Linear Shafts

Basic Shape

Brand
Product Series
CAD
Days to Ship
Basic Shape
End Shape (Left)
End Shape (Right)
Clamping Tool Type
Shaft End Perpendicularity
Material
Heat Treatment
Surface Treatment
Shaft Dia. D(Ø)
Shaft Fits

    Linear Shafts-Straight Type One End Threaded with Undercut

      Linear Shafts-Both Ends Tapped

        Linear Shafts - Shaft Ends Configurable

          Linear Shafts-One End Tapped

            Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

              Straight-type S series linear shaft

                Shafts - Hollow Shafts

                  Linear Shafts -Straight Type-

                    Linear Shafts - With Retaining Ring Grooves -

                      Linear Shafts-Both Ends Threaded

                        High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats

                          Linear Shafts-Both Ends Stepped and Female Thread-

                            Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

                              Linear Shafts-Both Ends Threaded

                                Linear Shafts-One End Threaded One End Tapped

                                  Linear Shafts-One End Threaded

                                    Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

                                      Linear Shafts - Set Screw Grooved

                                        Oil-less Guide Shaft (BGS)

                                          Straight-type SS series linear shaft

                                            Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole

                                              Linear Shafts-One End Stepped, Both Ends Female Thread-

                                                High Precision Linear Shafts-One End Tapped / One End Tapped with Wrench Flats

                                                  Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                    Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

                                                      Standard LM Shaft

                                                        Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                          Linear Shafts - Keyway

                                                            Linear Shafts -Both Ends Female Thread-

                                                              Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded

                                                                Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

                                                                  Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

                                                                    Linear Shafts-One End Stepped and Female Thread-

                                                                      Shafts - Hollow /One End Tapped Hollow with Wrench Flat

                                                                        SUS304 Precision Shaft (Long Size) SRU

                                                                          Linear Shafts One End Threaded with Undercut

                                                                            Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short

                                                                              Linear Shafts -One End Female Thread-

                                                                                Linear Shafts -Both Ends Female Thread with Wrench Flats-

                                                                                  High Precision Linear Shafts - Both Ends Stepped and Tapped / Both Ends Stepped and Tapped with Wrench Flats

                                                                                    Linear Shafts - One End Stepped Hollow

                                                                                      Precision Linear Shafts - Fully Plated Straight Type

                                                                                        Linear Shafts - Continuous Support - Pre-Drilled and Tapped

                                                                                          High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

                                                                                            Linear Shafts - One End Stepped / One End Tapped Hollow

                                                                                            Brand

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            OZAK

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            OILES

                                                                                            OZAK

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            THK

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            HIROSUGI-KEIKI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MiSUMi C-VALUE

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            Product Series

                                                                                            Linear Shafts-Straight Type One End Threaded with Undercut

                                                                                            Linear Shafts-Both Ends Tapped

                                                                                            Linear Shafts - Shaft Ends Configurable

                                                                                            Linear Shafts-One End Tapped

                                                                                            Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

                                                                                            Straight-type S series linear shaft

                                                                                            Shafts - Hollow Shafts

                                                                                            Linear Shafts -Straight Type-

                                                                                            Linear Shafts - With Retaining Ring Grooves -

                                                                                            Linear Shafts-Both Ends Threaded

                                                                                            High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats

                                                                                            Linear Shafts-Both Ends Stepped and Female Thread-

                                                                                            Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

                                                                                            Linear Shafts-Both Ends Threaded

                                                                                            Linear Shafts-One End Threaded One End Tapped

                                                                                            Linear Shafts-One End Threaded

                                                                                            Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

                                                                                            Linear Shafts - Set Screw Grooved

                                                                                            Oil-less Guide Shaft (BGS)

                                                                                            Straight-type SS series linear shaft

                                                                                            Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole

                                                                                            Linear Shafts-One End Stepped, Both Ends Female Thread-

                                                                                            High Precision Linear Shafts-One End Tapped / One End Tapped with Wrench Flats

                                                                                            Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                                            Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

                                                                                            Standard LM Shaft

                                                                                            Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-

                                                                                            Linear Shafts - Keyway

                                                                                            Linear Shafts -Both Ends Female Thread-

                                                                                            Shafts - One End Tapered, One End Tapped / One End Stepped and Tapped / One End Threaded

                                                                                            Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

                                                                                            Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole

                                                                                            Linear Shafts-One End Stepped and Female Thread-

                                                                                            Shafts - Hollow /One End Tapped Hollow with Wrench Flat

                                                                                            SUS304 Precision Shaft (Long Size) SRU【50 Pieces Per Package】

                                                                                            Linear Shafts One End Threaded with Undercut

                                                                                            Full Length Hardness Guaranteed Shafts - One End / Both Ends Tapped, Short

                                                                                            Linear Shafts -One End Female Thread-

                                                                                            Linear Shafts -Both Ends Female Thread with Wrench Flats-

                                                                                            High Precision Linear Shafts - Both Ends Stepped and Tapped / Both Ends Stepped and Tapped with Wrench Flats

                                                                                            Linear Shafts - One End Stepped Hollow

                                                                                            Precision Linear Shafts - Fully Plated Straight Type

                                                                                            Linear Shafts - Continuous Support - Pre-Drilled and Tapped

                                                                                            High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

                                                                                            Linear Shafts - One End Stepped / One End Tapped Hollow

                                                                                            CAD
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            Days to Ship 3 Day(s) or more 3 Day(s) or more 7 Day(s) or more 3 Day(s) or more 3 Day(s) or more Quote 4 Day(s) or more 5 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 4 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more Quote Quote 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 3 Day(s) or more 7 Day(s) or more Quote 3 Day(s) or more 3 Day(s) or more 5 Day(s) 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 3 Day(s) or more 4 Day(s) or more 9 Day(s) or more 3 Day(s) or more 3 Day(s) or more 5 Day(s) or more 5 Day(s) or more 7 Day(s) or more 4 Day(s) or more 5 Day(s) or more 5 Day(s) or more 7 Day(s) or more 4 Day(s) or more
                                                                                            Basic ShapeSolidSolidSolid / One End Stepped / Both Ends SteppedSolidSolidSolidHollowSolidSolidSolidSolidBoth Ends SteppedHollowSolidSolidSolidOne End Stepped / Both Ends SteppedSolidSolidSolidSolidOne End SteppedSolidSolidHollow / Hollow, One End Stepped / Hollow, Both Ends SteppedSolidSolidSolidSolidSolid / One End SteppedOne End SteppedSolidOne End SteppedHollowSolidSolid / One End SteppedSolidSolidSolidBoth Ends SteppedHollow, One End SteppedSolidSolidOne End Stepped / Both Ends SteppedHollow, One End Stepped
                                                                                            End Shape (Left)No MachiningTappedNo Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped / Hex Socket / TaperedTappedTapped-No MachiningNo MachiningWith Retaining Ring GroovesThreadedTappedNo Machining / TappedTappedThreadedThreadedThreadedThreadedNo Machining / Tapped / Threaded / Set Screw GroovedNo Machining-TappedNo Machining / TappedTappedThreadedNo Machining / Tapped / Threaded / With Retaining Ring GroovesNo MachiningThreadedKeywayTappedTaperedTappedThreadedNo Machining / TappedTappedNo MachiningThreadedTappedTappedTappedTappedNo MachiningNo Machining / Tapped / ThreadedNo MachiningThreadedNo Machining
                                                                                            End Shape (Right)No MachiningTappedNo Machining / Tapped / Threaded / With Retaining Ring Grooves / Tapped Hole / Hex Socket / TaperedNo MachiningTapped-No MachiningNo MachiningWith Retaining Ring GroovesTappedTappedNo Machining / TappedTappedThreadedTappedNo MachiningNo Machining / ThreadedSet Screw GroovedNo Machining-No MachiningTappedNo MachiningThreadedNo Machining / Tapped / Threaded / With Retaining Ring GroovesNo MachiningNo MachiningNo MachiningTappedTapped / ThreadedTappedNo MachiningNo MachiningNo MachiningNo MachiningNo MachiningNo Machining / TappedNo MachiningTappedTappedNo MachiningNo Machining / Tapped / Threaded / TaperedNo MachiningNo Machining / Tapped / ThreadedTapped
                                                                                            Clamping Tool Type----------------------------------Not Provided----------
                                                                                            Shaft End PerpendicularityPerpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)--Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.2)-Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)--Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)Perpendicularity (0.2)--Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)--Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)-Perpendicularity (0.2)Perpendicularity (0.2)Perpendicularity (0.03)-
                                                                                            MaterialSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteelSteel / Stainless SteelSteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteelStainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelSteel / Stainless SteelStainless SteelSteel / Stainless SteelSteel / Stainless SteelSteelSteelSteel / Stainless SteelSteelSteelSteel / Stainless SteelSteel / Stainless SteelSteel
                                                                                            Heat TreatmentNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot ProvidedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction HardenedInduction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedNot Provided / Induction HardenedInduction Hardened-Not Provided / Induction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedInduction HardenedInduction Hardened
                                                                                            Surface TreatmentNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot ProvidedNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingHard Chrome PlatingNot ProvidedNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot ProvidedNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot ProvidedNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome PlatingElectroless Nickel PlatingNot Provided / Hard Chrome PlatingNot Provided / Low Temperature Black Chrome PlatingNot Provided / Hard Chrome Plating / Low Temperature Black Chrome Plating
                                                                                            Shaft Dia. D(Ø)3 ~ 504 ~ 506 ~ 504 ~ 506 ~ 503 ~ 606 ~ 506 ~ 303 ~ 306 ~ 504 ~ 308 ~ 506 ~ 504 ~ 504 ~ 504 ~ 508 ~ 506 ~ 308 ~ 503 ~ 606 ~ 508 ~ 504 ~ 303 ~ 306 ~ 503 ~ 1003 ~ 306 ~ 506 ~ 306 ~ 208 ~ 506 ~ 508 ~ 506 ~ 501.2 ~ 68 ~ 506 ~ 206 ~ 306 ~ 308 ~ 306 ~ 508 ~ 5010 ~ 504 ~ 306 ~ 50
                                                                                            Shaft Fitsh5 ~ f8h5 ~ f8h5 ~ g6h5 ~ f8h5 ~ f8g6g6h8h5 ~ f8h5 ~ f8g6h5 ~ f8g6h5 ~ f8h5 ~ f8h5 ~ f8h5 ~ f8g6f8g6h5 ~ f8h5 ~ f8g6h5 ~ f8g6h5 ~ h7h5 ~ f8h5 ~ f8h8h5 ~ g6h5 ~ f8h5 ~ f8h5 ~ f8g6h5h5 ~ f8g6h8h8g6g6g6g6g6g6

                                                                                            Loading...

                                                                                            Related Categories to Linear Shafts