(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Clamp Units (for Manual Tightening)（Page2）

The clamp unit (for hand tightening) is an auxiliary tool for holding and securing the workpiece while working. If the work is not firmly secured, it will lift up or become misaligned, so a clamp unit that is optimal for each work will be required. The shape and size vary depending on what is secured and how to secure it, such as a slide clamp that secures the workpiece from the side, etc. In addition, there are various types of clamp units, such as a type suitable for thin clamps that tighten while pressing the claw at the tip downward, a type that can be tightened steplessly according to the height of the workpiece, a side jack ideal for large processing machines, etc. Therefore, it is necessary to select the best one according to the application, work environment, etc.

122 items

: 30; 45; 60

Days to Ship	All Same day 4 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 17 Day(s) or Less 24 Day(s) or Less 42 Day(s) or Less

Base Unit 7110FA

NABEYA

It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

Standard Price:	SGD 517.91-
Days to Ship:	6 Day(s) or more

Hold Clamp, Stopper

NABEYA

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

Standard Price:	SGD 214.87-
Days to Ship:	6 Day(s) or more

Hold Clamp Set

NABEYA

Standard Price:	SGD 389.75-
Days to Ship:	6 Day(s) or more

Clamp Part of Wedge Clamp (For tapped holes)

NABEYA

The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

Standard Price:	SGD 104.92-
Days to Ship:	4 Day(s) or more

Side Clamp Jack

NABEYA

It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment

Standard Price:	SGD 166.80-
Days to Ship:	6 Day(s) or more

Side Jack B Type

NABEYA

[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· The tap hole opening is horizontal to the table. With stopper bolt.

Standard Price:	SGD 73.50-
Days to Ship:	6 Day(s) or more

Side Jack E Type

NABEYA

[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machines

Standard Price:	SGD 402.42-
Days to Ship:	6 Day(s) or more

Side Jack F Type

NABEYA

[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step part

Standard Price:	SGD 438.13-
Days to Ship:	6 Day(s) or more

Start Element 7110FT

NABEYA

S45C / quenched base unit low type (for T slot).

Standard Price:	SGD 378.65-
Days to Ship:	6 Day(s) or more

Double swing clamp set S type

NABEYA

This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

Standard Price:	SGD 109.91-
Days to Ship:	4 Day(s) or more

Toggle Down Clamp 6803

NABEYA

[Features]
· SS400 and galvanized toggle down clamp 6803.
· 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

Standard Price:	SGD 83.23-
Days to Ship:	4 Day(s) or more

Hold Clamp, Clamp

NABEYA

Standard Price:	SGD 323.07-
Days to Ship:	6 Day(s) or more

Low Edge Clamp (Double Sided Type)

NABEYA

It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

Standard Price:	SGD 30.38-
Days to Ship:	4 Day(s) or more

Four-Groove

NABEYA

Maximum tightening force: 40 kN (tightening torque: 190 N·m)

Standard Price:	SGD 2,594.84-
Days to Ship:	6 Day(s) or more

Heavy Duty Toggle Side Clamp 6842PL

NABEYA

Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

Standard Price:	SGD 223.36-
Days to Ship:	6 Day(s) or more

Heavy Duty Toggle Side Clamp 6845

NABEYA

Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

Standard Price:	SGD 161.46
Days to Ship:	4 Day(s) or more

Quick Down Clamp

NABEYA

Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).

Standard Price:	SGD 191.08-
Days to Ship:	4 Day(s) or more

PA Feed Plate for Quick Lock

NABEYA

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Standard Price:	SGD 17.82
Days to Ship:	7 Day(s) or more

Adjustment Bolt for Quick Lock

NABEYA

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Standard Price:	SGD 43.02-
Days to Ship:	7 Day(s) or more

Oil Cup for Quick Lock

NABEYA

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Standard Price:	SGD 6.37
Days to Ship:	7 Day(s) or more

Wedge Clamp Stopper Part (For T-shaped grooves)

NABEYA

It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.

Standard Price:	SGD 145.72-
Days to Ship:	6 Day(s) or more

Wedge Clamp Stopper Part (For tapped holes)

NABEYA

Wedge clamp, stopper tapped hole, flat type.

Standard Price:	SGD 99.47-
Days to Ship:	6 Day(s) or more

Wedge Clamp Set (For tapped holes)

NABEYA

The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

Standard Price:	SGD 236.59-
Days to Ship:	4 Day(s) or more

Applicable Clamp Units 7110M

NABEYA

This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.

Standard Price:	SGD 572.39-
Days to Ship:	6 Day(s) or more

Swing Clamp B Type

NABEYA

It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

Standard Price:	SGD 423.68-
Days to Ship:	6 Day(s) or more

Swing Clamp A Type

NABEYA

[Features]
· It can be horizontally swung to attach and remove workpieces.
· Can be used for T-grooves and for tapped holes.
· The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
· Tool-less (with handle).
· Free clamping direction (without guide groove).
· The built-in spring causes it to automatically rise when unclamping.
· Attachments can be mounted

Standard Price:	SGD 449.81-
Days to Ship:	4 Day(s) or more

Swing Clamp Joint S Type

NABEYA

This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types available

Standard Price:	SGD 18.55-
Days to Ship:	4 Day(s) or more

Toggle Down Clamp 6802

NABEYA

Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.

Standard Price:	SGD 64.06-
Days to Ship:	4 Day(s) or more

Toggle Hook Clamp 6847

NABEYA

Suitable for tightening drum and can lids. The hook length can be adjusted.

Standard Price:	SGD 108.23-
Days to Ship:	6 Day(s) or more

Toggle Hook Clamp 6847S

NABEYA

The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.

Standard Price:	SGD 248.98
Days to Ship:	6 Day(s) or more

PA Adjustment Bolt for Quick Lock

NABEYA

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Standard Price:	SGD 17.82-
Days to Ship:	7 Day(s) or more

PA Spring for Quick Lock

NABEYA

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Standard Price:	SGD 25.18
Days to Ship:	7 Day(s) or more

Side Jack A Type

NABEYA

Simply insert into the T-groove. Useful for receiving cutting resistance from the side.

Standard Price:	SGD 56.45-
Days to Ship:	6 Day(s) or more

Start Element ZA

NABEYA

It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

Standard Price:	SGD 371.31-
Days to Ship:	6 Day(s) or more

Start Element 7110FB

NABEYA

It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

Standard Price:	SGD 284.38-
Days to Ship:	6 Day(s) or more

Start Element 7110Z

NABEYA

S45C / hardened spacer element standard type.

Standard Price:	SGD 253.85-
Days to Ship:	6 Day(s) or more

Draw Clamp

NABEYA

The workpiece is fixed in place by pulling it in from below. Minimal interference with the blade, ideal for 5-axis and composite machine clamps.

Standard Price:	SGD 74.20-
Days to Ship:	6 Day(s) or more

Toggle Down Clamp 6832

NABEYA

[Features]
· SS400/galvanized toggle down clamp 6832.
· 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

Standard Price:	SGD 49.25-
Days to Ship:	4 Day(s) or more

Toggle Down Clamp 6833

NABEYA

Hold down toggle clamp 6833 made of SS400 and zinc plating.

Standard Price:	SGD 136.55
Days to Ship:	6 Day(s) or more

Toggle Side Clamp 6841

NABEYA

6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

Standard Price:	SGD 91.51-
Days to Ship:	4 Day(s) or more

Toggle Hook Clamp 6848H

NABEYA

6848HNI is made of stainless steel. The hook length can be adjusted.

Standard Price:	SGD 90.95-
Days to Ship:	4 Day(s) or more

Universal Clamp Semi-Cylindrical Sealing Washer

NABEYA

[Features]
· Parts for universal clamps.
· The swivel pad fits on the workpiece and clamping surface for vertical tightening.
· Although this product is equipped with T-nuts, it can also be used with them removed

Standard Price:	SGD 13.84-
Days to Ship:	4 Day(s) or more

Heavy Duty Toggle Side Clamp 6842

NABEYA

Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

Standard Price:	SGD 217.32-
Days to Ship:	6 Day(s) or more

Nut Runner Clamp Large Model

NABEYA

A clamp bar for L-type nut runners. This product can be additionally processed by the customer.

[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Clamp bar springs up to easily attach/detach the workpiece.
· Free from troubles such as oil leakage as it does not use oil.

Standard Price:	SGD 781.37-
Days to Ship:	6 Day(s) or more

Clamp Bar for Nut Runner Clamp Large Model

NABEYA

A clamp bar for L-type nut runners. This product can be additionally processed by the customer.

Standard Price:	SGD 76.31-
Days to Ship:	6 Day(s) or more


Brand
Product Series
Days to Ship


Brand	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA
Product Series	Base Unit 7110FA	Hold Clamp, Stopper	Hold Clamp Set	Clamp Part of Wedge Clamp (For tapped holes)	Side Clamp Jack	Side Jack B Type	Side Jack E Type	Side Jack F Type	Start Element 7110FT	Double swing clamp set S type	Toggle Down Clamp 6803	Hold Clamp, Clamp	Low Edge Clamp (Double Sided Type)	Four-Groove	Heavy Duty Toggle Side Clamp 6842PL	Heavy Duty Toggle Side Clamp 6845	Quick Down Clamp	PA Feed Plate for Quick Lock	Adjustment Bolt for Quick Lock	Oil Cup for Quick Lock	Wedge Clamp Stopper Part (For T-shaped grooves)	Wedge Clamp Stopper Part (For tapped holes)	Wedge Clamp Set (For tapped holes)	Applicable Clamp Units 7110M	Swing Clamp B Type	Swing Clamp A Type	Swing Clamp Joint S Type	Toggle Down Clamp 6802	Toggle Hook Clamp 6847	Toggle Hook Clamp 6847S	PA Adjustment Bolt for Quick Lock	PA Spring for Quick Lock	Side Jack A Type	Start Element ZA	Start Element 7110FB	Start Element 7110Z	Draw Clamp	Toggle Down Clamp 6832	Toggle Down Clamp 6833	Toggle Side Clamp 6841	Toggle Hook Clamp 6848H	Universal Clamp Semi-Cylindrical Sealing Washer	Heavy Duty Toggle Side Clamp 6842	Nut Runner Clamp Large Model	Clamp Bar for Nut Runner Clamp Large Model
Days to Ship	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more