(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
Days to Ship |
|
---|
Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE
OSG
2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.
Standard Price: | SGD 17.26- |
---|---|
Days to Ship: | 3 Day(s) or more |
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Standard Price: | SGD 23.74- |
---|---|
Days to Ship: | 3 Day(s) or more |
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]
· Shape: Square end mill (carbide)
· Coating: For General Steels (AlCrN, etc.)
· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎]
[Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Standard Price: | SGD 32.59- |
---|---|
Days to Ship: | 4 Day(s) or more |
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Standard Price: | SGD 44.86- |
---|---|
Special Price | |
Days to Ship: | 4 Day(s) or more |
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 4 Day(s) or more |
---|
C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]
UNION TOOL
[Features]
· C-CES: 4-flute sharp corner type
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performance
Standard Price: | SGD 26.09- |
---|---|
Days to Ship: | 4 Day(s) or more |
(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
Standard Price: | SGD 12.14- |
---|---|
Special Price | |
Days to Ship: | Same day or more |
XAL Series Carbide Square End Mill 4-Flute / Blade Length 1.5D (Stub) Type
MISUMI
Also effective for high speed machining
Standard Price: | SGD 15.18- |
---|---|
Days to Ship: | 4 Day(s) or more |
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 4 Day(s) or more |
---|
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
Standard Price: | SGD 27.10- |
---|---|
Special Price | |
Days to Ship: | Same day or more |
(Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
Standard Price: | SGD 13.90- |
---|---|
Days to Ship: | Same day or more |
(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Days to Ship: | Same day or more |
---|
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
Standard Price: | SGD 26.10- |
---|---|
Days to Ship: | 4 Day(s) or more |
(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
Standard Price: | SGD 15.54- |
---|---|
Days to Ship: | 4 Day(s) or more |
(Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
Standard Price: | SGD 13.99- |
---|---|
Days to Ship: | 4 Day(s) or more |
C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)
· Reasonable price, yet high quality and high performance
Standard Price: | SGD 26.09- |
---|---|
Days to Ship: | 4 Day(s) or more |
Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium)
KYOCERA
[Features]
A solid end mill suitable for general steel, high hardness steel, stainless steel, and other workpieces, medium type, 2 flutes.
MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
[Applications]
Suitable for finishing of general steel, stainless steel, aluminum, etc.
Standard Price: | SGD 22.60- |
---|---|
Days to Ship: | 4 Day(s) or more |
CoroMill Plura End Mill R216 (Hardness 48 HRC or less), for Rough Machining and Medium Finishing
SANDVIK
High quality carbide end mill tools for a highly productive, efficient and reliable milling solution
Standard Price: | SGD 156.80- |
---|---|
Days to Ship: | 10 Day(s) |
TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·General-purpose 2-flute end mill for a wide range of applications
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 4 Day(s) or more |
---|
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
Standard Price: | SGD 41.33- |
---|---|
Days to Ship: | 6 Day(s) or more |
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Standard Price: | SGD 32.59- |
---|---|
Days to Ship: | 4 Day(s) or more |
GSX MILL 4-Flute Blade 4D GSX4C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Standard Price: | SGD 45.42- |
---|---|
Days to Ship: | 4 Day(s) or more |
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS
OSG
Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.
Standard Price: | SGD 55.29- |
---|---|
Days to Ship: | 4 Day(s) or more |
UNION TOOL
[Features]
· With a new groove shape, cutting chip discharge properties are improved
· Use of chip-resistant, high-toughness carbide material and a new coating have provided significant improvements in terms of fracture resistance and wear resistance.
Standard Price: | SGD 16.85- |
---|---|
Days to Ship: | 4 Day(s) or more |
End Mill with 2 Carbide Solid Blades KSE-2
KYOWA SEIKO
[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
Standard Price: | SGD 70.78- |
---|---|
Days to Ship: | 4 Day(s) or more |
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
Standard Price: | SGD 12.46- |
---|---|
Days to Ship: | 4 Day(s) or more |
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 4 Day(s) or more |
---|
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.
Days to Ship: | 4 Day(s) or more |
---|
TSC series carbide long neck square end mill, 4-flute / long neck model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Days to Ship: | 4 Day(s) or more |
---|
TSC series carbide roughing end mill, fine pitch / regular model
MISUMI
[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Special Price | |
Days to Ship: | Same day or more |
C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]
UNION TOOL
[Features]
· Ideal for deep grooving thanks to the undercut processing of the main part
Standard Price: | SGD 30.93- |
---|---|
Days to Ship: | 4 Day(s) or more |
Standard Price: | SGD 28.00- |
---|---|
Days to Ship: | 4 Day(s) or more |
CZS, UT Coat, 4-Flute Square [Alteration Supported Product]
UNION TOOL
[Features]
· With the newly developed bottom blade shape, Z cuts can be processed on solid workpieces
· Uses Chip-Resistant, High-Toughness Carbide Material
· Adopts a low friction coating to realize outstanding chip discharge performance and abrasion resistance
Standard Price: | SGD 48.10- |
---|---|
Days to Ship: | 4 Day(s) or more |
ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS
OSG
End mill dedicated for counterboring. Can be used for counterboring processing of hex bolts as well as a tool for pre-drilling processing on angled surface.
Standard Price: | SGD 89.08- |
---|---|
Days to Ship: | 4 Day(s) or more |
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Days to Ship: | 4 Day(s) or more |
---|
Carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish
Days to Ship: | 4 Day(s) or more |
---|
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes
Standard Price: | SGD 74.46- |
---|---|
Days to Ship: | 4 Day(s) or more |
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Standard Price: | SGD 36.97- |
---|---|
Days to Ship: | 4 Day(s) or more |
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Standard Price: | SGD 22.66- |
---|---|
Days to Ship: | 4 Day(s) or more |
GSX MILL 2-Flute Blade 3D GSX2C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Standard Price: | SGD 22.66- |
---|---|
Days to Ship: | 4 Day(s) or more |
GSX MILL Slot 1.5D GSXSLT-1.5D
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Standard Price: | SGD 42.03- |
---|---|
Days to Ship: | 4 Day(s) or more |
GSX MILL 4-Flute Blade 2.5D P Type GSX4P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.
Standard Price: | SGD 32.59- |
---|---|
Days to Ship: | 4 Day(s) or more |
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long_FX-MG-EML
OSG
General purpose type 4-flute long blade end mill with FX coating for excellent heat resistance.
Standard Price: | SGD 110.46- |
---|---|
Days to Ship: | 3 Day(s) or more |
ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS
OSG
A long-neck 4-flute end mill that supports processing in narrow and deep spaces. Bottom blade is of a specification that increases the strength of the corner portions.
Standard Price: | SGD 70.48- |
---|---|
Days to Ship: | 4 Day(s) or more |
MUGEN-COATING 2-Flute End Mill MSE230
NS TOOL
Adopts a unique Infinity coating for 2-flute end mill. Capable of universal cutting from roughing to finishing
Standard Price: | SGD 19.70- |
---|---|
Days to Ship: | 4 Day(s) or more |
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||
Brand | OSG | OSG | NACHI(FUJIKOSHI) | MISUMI | MISUMI | UNION TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | UNION TOOL | KYOCERA | SANDVIK | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | UNION TOOL | KYOWA SEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | UNION TOOL | NS TOOL | UNION TOOL | OSG | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | NS TOOL |
Product Series | Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model | C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product] | (Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | XAL Series Carbide Square End Mill 4-Flute / Blade Length 1.5D (Stub) Type | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model | (Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | (Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | (Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | (Economy series) XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | (Economy series) XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product] | Emphasis On Accuracy / Finished Surface 2-Blades Blade Pin Card 2FESM (Medium) | CoroMill Plura End Mill R216 (Hardness 48 HRC or less), for Rough Machining and Medium Finishing | TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model | TSC series carbide long neck square end mill, 4-flute / long neck model | TSC series carbide roughing end mill, fine pitch / regular model | C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product] | ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS | TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model | Carbide square end mill, 4-flute / 3D Flute Length (regular) model | XAC series carbide roughing end mill, fine pitch / regular model | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Long_FX-MG-EML | ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS | ||||||||||||||
CAD | |||||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 10 Day(s) | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
Blade diameter (D)(φ) | 0.1 ~ 20 | 0.1 ~ 12 | 1 ~ 20 | 1.5 ~ 25 | 2 ~ 20 | 1 ~ 12 | 0.1 ~ 20 | 3 ~ 12 | 1 ~ 20 | 1 ~ 12 | 1 ~ 20 | 1 ~ 20 | 2 ~ 20 | 0.5 ~ 12 | 0.1 ~ 6 | 1 ~ 20 | 0.2 ~ 16 | 2 ~ 20 | 0.1 ~ 20 | 3.15 ~ 19.99 | 1 ~ 20 | 1 ~ 20 | 0.1 ~ 6 | 1 ~ 12 | 3 ~ 6 | 0.1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 6 | 3 ~ 20 | 0.2 ~ 6 | 1 ~ 12 | 1 ~ 20 | 3 ~ 20 | 1 ~ 20 | 2 ~ 20 | 6 ~ 20 | 1 ~ 20 | 0.2 ~ 20 | 1 ~ 20 | 1 ~ 16 | 1 ~ 20 | 3 ~ 30 | 1 ~ 10 | 0.1 ~ 12 |
Blade length (ℓ)(mm) | 0.3 ~ 60 | 0.15 ~ 18 | 2 ~ 40 | 6 ~ 120 | 5 ~ 75 | 2.5 ~ 26 | 0.2 ~ 40 | 4.5 ~ 18 | 3 ~ 38 | 4 ~ 48 | 2 ~ 40 | 3 ~ 60 | 5 ~ 38 | 2 ~ 48 | 0.2 ~ 9 | 2.5 ~ 48 | 0.4 ~ 32 | - | 0.2 ~ 40 | 3.5 ~ 48 | 2.5 ~ 50 | 4 ~ 80 | 0.15 ~ 9 | 1.5 ~ 36 | 10 ~ 15 | 0.3 ~ 60 | 3 ~ 38 | 4 ~ 56 | 1.5 ~ 10 | 15 ~ 45 | 0.3 ~ 9 | 2 ~ 24 | 1.5 ~ 40 | 8 ~ 38 | 4 ~ 56 | 5 ~ 60 | 16 ~ 38 | 2.5 ~ 38 | 0.5 ~ 50 | 3 ~ 60 | 1.5 ~ 24 | 2.5 ~ 50 | 12 ~ 67 | 1.5 ~ 15 | 0.15 ~ 30 |
Underneck length (ℓ1)(mm) | - | 0.3 ~ 60 | - | - | 30 ~ 112 | - | - | - | 18 ~ 73 | - | - | - | - | - | 0.3 ~ 60 | - | - | 9.5 ~ 52 | 17 ~ 73 | - | - | - | 0.3 ~ 60 | - | - | - | 18 ~ 72 | 26 ~ 92 | 4 ~ 50 | 20 ~ 92 | 0.5 ~ 60 | - | - | - | 26 ~ 92 | 23 ~ 92 | - | - | - | - | - | - | - | 4 ~ 80 | - |
Shank diameter (d)(mm) | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 25 | 6 ~ 20 | 4 ~ 12 | 3 ~ 20 | 6 ~ 12 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 12 | 4 ~ 6 | 4 ~ 20 | 4 ~ 16 | 6 ~ 20 | 3 ~ 20 | 6 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 6 | 4 ~ 12 | 6 | 3 ~ 20 | 4 ~ 20 | 6 ~ 20 | 4 ~ 6 | 6 ~ 20 | 4 ~ 6 | 4 ~ 12 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 20 | 6 ~ 20 | 3 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 16 | 4 ~ 20 | 6 ~ 32 | 4 ~ 10 | 4 ~ 12 |
Number of flutes(sheet) | 2 | 2 | 4 | 4 | 3 | 4 | 2 | 4 | 3 | 4 | 4 | 4 | 4 | 2 | 2 | 4 | 2 | 3 ~ 4 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 3 ~ 4 | 2 | 4 | 4 | 2 | 3 | 4 | 3 ~ 4 | 4 | 2 | 2 | 3 | 4 | 4 | 4 | 2 |
Overall Length (L)(mm) | 45 ~ 130 | 45 ~ 140 | 40 ~ 100 | 60 ~ 250 | 60 ~ 150 | 45 ~ 75 | 40 ~ 110 | 45 ~ 75 | 60 ~ 110 | 45 ~ 100 | 40 ~ 110 | 45 ~ 130 | 45 ~ 125 | 45 ~ 100 | 50 ~ 100 | 45 ~ 110 | 45 ~ 90 | 57 ~ 104 | 35 ~ 110 | 40 ~ 105 | 40 ~ 100 | 40 ~ 140 | 45 ~ 120 | 45 ~ 90 | 50 | 40 ~ 110 | 60 ~ 110 | 60 ~ 130 | 40 ~ 100 | 60 ~ 130 | 45 ~ 120 | 45 ~ 80 | 50 ~ 125 | 50 ~ 125 | 60 ~ 130 | 45 ~ 130 | 57 ~ 104 | 38 ~ 100 | 40 ~ 100 | 40 ~ 120 | 40 ~ 90 | 40 ~ 100 | 50 ~ 145 | 45 ~ 150 | 45 ~ 80 |
work material | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[○] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] | general steel[◎] |
Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | - | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | - | For High Hardness (Silicon Group) | TiCN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiCN | For General Steels (AlCrN, etc.) | TiCN | For High Hardness (Silicon Group) | Non-Coated | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiCN | Non-Coated | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiAlN | - | TiAlN | For High Hardness (Silicon Group) | Non-Coated | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | TiAlN | TiAlN | TiAlN |
Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | - | With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge | - | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Micro R | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | C plane | Sharp Edge | With Lead | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead |
Type | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Long-Neck Square | Roughing | Long-Neck Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square |
Loading...
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?