(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Free Guide Arms, Magnet Bases
| Days to Ship |
|
|---|
-
KANETEC
Widely used as a magnetic holder to fix various measuring devices such as dial gauges on industrial machines and iron surface plates. Plenty of models with a variety of added features.
[Features]
· There are a plenty of small to large size models with a variety of added features so that it can be selected to suit various conditions in the measurement location.
· Stable and highly accurate measurement work can be carried out with the help of the strong magnet and sturdy clamp mechanism.
· Widely used as measuring device holder for measurement of the dimensions of mechanically processed workpieces on industrial machines or on iron surface plates, mainly through comparative measurement, using dial gauge based measuring devices (for test measurement, and detection of variations)- CAD ：
- 2D
Standard Price: SGD 64.81- Days to Ship: Same day or more -
MISUMI
The arm can be adjusted freely with light force. Both ends are male threaded and can be attached to various parts.
- Volume Discount
Standard Price: SGD 37.00- Days to Ship: 4 Day(s) or more -
ME Type Electric Work Lamp with Magnet
KANETEC
Work lamp with base magnet that can be turned ON/OFF. The flexible tube allows the lighting angle to be freely set. Suitable for area lighting on a work bench or on an industrial machine.
[Features]
· The direction of the light can be freely adjusted as desired without shifting the lamp from its fixed spot.
· The safety guard prevents the bulb from breaking in case of a fall.
· Since it is provided with an oil resistant power cord, it can be widely used on the shop floor.
· The magnet of the electric work lamp with magnet can be turned ON/OFF with a single touch, making it a lamp which can be freely mounted, removed, and shifted to any place.
· Suitable for area lighting for processing work on a work bench or industrial machine.- CAD ：
- 2D
Standard Price: SGD 312.54 Days to Ship: 7 Day(s) or more -
Free Angle Arms - Screw Fastened, Wing Screw Fastened
MISUMI
The angle of each joint can be freely adjusted, and the number of units can be selected as needed.
Days to Ship: 7 Day(s) or more -
Standard Price: SGD 148.80 Days to Ship: Same day -
Inspection Stand - Machinery Mini-Type
ECE
The body is smaller than existing products for space saving
Standard Price: SGD 121.02- Days to Ship: 7 Day(s) or more -
Free Guide Arm Sets - Fixed Arm
MISUMI
Three movable parts can be adjusted freely, and all movable parts can be fixed by fixing one dial.
- Volume Discount
Standard Price: SGD 242.92- Days to Ship: 7 Day(s) or more -
KANETEC
· Like the magnetic base, can be used as a measuring device holder, and is also used to hold sensors in fixed place.
[Features]
· Various positional adjustments can be made by tightening a single dial, and they can all be locked at once.
· The clamp system can be adjusted steplessly. It just needs to be turned lightly.
· Available in various sizes from small to large to suit every application.
· The dial gauge mounting can be finely adjusted.
· The angle and direction of the arm can be adjusted freely, without shaking.Standard Price: SGD 398.03 Days to Ship: 7 Day(s) -
MISUMI
Suitable for mounting shafts for measuring instruments. Available at low cost.
- Volume Discount
Standard Price: SGD 22.91- Days to Ship: Same day or more -
MISUMI
Three movable parts can be adjusted freely, and all movable parts can be fixed by fixing one dial.
- Volume Discount
Standard Price: SGD 149.93- Days to Ship: Same day or more -
Arm Kit B Type (Horizontal Mounting)
MIYOSHI PIJON
Light and non-rusting pipe joint, and arm kit for mounting optical devices. Can be used for simple mounting and alignment.
Standard Price: SGD 51.15- Days to Ship: 10 Day(s) or more -
Arm Kit D Type (Mounted Horizontally)
MIYOSHI PIJON
Light and non-rusting pipe joint, and arm kit for mounting optical devices. The angle can be freely adjusted by combining #200 and #204.
Standard Price: SGD 62.17- Days to Ship: 10 Day(s) or more -
Standard Price: SGD 411.77- Days to Ship: 7 Day(s) or more -
Standard Price: SGD 66.21 Days to Ship: 7 Day(s) or more -
KANETEC
2-Point Simultaneous Measurement Model
Mechanical locking type high-lock base.
[Features]
· Tightening the single dial into a variety of positions can lock everything all at once.
· The dial gauge installation part can be finely adjusted.
· The arm angle and direction can be freely adjusted to prevent runout.
[Applications]
· Used widely as a tool for holding measurement instruments when measuring (detecting variations in) the dimensions of machine processed workpieces on a machine tool or iron surface plate using a dial gauge type measurement device as the main method for comparative measurements.Standard Price: SGD 499.24 Days to Ship: 10 Day(s) or more -
Shaft Mounts - Built-in Spring
MISUMI
Suitable for mounting shafts for measuring instruments. It has a built-in spring and can be fixed smoothly.
- Volume Discount
Standard Price: SGD 134.77- Days to Ship: 4 Day(s) or more -
MISUMI
By using neodymium magnets, it achieves a large adsorption force despite its compact size.
- Volume Discount
Standard Price: SGD 34.87- Days to Ship: Same day -
MISUMI
Indicator mounting bracket. The angle of the tip can be adjusted by turning the knurling.
- Volume Discount
Standard Price: SGD 80.86 Days to Ship: Same day -
MISUMI
It can be used as a base part of a free angle arm. [Material] SUS304
- Volume Discount
Standard Price: SGD 12.13- Days to Ship: 5 Day(s) or more -
MISUMI
It can be attached to a free angle arm holder part and does not rotate.
- Volume Discount
Standard Price: SGD 14.49- Days to Ship: 6 Day(s) or more -
MIYOSHI PIJON
Light and non-rusting pipe joint, and arm kit for mounting optical devices. Can be used for simple mounting and alignment.
Standard Price: SGD 47.71- Days to Ship: 10 Day(s) or more -
MIYOSHI PIJON
Light and non-rusting pipe joint, and arm kit for mounting optical devices. The angle can be freely adjusted by combining #200 and #204.
Standard Price: SGD 60.76- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 58.80- Days to Ship: 7 Day(s) or more -
MISUMI
Suitable for mounting dial gauges. Optional parts for the magnetic base.
- Volume Discount
Standard Price: SGD 31.67 Days to Ship: 4 Day(s) or more -
MISUMI
Since a dial gauge spindle is tightened with a collet-shaped sleeve, the spindle will not be damaged.
- Volume Discount
Standard Price: SGD 39.42 Days to Ship: Same day -
Test Stand, Mechanical Type, Precision Type
ECE
Boasts of higher fixing force than the mechanical type.
Standard Price: SGD 361.78 Days to Ship: 7 Day(s) or more -
Magnet LED Light Stand (ME-LED-A)
KANETEC
A lighting stand with magnets and ON/OFF switch function.
[Features]
· The lighting direction can be flexibly changed by way of the suction surface without changing the mounting position.
· The protective guard can be used to prevent damage to the bulb if the product falls.
· Adopting an oil resistant power supply cord enables a wider variety of workplace applications.
· As the magnetic electric stand can be switched on/off with a single touch, it can be installed, removed, and moved easily in any location.
[Applications]
· Ideal for area lighting, such as for processing work performed at workbenches or with machine tools.Standard Price: SGD 369.12- Days to Ship: 7 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Free Guide Arm Type |
| Max. Arm Length L(mm) |
| Magnetic Base |
| Material |
| Surface Treatment |
| Free Guide Arm End Shape |
| Installation Location |
| Allowable Load(g) |
| Minimum Bending Radius R(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KANETEC | MISUMI | KANETEC | MISUMI | ECE | ECE | MISUMI | KANETEC | MISUMI | MISUMI | MIYOSHI PIJON | MIYOSHI PIJON | ECE | ECE | KANETEC | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MIYOSHI PIJON | MIYOSHI PIJON | ECE | MISUMI | MISUMI | ECE | KANETEC |
| Product Series | |||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
| Days to Ship | Same day or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | Same day | 7 Day(s) or more | 7 Day(s) or more | 7 Day(s) | Same day or more | Same day or more | 10 Day(s) or more | 10 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | Same day | Same day | 5 Day(s) or more | 6 Day(s) or more | 10 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | Same day | 7 Day(s) or more | 7 Day(s) or more |
| Type | Free Guide Arm | - | Lighting Arm | - | Free Guide Arm | Free Guide Arm | - | Free Guide Arm | - | - | Free Guide Arm | Free Guide Arm | Free Guide Arm | Free Guide Arm | Free Guide Arm | - | - | - | - | - | Free Guide Arm | Free Guide Arm | Free Guide Arm | - | - | Free Guide Arm | Lighting Arm |
| Free Guide Arm Type | Fixed Arm / Mechanical Locking Flex-Arm | - | Wing Screw Fastened | Screw Fastened / Wing Screw Fastened | Screw Fastened | Screw Fastened | Fixed Arm | Fixed Arm | - | Fixed Arm | Screw Fastened | Screw Fastened | Screw Fastened | Wing Screw Fastened | Fixed Arm | - | - | - | - | - | Screw Fastened | Screw Fastened | - | - | - | Screw Fastened | - |
| Max. Arm Length L(mm) | - | 100 ～ 300 | - | - | 347 | 131 | 272 ～ 432 | 345.5 | - | 155.5 ～ 432 | 100 ～ 300 | 100 ～ 300 | 340 ～ 435 | - | - | - | - | - | - | - | 100 ～ 300 | 100 ～ 300 | - | - | - | 278 | - |
| Magnetic Base | Provided | Not Provided | Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided |
| Material | - | - | - | - | Aluminum | Aluminum | - | - | - | - | Aluminum | Aluminum | Aluminum | Stainless Steel | - | - | - | - | - | - | Aluminum | Aluminum | Stainless Steel | - | - | Aluminum | - |
| Surface Treatment | - | - | - | - | Baked Paint | Baked Paint | - | - | - | - | Anodize | Anodize | Baked Paint | Not Provided | - | - | - | - | - | - | Anodize | Anodize | Not Provided | - | - | Baked Paint | - |
| Free Guide Arm End Shape | Tip Holder Through Hole | Both Ends Threaded | - | Both Ends Threaded / End Holders / One End Threaded, Other End Holder | Tip Holder Through Hole | Tip Holder Through Hole | Tapped Tip / Tip Holder Through Hole / Tip Holder Tapped Hole | Tip Holder Through Hole | - | Tapped Tip | - | - | Tip Holder Through Hole | Tip Holder Through Hole | Tip Holder Through Hole | - | - | - | - | - | - | - | - | - | - | Tip Holder Through Hole | - |
| Installation Location | Desk | - | - | - | Desk | Desk | - | - | - | - | Desk | Desk | Desk | Desk | Desk | - | - | - | - | - | Wall Surface | Wall Surface | Desk | - | - | Desk | Desk |
| Allowable Load(g) | - | 40 ～ 250 | - | - | 3000 | 1000 | 17.6 ～ 24.5 | - | - | 15 ～ 30 | - | - | 3000 | 3000 | - | - | - | - | - | - | - | - | - | - | - | 3000 | - |
| Minimum Bending Radius R(mm) | - | 40 ～ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Type
-
Free Guide Arm Type
-
Max. Arm Length L(mm)
-
Magnetic Base
-
Material
-
Surface Treatment
- Not Provided
- Anodize
- Baked Paint
-
Free Guide Arm End Shape
-
Installation Location
-
Allowable Load(g)
-
Minimum Bending Radius R(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Free Guide Arms, Magnet Bases
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?