(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Linear Shafts-Both Ends Tapped

MISUMI

[Features] A shaft with female threads on both ends (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFJW	SFUW	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFJW	SSFUW	-	SUS440C or 13Cr stainless		-
PSFJW	PSFUW	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJW	PSSFUW	-	SUS440C or 13Cr stainless
RSFJW	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGW	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGW	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Full Length Hardness Guaranteed Shafts p1_155
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	M	-	N
SFJW8 SSFJW20	- -	200 500	- -	M4 M6	- -	N4 N10

Part Number			L 1mm Increments	M (Coarse), N (Coarse) Selection													D Tol.			C
Type		D	L 1mm Increments	M (Coarse), N (Coarse) Selection													g6	h5	f8	C
(D Tol. g6) SFJW SSFJW PSFJW PSSFJW (D Tol. f8) PSFGW PSSFGW	(D Tol. h5) SFUW SSFUW PSFUW PSSFUW	4	20~ 300	2													-0.004 -0.012	0 -0.005	-	0.2 or Less
		5	20~ 400		2.6	3											-0.004 -0.012	0 -0.005	-	0.2 or Less
		6	20~ 800			3											-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	20~1000			3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	20~1000			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	20~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	25~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	25~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200				4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200				4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		25	35~1200				4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

Part Number		L 1mm Increments	M (Coarse), N (Coarse) Selection											D Tol.	C
Type	D	L 1mm Increments	M (Coarse), N (Coarse) Selection											g6	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFJW	4	20~300	2											-0.004 -0.012	0.2 or Less
	5	20~400		2.6	3									-0.004 -0.012	0.2 or Less
	6	20~500			3									-0.004 -0.012	0.5 or Less
	8	20~500			3	4	5							-0.005 -0.014	0.5 or Less
	10	20~500			3	4	5	6						-0.005 -0.014	0.5 or Less
	12	20~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	13	25~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	15	25~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	16	30~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	18	30~500				4	5	6	8	10	12			-0.006 -0.017	0.5 or Less
	20	30~500				4	5	6	8	10	12			-0.007 -0.020	1.0 or Less
	25	35~500				4	5	6	8	10	12	16		-0.007 -0.020	1.0 or Less
	30	35~500						6	8	10	12	16	20	-0.007 -0.020	1.0 or Less

[ ! ]L requires Mx2+Nx2≤L. [ ! ]When Mx2.5+4+Nx2.5+4≥L, tap pilot holes may go through and the effective length of the smaller tap part may be shortened.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSSFGW6-[20-600/1]-M3-N3
PSSFGW8-[20-800/1]-M[3,4,5]-N[3,4,5]
PSSFGW10-[20-1200/1]-M[3,4,5,6]-N[3,4,5,6]
PSSFGW12-[20-1000/1]-M[4,5,6,8]-N[4,5,6,8]
PSSFGW12-[20-1000/1]-M[4,5,6,8]-NSC8
PSSFGW12-[20-1000/1]-MSC8-N[4,5,6,8]
PSSFGW12-[20-1000/1]-MSC8-NSC8
PSSFGW13-[25-1000/1]-M[4,5,6,8]-N[4,5,6,8]
PSSFGW13-[25-1000/1]-M[4,5,6,8]-NSC8
PSSFGW13-[25-1000/1]-MSC8-N[4,5,6,8]
PSSFGW13-[25-1000/1]-MSC8-NSC8
PSSFGW15-[25-1000/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
PSSFGW15-[25-1000/1]-M[4,5,6,8,10]-NSC[8,10]
PSSFGW15-[25-1000/1]-MSC[8,10]-N[4,5,6,8,10]
PSSFGW15-[25-1000/1]-MSC[8,10]-NSC[8,10]
PSSFGW16-[30-1200/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
PSSFGW16-[30-1200/1]-M[4,5,6,8,10]-NSC[8,10]
PSSFGW16-[30-1200/1]-MSC[8,10]-N[4,5,6,8,10]
PSSFGW16-[30-1200/1]-MSC[8,10]-NSC[8,10]
PSSFGW18-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSSFGW18-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
PSSFGW18-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12]
PSSFGW18-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
PSSFGW18-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12]
PSSFGW18-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12]
PSSFGW18-[30-1200/1]-MSC[8,10,12]-N[4,5,6,8,10,12]
PSSFGW18-[30-1200/1]-MSC[8,10,12]-ND[6,8,10,12]
PSSFGW18-[30-1200/1]-MSC[8,10,12]-NSC[8,10,12]
PSSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]
PSSFGW20-[30-1200/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]
PSSFGW20-[30-1200/1]-MSC[8,10,12,14]-NSC[8,10,12,14]
PSSFGW25-[35-1200/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSSFGW25-[35-1200/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18]
PSSFGW25-[35-1200/1]-MSC[8,10,12,14,18]-N[4,5,6,8,10,12,16]
PSSFGW25-[35-1200/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]
PSSFGW30-[35-1500/1]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20]
PSSFGW30-[35-1500/1]-M[6,8,10,12,16,20]-NSC[8,10,12,14,18]
PSSFGW30-[35-1500/1]-MSC[8,10,12,14,18]-N[6,8,10,12,16,20]
PSSFGW30-[35-1500/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]
PSSFGW35-[35-1500/1]-M[8,10,12,16,20,24]-N[8,10,12,16,20,24]
PSSFGW35-[35-1500/1]-M[8,10,12,16,20,24]-NSC[8,10,12,14,18]
PSSFGW35-[35-1500/1]-MSC[8,10,12,14,18]-N[8,10,12,16,20,24]
PSSFGW35-[35-1500/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]
PSSFGW40-[50-1500/1]-M[10,12,16,20,24,30]-N[10,12,16,20,24,30]
PSSFGW40-[50-1500/1]-M[10,12,16,20,24,30]-NSC[10,12,14,18]
PSSFGW40-[50-1500/1]-MSC[10,12,14,18]-N[10,12,16,20,24,30]
PSSFGW40-[50-1500/1]-MSC[10,12,14,18]-NSC[10,12,14,18]
PSSFGW50-[65-1500/1]-M[12,16,20,24,30]-N[12,16,20,24,30]
PSSFGW50-[65-1500/1]-M[12,16,20,24,30]-NSC[12,14,18]
PSSFGW50-[65-1500/1]-MSC[12,14,18]-N[12,16,20,24,30]
PSSFGW50-[65-1500/1]-MSC[12,14,18]-NSC[12,14,18]
PSSFJW4-[20-300/1]-M2-N2
PSSFJW5-[20-400/1]-M[2.6,3]-N[2.6,3]
PSSFJW6-[20-600/1]-M3-N3
PSSFJW8-[20-800/1]-M[3,4,5]-N[3,4,5]
PSSFJW10-[20-800/1]-M[3,4,5,6]-N[3,4,5,6]
PSSFJW10-[20-800/1]-M[3,4,5,6]-ND6
PSSFJW10-[20-800/1]-MD6-N[3,4,5,6]
PSSFJW10-[20-800/1]-MD6-ND6

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Tapped Thread M to Fine One [MSC] (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	6	20 ～ 600	f8	No Induction Hardening	-	-	3	3	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	8	20 ～ 800	f8	No Induction Hardening	-	-	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	10	20 ～ 1200	f8	No Induction Hardening	-	-	3 ～ 6	3 ～ 6	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	8	4 ～ 8	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	8	-	-	4 ～ 8	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	8	8	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	8	4 ～ 8	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	8	-	-	4 ～ 8	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	8	8	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	8 ～ 10	4 ～ 10	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	8 ～ 10	-	-	4 ～ 10	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	8 ～ 10	8 ～ 10	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 10	4 ～ 10	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	8 ～ 10	-	-	4 ～ 10	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	8 ～ 10	8 ～ 10	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 12	4 ～ 12	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	-	-	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	-	-	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 12	-	-	6 ～ 12	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	8 ～ 12	-	-	4 ～ 12	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	8 ～ 12	-	-	-	-	6 ～ 12
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	18	30 ～ 1200	f8	No Induction Hardening	8 ～ 12	8 ～ 12	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 14	4 ～ 12	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	8 ～ 14	-	-	4 ～ 12	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	8 ～ 14	8 ～ 14	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 16	4 ～ 16	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	-	8 ～ 18	4 ～ 16	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	8 ～ 18	-	-	4 ～ 16	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	8 ～ 18	8 ～ 18	-	-	-	-
-	1 Piece(s)	9 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	-	-	6 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	-	8 ～ 18	6 ～ 20	-	-	-
-	1 Piece(s)	9 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	-	-	6 ～ 20	-	-
-	1 Piece(s)	9 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	8 ～ 18	-	-	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	35	35 ～ 1500	f8	No Induction Hardening	-	-	8 ～ 24	8 ～ 24	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	35	35 ～ 1500	f8	No Induction Hardening	-	8 ～ 18	8 ～ 24	-	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	35	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	-	-	8 ～ 24	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	35	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	8 ～ 18	-	-	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	40	50 ～ 1500	f8	No Induction Hardening	-	-	10 ～ 30	10 ～ 30	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	40	50 ～ 1500	f8	No Induction Hardening	-	10 ～ 18	10 ～ 30	-	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	40	50 ～ 1500	f8	No Induction Hardening	10 ～ 18	-	-	10 ～ 30	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	40	50 ～ 1500	f8	No Induction Hardening	10 ～ 18	10 ～ 18	-	-	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	50	65 ～ 1500	f8	No Induction Hardening	-	-	12 ～ 30	12 ～ 30	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	50	65 ～ 1500	f8	No Induction Hardening	-	12 ～ 18	12 ～ 30	-	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	50	65 ～ 1500	f8	No Induction Hardening	12 ～ 18	-	-	12 ～ 30	-	-
-	1 Piece(s)	5 Day(s) or more	10	[Stainless Steel] SUS304	Not Provided	Hard Chrome Plating	50	65 ～ 1500	f8	No Induction Hardening	12 ～ 18	12 ～ 18	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	4	20 ～ 300	g6	Induction Hardened (56HRC~)	-	-	2	2	-	-
-	1 Piece(s)	5 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	5	20 ～ 400	g6	Induction Hardened (56HRC~)	-	-	2.6 ～ 3	2.6 ～ 3	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	6	20 ～ 600	g6	Induction Hardened (56HRC~)	-	-	3	3	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	20 ～ 800	g6	Induction Hardened (56HRC~)	-	-	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	20 ～ 800	g6	Induction Hardened (56HRC~)	-	-	3 ～ 6	3 ～ 6	-	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	20 ～ 800	g6	Induction Hardened (56HRC~)	-	-	3 ～ 6	-	-	6
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	20 ～ 800	g6	Induction Hardened (56HRC~)	-	-	-	3 ～ 6	6	-
-	1 Piece(s)	3 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	20 ～ 800	g6	Induction Hardened (56HRC~)	-	-	-	-	6	6

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

408 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[15-1500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Tapped Thread M to Fine One [MSC](mm)
8

10

12

14

18
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
type
- PSFGW
- PSFJW
- PSFUW
- PSSFGW
- PSSFJW
- PSSFUW
- RSFJW
- SFJW
- SFUW
- SSFJW
- SSFUW
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less

5 Day(s) or Less

9 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Linear Shafts-Both Ends Tapped

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Change Tapped Thread M to Fine One [MSC](mm)

Change Tapped Thread N to Fine One [NSC](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

type

Material

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)