Rod End Bearings, Spherical Bearings

• • Recommendation

  

  MiSUMi Economy

  Rod End Bearings Lubrication Free, Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1.34-
  Days to Ship:	Same day or more

• • Recommendation

  

  MiSUMi Economy

  Rod End Bearings Lubrication Free, Male Threaded

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1.34-
  Days to Ship:	Same day or more

• 

  Rod End (Piston Rod End Bracket)

  SMC

  [Features]
  ・ The product offers smooth rotation and the automatic alignment feature.
  ・ It can be used as an auxiliary bracket for the swing mechanism.
  ・ It is possible to reduce the design labor hours and assembly labor hours of the swing mechanism.
  ・ It can be used for other purposes than connecting to a cylinder.

  Standard Price:	SGD 9.92-
  Days to Ship:	46 Day(s)

• 

  MiSUMi Economy

  Rod End Bearings Tapped

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1.80-
  Days to Ship:	Same day or more

• 

  Rod End, Female Thread Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.73-
  Days to Ship:	Same day or more

• 

  Spherical Slide Bearing

  IKO

  [Features]
  · Contains an oil groove and two oil holes on both the inner and outer rings.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 13.59-
  Days to Ship:	4 Day(s) or more

• 

  Pillow Ball

  IKO

  [Features]
  · Contains an oil groove and one oil hole on the outer ring.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 13.59-
  Days to Ship:	Same day or more

• 

  Rod End Male Threaded Type (Lubrication-free) NOS-T

  THK

  This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.90-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearings - Standard L Short Type

  MISUMI

  [Main Body Material]S35C; Connection thread shape: You can choose male or female threads.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 11.62-
  Days to Ship:	Same day or more

• 

  Rod End Bearings - Threaded / Tapped

  MISUMI

  We offer general-purpose steel and oil-free type rod end bearings.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.97-
  Days to Ship:	Same day or more

• 

  Rod End Male Threaded POS Type

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.90-
  Days to Ship:	Same day or more

• 

  Rod End Bearing, Standard Type, Model PB

  THK

  A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.27-
  Days to Ship:	4 Day(s) or more

• 

  Universal (Rod End Fitting) Ball Joint

  AIRTAC

  Universal (metal rod end fitting) ball joint manufactured by AirTAC, a company highly rated for its low prices and high quality.· Lubricated type universal ball joint

  CAD ：

  2D / 3D

  Standard Price:	SGD 4.71-
  Days to Ship:	4 Day(s) or more

• 

  Male Thread Type Rod End POS Series

  OZAK

  [Features]
  ・ By inserting a special steel alloy into a structural carbon steel holder or outer ring with a high-accuracy bearing steel ball as the inner ring, you can obtain smooth and abrasion-resistant, self-centering, rotation, and oscillating motion

  Standard Price:	SGD 15.54-
  Days to Ship:	4 Day(s) or more

• 

  Spherical Bearing - Standard Type

  MISUMI

  [Material]Holder: S35C, spherical inner ring: SUJ2 (58HRC or more), Boots: special copper alloy with surface treatment options: Spherical inner ring: rigid chrome plating

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.00-
  Days to Ship:	Same day or more

• 

  Rod End, Female Thread Type (Lubrication-Free) NHS-T Type

  THK

  An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
  The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
  
  [Features]
  · NHS-T Type (oil free type)

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.92-
  Days to Ship:	4 Day(s) or more

• 

  Rod End, Female Thread Type PHS Series

  OZAK

  [Features]
  ・ By inserting a special steel alloy into a structural carbon steel holder or outer ring with a high-accuracy bearing steel ball as the inner ring, you can obtain smooth and abrasion-resistant, self-centering, rotation, and oscillating motion

  Standard Price:	SGD 16.58-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearings - Link Ball Straight Type

  MISUMI

  [Material]Holder: high-strength zinc alloy, shank with ball: S35C (20 to 28HRC), Boots: NBR type special synthetic rubber "Hardness" Spherical part: 650HV or more

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 11.29-
  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Rod End Bearings Male Threaded

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1.80-
  Days to Ship:	Same day or more

• 

  Spherical Bearing SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.07-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearings - Link Ball L Type

  MISUMI

  [Material]Holder: high-strength zinc alloy, shank with ball: S35C (20 to 28HRC), Boots: NBR type special synthetic rubber "Hardness" Spherical part: 650HV or more

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.09-
  Days to Ship:	Same day or more

• 

  Link Ball, Male Threaded Holder, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  CAD ：

  2D / 3D

  Standard Price:	SGD 7.30-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearing, Standard Type, Lubrication-Free Type, Male Thread (fluoropolymer PTFE) [NTLOS]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.12-
  Days to Ship:	8 Day(s) or more

• 

  Pillow Ball, Insert Type PBI Series

  OZAK

  [Features]
  ・ By inserting a special steel alloy into a structural carbon steel holder or outer ring with a high-accuracy bearing steel ball as the inner ring, you can obtain smooth and abrasion-resistant, self-centering, rotation, and oscillating motion

  Standard Price:	SGD 15.75-
  Days to Ship:	9 Day(s) or more

• 

  TRUSCO rod end oil free male screw【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 20.40-
  Days to Ship:	4 Day(s) or more

• 

  Lubricated Type Spherical Plain Bearing

  CCVI

  ● This self-aligning type bearing has inner and outer rings with spherical sliding surfaces, so it can bear a large radial load and bi-directional axial load at the same time.
  ● The surfaces of the inner and outer rings are phosphate-treated and its sliding surfaces are coated with MoS2, making it ideal for low torque applications. This bearing offers excellent abrasion resistance and is mostly used in industrial machinery and construction machinery.
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  Standard Price:	SGD 12.98-
  Days to Ship:	4 Day(s) or more

• 

  Spherical Bearing Holder Sets - Standard Type

  MISUMI

  [Type]Spherical bearing "Type of spherical bearing" Flange type 4 circles "Main body material" S35C "Ball material" SUJ2 "Bushing material" Special copper alloy

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 79.01-
  Days to Ship:	Same day or more

• 

  Link Ball, Female Thread Holder, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.62-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearing, Right-Hand Male Thread, fluoropolymer Type 3 Piece HRT-E

  MINEBEA

  Comprised of a spherical bearing placed into the rod end body. The body material is mainly chrome molybdenum steel, etc., and the hardness is HRC35 and the tensile strength is 980 N/mm2 or more. Spherical lathe materials can be selected according to the application, so the 3-piece rod end is widely used in places where better performance is demanding.

  CAD ：

  2D

  Standard Price:	SGD 54.04-
  Days to Ship:	7 Day(s) or more

• 

  Spherical Surface Bearing SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  CAD ：

  2D / 3D

  Standard Price:	SGD 26.56
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearing, Standard Oil Free Type, Female (fluoropolymer PTFE) - [NTLHS]

  STRUENING

  A standard oil free female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.31-
  Days to Ship:	8 Day(s) or more

• 

  Rod End Bearing, Link Bowl L Type [RTLBL]

  STRUENING

  A link ball L type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.01-
  Days to Ship:	8 Day(s)

• 

  Lubricated Type Spherical Plain Bearing with Seal

  CCVI

  ● The GE type with seal is effective in stopping grease leakage and blocking out dust.
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  Standard Price:	SGD 19.68-
  Days to Ship:	7 Day(s) or more

• 

  Rod End Bearing - Standard Type, Male (Alloy Copper) - [PTLOS]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.06-
  Days to Ship:	8 Day(s) or more

• 

  Spherical Bearing - (Alloy Copper Gasket) - [PTLB]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 7.44-
  Days to Ship:	8 Day(s)

• 

  TRUSCO rod end oil free female screw【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 20.40-
  Days to Ship:	4 Day(s) or more

• 

  TRUSCO rod end lubricating male screw【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 18.92-
  Days to Ship:	4 Day(s) or more

• 

  TRUSCO Rod End Lubricated Type Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 18.92-
  Days to Ship:	4 Day(s) or more

• 

  Lubricated Type Spherical Plain Bearing, Inner Ring Wide Type

  CCVI

  ● The features are identical to the GE type, but it is bigger than the GE type and has a larger load capacity
  ● Used widely in Japan
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  Standard Price:	SGD 17.79-
  Days to Ship:	4 Day(s) or more

• 

  Drive machine cylinder load end CRE series

  KOGANEI

  11 types are available by thread size. Compatible with ø6 to 100 air cylinders.
  
  [Features]
  · Backs up cylinder function with smooth link motion.
  · 11 types are available by thread size.
  · Compatible with ø6 to 100 air cylinders.
  · This model uses a fluororesin liner, making it oil free and maintenance-free.

  CAD ：

  2D / 3D

  Standard Price:	SGD 11.03-
  Days to Ship:	4 Day(s) or more

• 

  #500SP1 SL1 Oiles Bushing, Spherical Bearing (SPS)

  OILES

  Can be used without lubrication and has an extremely long service life.

  CAD ：

  2D

  Standard Price:	SGD 104.79-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearing, Left Male Screw, fluoropolymer Type, Two Pieces RBTL-E

  MINEBEA

  Comprised of a ball and body. The body is formed (or swaged) around the ball. The body material is made from cold-formed 303 stainless steel. This bearing has a lower load bearing capacity than the 3 piece and 4 piece rod end bearings. Its low production cost and simple construction make it suitable to applications for general industrial machinery. The rod end requires no lubrication, and is made of stainless steel (303 for the body, 440C for the ball), giving it excellent anti-corrosion characteristics so it can be used in a wide range of general purpose applications.

  CAD ：

  2D

  Standard Price:	SGD 32.07
  Days to Ship:	11 Day(s) or more

• 

  Rod End Joint (REJ)

  IMAO CORPORATION

  [Features]
  · Made of plastic so it is lightweight, making it ideal for high speed applications.
  · The ball is made from self-lubricating material.
  · It does not require maintenance.
  · Its high corrosion resistance enables it to be used in liquid.
  · It is quiet and reduces vibration.

  Standard Price:	SGD 12.47-
  Days to Ship:	Same day or more

• 

  Rod end bearings right male screw metal type 4 piece PR-E

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  CAD ：

  2D

  Standard Price:	SGD 39.40
  Days to Ship:	5 Day(s) or more

• 

  Rod End BearingRight Female Screwfluoropolymer TypeThree Pieces HRT

  MINEBEA

  Comprised of a spherical bearing placed into the rod end body. The body material is mainly chrome molybdenum steel, etc., and the hardness is HRC35 and the tensile strength is 980 N/mm2 or more. Spherical lathe materials can be selected according to the application, so the 3-piece rod end is widely used in places where better performance is demanding.

  CAD ：

  2D

  Standard Price:	SGD 54.04
  Days to Ship:	4 Day(s) or more

Loading...