship: 4 Day(s) or more -
Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Standard Price: SGD 71.64- Days to Ship: 8 Day(s) or more -
Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC
KYOWA SEIKO
[Specifications]
· Shape: Square End Mill (carbide)
· Coating: DLC
· Work Materials: Aluminum [◎], Copper [◎]
[Applications] Flat Surfaces / Side Surfaces / Grooves / Plunging (Z feed) / CountersinkingStandard Price: SGD 62.23- Days to Ship: 4 Day(s) or more -
Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF
OSG
[Features]
· Non-uniform split shape of the base blade and unequal lead shape of the outer peripheral blade achieve "quiet but heavy cutting".
· Work material: General steel, tempered steel, stainless steel, cast iron, copper, aluminum, titaniumStandard Price: SGD 148.29- Days to Ship: 3 Day(s) or more -
End Mill For Roughing & Semi-Finishing VFD
SANDVIK
High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura
Standard Price: SGD 732.95- Days to Ship: 10 Day(s) -
General-Purpose CoroMill Plura End Mill For Roughing & Finishing, 1P222-XA (Hardness 48 HRC Max.)
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: SGD 88.34- Days to Ship: 8 Day(s) or more -
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: SGD 83.43- Days to Ship: 10 Day(s) -
WNC Square End Mill 2 Flute WNC72/2
TOYO DRILL
[Features]
· The special-blend ultra-fine particle carbide alloy and unique blade shape provide excellent toughness and wear resistance as well as stable cutting and a long tool life.Standard Price: SGD 81.75- Days to Ship: 4 Day(s) or more -
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
- Volume Discount
- XAL
- General Steel
- 3 Flutes
Standard Price: SGD 26.81- Days to Ship: 4 Day(s) or more -
XAC series carbide square end mill, 2-flute / short model
MISUMI
[Specification]
·Standard TiAlN coating- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Standard Price: SGD 17.62- Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: SGD 83.55- Days to Ship: 4 Day(s) or more
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_b$)
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_b$)
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_b$)
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | UNION TOOL | NS TOOL | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | DIJET | KYOWA SEIKO | OSG | SANDVIK | SANDVIK | SANDVIK | TOYO DRILL | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | XAL Series Carbide Square End Mill 4-Flute / Blade Length 1.5D (Stub) Type | Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short_FX-MG-EDS | HELICALMILL (with brazed Inserts) 2 Flutes Short for Cast Iron_WK-EDS | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Slim Shank_FX-SS-EDS | Micro Grain Carbide Miniature (φ3 shank) End Mills 2 Flutes_MG-EDS-3 | Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Slim Shank_FX-SS-EMS | ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Stub (Super Hard)_WX-PHSS | HELICALMILL (with brazed Inserts) Multiple Flutes Long for Cast Iron_WK-EML | C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product] | CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product] | CPS 2-Flute Square for Resin Machining [Alteration Supported Product] | CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead | SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated | Solid End Mill for Aluminum Machining (Middle Blade) AL-SEEM2 Type | Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type | Endmill with 2 Carbide Flutes for Aluminum Alloys Short Type ALES-2DLC | Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF | General-Purpose CoroMill Plura End Mill For Roughing & Finishing, 1P222-XA (Hardness 48 HRC Max.) | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model | |||||||||||||||||||||
| Days to Ship | 4 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | Quote | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | Quote | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) | 8 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 11 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 14 Day(s) | 14 Day(s) | 14 Day(s) | 14 Day(s) | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 10 Day(s) | 8 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 12 | 0.1 ～ 12 | 0.1 ～ 30 | 0.2 ～ 12 | 0.2 ～ 30 | 14 ～ 40 | 6 ～ 12 | 0.1 ～ 3 | 1 ～ 12 | 3 ～ 20 | 6 ～ 12 | 2.1 ～ 20 | 14 ～ 40 | 1 ～ 6 | 0.2 ～ 12 | 2 ～ 20 | 0.3 ～ 12 | 0.5 ～ 11.9 | 0.5 ～ 11.9 | 1 ～ 4 | 1 ～ 6 | 1 ～ 12 | 0.1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 20 | 0.03 ～ 0.09 | 10 ～ 50 | 13 ～ 50 | 3 ～ 20 | 3 ～ 20 | 1 ～ 12 | 3 ～ 20 | 3 ～ 20 | 3 ～ 22 | 1 ～ 16 | 6 ～ 12H | 16 ～ 25 | 2 ～ 25 | 2 ～ 20 | 0.32 ～ 11.08 | 1 ～ 12 | 1 ～ 20 | 1 ～ 12 | 2 ～ 20 |
| Blade length (ℓ)(mm) | 4.5 ～ 18 | 0.15 ～ 18 | 0.2 ～ 60 | 0.8 ～ 48 | 0.4 ～ 45 | 25 ～ 60 | 15 ～ 30 | 0.2 ～ 8 | 1.5 ～ 18 | 8 ～ 38 | 15 ～ 30 | 3.2 ～ 30 | 40 ～ 100 | 1 ～ 6 | 0.3 ～ 36 | 15 ～ 70 | 0.9 ～ 36 | 0.5 ～ 11.9 | 2 ～ 47.6 | 2 ～ 8 | 0.8 ～ 9 | 2.5 ～ 30 | 0.3 ～ 36 | 3 ～ 36 | 1.5 ～ 18 | 1.5 ～ 40 | 0.045 ～ 0.135 | 30 ～ 150 | 43 ～ 103 | 10 ～ 45 | 10 ～ 45 | 4 ～ 36 | 15 ～ 80 | 16 ～ 60 | 5 ～ 33 | 2 ～ 32 | 13 ～ 26 | 36 ～ 54 | 4.5 ～ 32.5 | 6 ～ 32 | 0.8 ～ 25 | 1.5 ～ 26 | 2.5 ～ 38 | 1.5 ～ 18 | 3.5 ～ 30 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | 2.5 ～ 30 | - | - | - | - | 4 ～ 50 | - | - | - | - | - | - | 4 ～ 50 | - | - | - | 3 ～ 62 | - | - | - | - | - | 15 ～ 80 | - | - | - | - | - | - | 67 ～ 99 | - | - | - | - | - | 14 ～ 68 | 30 ～ 140 |
| Shank diameter (d)(mm) | 6 ～ 12 | 4 ～ 12 | 4 ～ 32 | 4 ～ 12 | 3 ～ 32 | 16 ～ 32 | 5 ～ 11 | 3 | 6 ～ 12 | 6 ～ 20 | 5 ～ 11 | 6 ～ 20 | 16 ～ 32 | 4 ～ 6 | 4 ～ 12 | 3 ～ 20 | 3 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 | 12 ～ 42 | 12 ～ 42 | 6 ～ 20 | 6 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 16 | 6 ～ 12 | 16 ～ 25 | 6 ～ 25 | 6 ～ 20 | 3 ～ 12 | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 20 |
| Number of flutes(sheet) | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 4 ～ 6 | 4 | 2 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 3 | 3 | 2 | 4 | 2 | 3 | 2 | 4 | 4 ～ 5 | 4 | 3 | 2 | 3 | 2 | 3 | 3 |
| Overall Length (L)(mm) | 45 ～ 75 | 45 ～ 75 | 45 ～ 140 | 45 ～ 100 | 40 ～ 125 | 85 ～ 140 | 90 ～ 110 | 40 | 50 ～ 80 | 50 ～ 105 | 90 ～ 110 | 60 ～ 125 | 100 ～ 180 | 50 ～ 110 | 45 ～ 90 | 60 ～ 200 | 45 ～ 100 | 40 ～ 70 | 45 ～ 105 | 60 | 50 ～ 110 | 45 ～ 80 | 45 ～ 80 | 45 ～ 80 | 50 ～ 110 | 50 ～ 125 | 45 | 80 ～ 250 | 125 ～ 225 | 45 ～ 105 | 70 ～ 800 | 45 ～ 75 | 70 ～ 150 | 60 ～ 130 | 70 ～ 200 | 45 ～ 100 | 60 ～ 80 | 115 ～ 156 | 50 ～ 121 | 57 ～ 104 | 40 ～ 75 | 45 ～ 100 | 40 ～ 105 | 60 ～ 100 | 80 ～ 200 |
| work material | Copper[◎] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○/◎] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) / IKOU | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Variable lead | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove / Countersinking | Side / Groove | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove | Plane / Side / Countersinking | Side / Groove | Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane | Plane | Plane | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts |
| Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | TiAlN | Non-Coated | CrN | Non-Coated | TiAlN | TiAlN | Non-Coated | For High Hardness (Silicon Group) | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | DLC | - | TiCN | - | - | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Blade tip shape | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | With Lead | Sharp Edge | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | - | C plane | - | - | - | - | With Lead | Sharp Edge | With Lead | With Lead |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Long-Neck Square | Square | Square | Long-Neck Square | Long-Neck Square | High Helical | High Helical | Square | High Helical | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square |
![C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439238.jpg?$product_view_c$)
![CGE, for Graphite Processing, 4-Flute Square [Alternation Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439496.jpg?$product_view_c$)
![CPS 2-Flute Square for Resin Machining [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000439542.jpg?$product_view_c$)
![CZS, UT Coat, 4-Flute Square [Alteration Supported Product]](http://sg.misumi-ec.com/linked/material/fs/UNO1/PHOTO/223000571987.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.80
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.80
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.80
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.80
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.80
- 47
- 47.2
- 47.5
- 47.6
- 47.80
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60～60.50
- 60
- 60.50
-
62
-
63
-
64
-
65
-
66
-
67
-
70～70.50
- 70
- 70.50
-
72
-
75
-
76
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
[4-75/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- OSG (65)
- NS TOOL (62)
- SANDVIK (35)
- UNION TOOL (22)
- ASAHI TOOLS (17)
- OKAZAKI SEIKO (16)
- NACHI(FUJIKOSHI) (15)
- 7 LEADERS (12)
- DIJET (9)
- EIKOSHA (6)
- TOYO DRILL (5)
- KYOWA SEIKO (3)
- SANKO MFG (2)
- Poulten&Graf (1)
- SUMITOMO ELECTRIC HARDMETAL (1)
- VAN HOORN (1)
- WIDIN (0)
- PROCHI (0)
- KYOCERA (0)
- ATOM (0)
- TAIYO-TOOL (0)
- GCT (0)
- THE CUT (0)
- GUHRING (0)
CAD
-
- 2D
- 3D
Related Categories to Carbide Square End Mills
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?