Rod End Bearings, Spherical Bearings（Ball Material：Steel）

• 

  Rod End (Piston Rod End Bracket)

  SMC

  [Features]
  ・ The product offers smooth rotation and the automatic alignment feature.
  ・ It can be used as an auxiliary bracket for the swing mechanism.
  ・ It is possible to reduce the design labor hours and assembly labor hours of the swing mechanism.
  ・ It can be used for other purposes than connecting to a cylinder.

  Standard Price:	SGD 9.92-
  Days to Ship:	46 Day(s)

• 

  Rod End Male Threaded Type (Lubrication-free) NOS-T

  THK

  This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.90-
  Days to Ship:	4 Day(s) or more

• 

  Rod End, Female Thread Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.73-
  Days to Ship:	Same day or more

• 

  Pillow Ball

  IKO

  [Features]
  · Contains an oil groove and one oil hole on the outer ring.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 13.59-
  Days to Ship:	Same day or more

• 

  Rod End Male Threaded POS Type

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  CAD ：

  2D / 3D

  Standard Price:	SGD 9.90-
  Days to Ship:	Same day or more

• 

  Spherical Slide Bearing

  IKO

  [Features]
  · Contains an oil groove and two oil holes on both the inner and outer rings.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 13.59-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearings - Standard L Short Type

  MISUMI

  [Main Body Material]S35C; Connection thread shape: You can choose male or female threads.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 11.62-
  Days to Ship:	Same day or more

• 

  Male Thread Type Rod End POS Series

  OZAK

  [Features]
  ・ By inserting a special steel alloy into a structural carbon steel holder or outer ring with a high-accuracy bearing steel ball as the inner ring, you can obtain smooth and abrasion-resistant, self-centering, rotation, and oscillating motion

  Standard Price:	SGD 15.54-
  Days to Ship:	4 Day(s) or more

• 

  Rod End, Female Thread Type PHS Series

  OZAK

  [Features]
  ・ By inserting a special steel alloy into a structural carbon steel holder or outer ring with a high-accuracy bearing steel ball as the inner ring, you can obtain smooth and abrasion-resistant, self-centering, rotation, and oscillating motion

  Standard Price:	SGD 16.58-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearing, Standard Type, Model PB

  THK

  A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.27-
  Days to Ship:	4 Day(s) or more

• 

  Spherical Bearing - Standard Type

  MISUMI

  [Material]Holder: S35C, spherical inner ring: SUJ2 (58HRC or more), Boots: special copper alloy with surface treatment options: Spherical inner ring: rigid chrome plating

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.00-
  Days to Ship:	Same day or more

• 

  Link Ball, Male Threaded Holder, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  CAD ：

  2D / 3D

  Standard Price:	SGD 7.30-
  Days to Ship:	4 Day(s) or more

• 

  Rod End, Female Thread Type (Lubrication-Free) NHS-T Type

  THK

  An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
  The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
  
  [Features]
  · NHS-T Type (oil free type)

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.92-
  Days to Ship:	4 Day(s) or more

• 

  Spherical Bearing SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.07-
  Days to Ship:	4 Day(s) or more

• 

  TRUSCO rod end oil free male screw【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 20.40-
  Days to Ship:	4 Day(s) or more

• 

  Lubricated Type Spherical Plain Bearing

  CCVI

  ● This self-aligning type bearing has inner and outer rings with spherical sliding surfaces, so it can bear a large radial load and bi-directional axial load at the same time.
  ● The surfaces of the inner and outer rings are phosphate-treated and its sliding surfaces are coated with MoS2, making it ideal for low torque applications. This bearing offers excellent abrasion resistance and is mostly used in industrial machinery and construction machinery.
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  Standard Price:	SGD 12.98-
  Days to Ship:	4 Day(s) or more

• 

  Link Ball, Female Thread Holder, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.62-
  Days to Ship:	4 Day(s) or more

• 

  Pillow Ball, Insert Type PBI Series

  OZAK

  [Features]
  ・ By inserting a special steel alloy into a structural carbon steel holder or outer ring with a high-accuracy bearing steel ball as the inner ring, you can obtain smooth and abrasion-resistant, self-centering, rotation, and oscillating motion

  Standard Price:	SGD 15.75-
  Days to Ship:	9 Day(s) or more

• 

  Spherical Bearing Holder Sets - Standard Type

  MISUMI

  [Type]Spherical bearing "Type of spherical bearing" Flange type 4 circles "Main body material" S35C "Ball material" SUJ2 "Bushing material" Special copper alloy

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 79.01-
  Days to Ship:	Same day or more

• 

  Spherical Surface Bearing SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  CAD ：

  2D / 3D

  Standard Price:	SGD 26.56
  Days to Ship:	4 Day(s) or more

• 

  TRUSCO Rod End Lubricated Type Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 18.92-
  Days to Ship:	4 Day(s) or more

• 

  TRUSCO rod end oil free female screw【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 20.40-
  Days to Ship:	4 Day(s) or more

• 

  TRUSCO rod end lubricating male screw【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  Standard Price:	SGD 18.92-
  Days to Ship:	4 Day(s) or more

• 

  Lubricated Type Spherical Plain Bearing, Inner Ring Wide Type

  CCVI

  ● The features are identical to the GE type, but it is bigger than the GE type and has a larger load capacity
  ● Used widely in Japan
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  Standard Price:	SGD 17.79-
  Days to Ship:	4 Day(s) or more

• 

  Lubricated Type Spherical Plain Bearing with Seal

  CCVI

  ● The GE type with seal is effective in stopping grease leakage and blocking out dust.
  ● Construction machinery parts
  ● Hydraulic cylinder parts
  ● Agricultural machinery parts
  ● Robot parts
  ● Transport equipment parts

  Standard Price:	SGD 19.68-
  Days to Ship:	7 Day(s) or more

• 

  Drive machine cylinder load end CRE series

  KOGANEI

  11 types are available by thread size. Compatible with ø6 to 100 air cylinders.
  
  [Features]
  · Backs up cylinder function with smooth link motion.
  · 11 types are available by thread size.
  · Compatible with ø6 to 100 air cylinders.
  · This model uses a fluororesin liner, making it oil free and maintenance-free.

  CAD ：

  2D / 3D

  Standard Price:	SGD 11.03-
  Days to Ship:	4 Day(s) or more

• 

  L-Ball

  IKO

  [Features]
  · Grease filled part.

  • Volume Discount

  Standard Price:	SGD 5.97-
  Days to Ship:	4 Day(s) or more

• 

  Rod End Bearing, Link Bowl L Type [RTLBL]

  STRUENING

  A link ball L type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.01-
  Days to Ship:	8 Day(s)

• 

  Rod end bearings right male screw metal type 4 piece PR-E

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  CAD ：

  2D

  Standard Price:	SGD 39.40
  Days to Ship:	5 Day(s) or more

• 

  Rod End Bearing - Left female Screw - Metal Type - Four Pieces - PRL

  MINEBEA

  Also referred to as "Insert type," the construction features two insert pieces that are press-fitted in the body head end face from both sides. Assembly of the 4 piece rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. The body is made from S48C equivalent, providing relatively high tensile strength of 568N/mm┣sup┫2┣/sup┫ and a copper alloy insert offers resistance to seizure. This rod end bearing is widely used for construction and general industrial machinery.

  CAD ：

  2D

  Standard Price:	SGD 35.00
  Days to Ship:	5 Day(s) or more

• 

  Rod end bearing - Right female screw - Metal type - Four pieces - PR

  MINEBEA

  Also referred to as "Insert type," the construction features 2 insert pieces that are press-fitted in the body head end face from both sides. Assembly of this rod end bearing is simple and economical, as it does not require spherical bearings like the 3 piece rod end. Since S48C equivalent is used for the body material, the tensile strength is relatively high at 568 N/mm2. Since the insert uses a copper alloy and is resistant to seizure, it is widely used in construction machinery and general industrial machinery.

  CAD ：

  2D

  Standard Price:	SGD 10.95
  Days to Ship:	4 Day(s) or more

Loading...