(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Categories

Search by Application

Brands

  • MISUMI TECHNICAL LIBRARY
  • Mold EX Press
  • Need a copy of MISUMI Catalog?
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Quote / Order

Part Number Checker

  • Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

  • How can we improve?

    How can we improve?

    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Privacy Policy

    Thank you for your cooperation.

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Please use the inquiry form.

    Privacy Policy

TSC series carbide long neck radius end mill, 4-flute / long neck model (TSC-CR-PEM4LB1.5-6-R0.3)

TSC series carbide long neck radius end mill, 4-flute / long neck model TSC-CR-PEM4LB1.5-6-R0.3

Click this image to zoom it.

Move the mouse over the image to zoom

  • TSC series carbide long neck radius end mill, 4-flute / long neck model
  • TSC series carbide long neck radius end mill, 4-flute / long neck model
  • Volume Discount

MISUMI

MISUMI

[Features]
·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling
·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes

PDF

Part Number

Configured Part Number is shown.

TSC-CR-PEM4LB1.5-6-R0.3

TSC series carbide long neck radius end mill, 4-flute / long neck model:Related Image

30
45
60
  1. 1
Part Number
TSC-CR-PEM4LB1.5-6-R0.3
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ) 		R Size
(mm) 		Work Material Flute Length (ℓ)
(mm) 		Overall Length (L)
(mm) 		Shank Diameter (d)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications R Precision
(μm) 		Additional Classification #6 Figure Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

SGD 50.68

1 Piece(s)Available 4 Day(s) or more 1.50.3General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]2.35046Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting±0.005Stocked Product-11.456.286.597.328.24

Loading...

  1. 1

Specifications

TSC series carbide long neck radius end mill, 4-flute / long neck model:Related Image

 Model Number
TSC-CR-PEM4LB (Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Radius
R		 Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1
3
0.05 0.1 0.2 0.3
1.5
0.95
50
4
3.14
3.30
3.66
4.12
 1
4
4.19
4.40
4.88
5.49
5
5.24
5.49
6.10
6.87
6
6.28
6.59
7.32
8.24
8
8.38
8.79
9.76
10.98
10
10.47
10.99
12.21
13.73
12
12.57
13.19
14.65
16.48
1.2
5
0.1 0.2 0.3
1.8
1.15
50
4
5.24
5.49
6.10
6.87
 1
10
10.47
10.99
12.21
13.73
15
15.71
16.48
18.31
20.60
1.5
6
0.1 0.5
2.3
1.45
50
4
6.28
6.59
7.32
8.24
 1
12
12.57
13.19
14.65
16.48
16
16.75
17.58
19.53
21.97
6
0.2 0.3
6.28
6.59
7.32
8.24
8
8.38
8.79
9.76
10.98
10
10.47
10.99
12.21
13.73
12
12.57
13.19
14.65
16.48
16
16.75
17.58
19.53
21.97
2
8
0.1 0.3
3
1.95
50
4
8.38
8.79
9.76
10.98
 1
12
12.57
13.19
14.65
16.48
16
16.75
17.58
19.53
Without Interference
20
70
20.94
21.98
24.41
Without Interference
24
25.13
26.38
Without Interference
Without Interference
8
0.2 0.5
3
1.95
50
4
8.38
8.79
9.76
10.98
 1
10
10.47
10.99
12.21
13.73
12
12.57
13.19
14.65
16.48
14
14.66
15.39
17.09
19.22
16
16.75
17.58
19.53
Without Interference
20
70
20.94
21.98
24.41
Without Interference
24
25.13
26.38
Without Interference
Without Interference
2.5
15
0.1 0.2 0.3 0.5
3.7
2.4
50
4
15.71
16.48
18.31
Without Interference
 1
20
70
20.94
21.98
Without Interference
Without Interference
30
31.41
32.97
Without Interference
Without Interference
3
16
0.1 0.2 0.3 0.5 1
4.5
2.9
70
6
16.75
17.58
19.53
21.97
 1
20
20.94
21.98
24.41
27.46
25
26.18
27.47
30.51
Without Interference
30
31.41
32.97
36.62
Without Interference
40
100
41.88
43.96
Without Interference
Without Interference
4
16
0.1 0.2 0.5 1
6
3.8
50
6
16.75
17.58
19.53
Without Interference
 1
20
70
20.94
21.98
24.41
Without Interference
30
31.41
32.97
36.62
Without Interference
40
100
41.88
43.96
Without Interference
Without Interference
5
25
0.1 0.2 0.3 0.5 1
7.5
4.8
70
6
26.18
27.47
Without Interference
Without Interference
 1
35
100
36.65
Without Interference
Without Interference
Without Interference
6
30
0.1 0.2 0.3 0.5 1
9
5.8
70
6
Without Interference
Without Interference
Without Interference
Without Interference
 2
40
100
Without Interference
Without Interference
Without Interference
Without Interference


Model Number
LN-TSC-CR-EM4S (Manufactured Product)

Outer Diameter
D		 Radius
R		 Length Under Neck ℓ1
1 mm Increment Designation		 Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Shank Diameter
d		 Figure
2 0.5 9 ~ 21 4 1.95 40 4 3
3 0.5 11 ~ 21 6 2.9 45 6 3
4 0.5 13 ~ 23 8 3.8 45 6 3
5 0.5 17 ~ 25 12 4.8 45 6 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number.(3) The order for specifying the "length under neck" and "radius" is the opposite from that of stocked products.

For Cutting Conditions, Refer to >>Click here.

More Information


● Radius (R) accuracy is of high quality at ±5 μm (compared to our other products), allowing for high-precision deep groove machining to be achieved.
● It adopts a 4-flute shape to allow higher feed configurations compared to machining with 2-flute models. 


TSC series carbide long neck radius end mill, 4-flute / long neck model:Related Image

Basic Information

Number of Flutes(sheet) 4 Model Long Neck Radius Coating For High Hardness (Silicone-Based)
Torsion Angle (θ) Standard Helix (30 to 40°)

Please check the type/dimensions/specifications of the part TSC-CR-PEM4LB1.5-6-R0.3 in the TSC series carbide long neck radius end mill, 4-flute / long neck model series.

Configure

Clear All

1 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Work Material

    • General Steel
    • Heat-Treated Steel
    • High-Hardness Steel ~ HRC55
    • Stainless Steel
    • Cast Iron
    • Aluminum Alloy
    • Copper Alloy

    Clear

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Curved Surface
    • Groove
    • Inclined Cutting

    Clear

  • #6

     

    Clear

  • type

    • LN-TSC-CR-EM4S
    • TSC-CR-PEM4LB

    Clear

  • Outer Diameter (D)(φ)

    • 1
    • 1.2
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6

    Clear

  • R Size(mm)

    • 0.05
    • 0.1
    • 0.2
    • 0.3
    • 0.5
    • 1

    Clear

  • Flute Length (ℓ)(mm)

    • 1.5
    • 1.8
    • 2.3
    • 3
    • 3.7
    • 4
    • 4.5
    • 6
    • 7.5
    • 8
    • 9
    • 12

    Clear

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 70
    • 100

    Clear

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Clear

  • Length Under Neck (ℓ1)(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 15
    • 16
    • 20
    • 24
    • 25
    • 30
    • 35
    • 40

    Clear

  • R Precision(μm)

    • ±0.005
    • ±0.01

    Clear

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Clear

Days to Ship

    • All
    • 4 Day(s) or Less
    • 6 Day(s) or Less
    • 19 Day(s) or Less
    • 23 Day(s) or Less

    Clear

Specify Alterations

Similar Part Numbers

Part Number
TSC-CR-PEM4LB1-10-R0.3
TSC-CR-PEM4LB1-12-R0.05
TSC-CR-PEM4LB1-12-R0.1
TSC-CR-PEM4LB1.5-6-R0.5
TSC-CR-PEM4LB1.5-8-R0.2
TSC-CR-PEM4LB1.5-8-R0.3
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ) 		R Size
(mm) 		Work Material Flute Length (ℓ)
(mm) 		Overall Length (L)
(mm) 		Shank Diameter (d)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications R Precision
(μm) 		Additional Classification #6 Figure Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm)

SGD 70.32

1 Piece(s)Available 4 Day(s) or more 10.3Copper Alloy[◯] / Aluminum Alloy[◯] / Cast Iron[◯] / Stainless Steel[◯] / Heat-Treated Steel[◎] / General Steel[◎]1.550410Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.9510.4710.9912.2113.73

SGD 66.50

1 Piece(s)Available 4 Day(s) or more 10.05Copper Alloy[◯] / Aluminum Alloy[◯] / Cast Iron[◯] / Stainless Steel[◯] / Heat-Treated Steel[◎] / General Steel[◎]1.550412Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.9512.5713.1914.6516.48

SGD 66.50

1 Piece(s)Available 4 Day(s) or more 10.1Copper Alloy[◯] / Aluminum Alloy[◯] / Cast Iron[◯] / Stainless Steel[◯] / Heat-Treated Steel[◎] / General Steel[◎]1.550412Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-10.9512.5713.1914.6516.48

SGD 59.34

1 Piece(s)Available 4 Day(s) or more 1.50.5Copper Alloy[◯] / Aluminum Alloy[◯] / Cast Iron[◯] / Stainless Steel[◯] / Heat-Treated Steel[◎] / General Steel[◎]2.35046Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-11.456.286.597.328.24

SGD 64.41

1 Piece(s)Available 4 Day(s) or more 1.50.2Copper Alloy[◯] / Aluminum Alloy[◯] / Cast Iron[◯] / Stainless Steel[◯] / Heat-Treated Steel[◎] / General Steel[◎]2.35048Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-11.458.388.799.7610.98

SGD 64.41

1 Piece(s)Available 4 Day(s) or more 1.50.3Copper Alloy[◯] / Aluminum Alloy[◯] / Cast Iron[◯] / Stainless Steel[◯] / Heat-Treated Steel[◎] / General Steel[◎]2.35048Inclined Cutting / Groove / Curved Surface / Side Surface / Flat Surface±0.005Stocked Product-11.458.388.799.7610.98

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(65) 6733 7211 / FAX：(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
Technical Inquiry

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)

  • Tel: (65) 6733 7211
  • Fax: (65) 6733 0211
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.