Conveyer Rollers（Bearing：Double）

• 

  Conveyor Rollers-Metal/Steel

  MISUMI

  Roller for metal conveyor with bearing. Materials can be selected from steel, aluminum alloy, and stainless steel (SUS304).

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.80-
  Days to Ship:	Same day or more

• 

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.46-
  Days to Ship:	Same day or more

• 

  Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 12.0 × Width 90 - 390

  MAKITECH

  High durability φ 12 mm roller which employs a standard bearing. Suitable for transporting small parts. Roller unit of the S-1216NB roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Roller, M Series (RS-1010), Diameter φ 10 × Width 50 - 200

  MAKITECH

  Ultra-fine φ10 stainless steel roller which employs a standard bearing. Roller unit parts for RS-1010, suitable for small item transport.
  
  [Features]
  · The roller diameter is φ10.0. The roller interval is P12.4.
  · Standard roller width (nominal) is 50W to 200W in increments of 50mm.
  · Standard bearing: high durability.
  · Aluminum extrusion

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Conveyor Rollers-Urethane Lined Type

  MISUMI

  Urethane lined conveyor roller with bearing. The core metal material can be selected from steel, aluminum alloy, and stainless steel (SUS304).
  Please refer to the specification table for roller strength.
  The shore (hardness) of urethane is A90, A70, A50, and the color is natural. Urethane thickness can be selected from 3, 4, and 5.
  A90 is ether urethane, A50/A70 is ester urethane.
  Additionally, the urethane of Shore A90 can be changed to antistatic urethane through additional machining (UDC).

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)

  OKURA

  Medium load ⌀48.6 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

  Standard Price:	SGD 18.10-
  Days to Ship:	5 Day(s) or more

• 

  Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790

  MAKITECH

  [Features]
  - φ42 stainless steel roller.
  Individual roller for SS-4212 moderate load roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Conveyor Roller (for Light Loads) SERIES FF1

  FUJI SEISAKUSHO

  [Features]
  Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.

  Standard Price:	SGD 9.26-
  Days to Ship:	4 Day(s) or more

• 

  Steel Roller, M Series (HG-R1210A), Diameter φ12.0 x Width 100 - 400

  MAKITECH

  Superfine φ 12 steel roller. Individual roller for HG-R1210A roller conveyor, which is optimal for light/small item transport. The widths can be specified in 1 mm increments from 50 to 400 mm.
  
  [Features]
  · The roller diameter is 12.0 mm. The minimum roller interval is P15.
  · The standard roller width (nominal) is 100 to 400 mm at intervals of 50 mm.
  · Configurable size is available.
  · Machined bearings: high quality.
  · One of the most popular φ 12 diameter roller products on the market.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø38 × Width 90-690 (QR Model)

  OKURA

  Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 15.29-
  Days to Ship:	4 Day(s) or more

• 

  Motor Roller PSQ Type

  OKURA

  ø38 standard type roller width 305 to 490 mm can be specified.
  [Features]
  ・ A general-purpose type motor roller that has the same diameter (ø38) as the QR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 301.42-
  Days to Ship:	16 Day(s) or more

• 

  Steel rollers (rollers for conveyors) M series (R-5721NB)

  MAKITECH

  φ 57 mm, T2.6 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5721NB roller conveyor.
  
  [Features]
  · Easy to install thanks to the bearing and resin integrated boss.
  · Silent type.
  · High durability thanks to standard bearing.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Motor Roller PSS-E Type

  OKURA

  ø57 drive
  ・ Free type, roller width 390 to 990 mm can be specified.
  [Features]
  ・ It is a roller that can be used as a motor roller when energized (power supply on ) and as a free roller when not energized (power supply off).
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 306.35-
  Days to Ship:	14 Day(s) or more

• 

  Motor Roller PSL Type

  OKURA

  ø48.6 Standard type Roller width 305 to 690 mm can be specified.
  [Features]
  ・ It is a general-purpose type motor roller that has the same diameter (ø48.6) as the LR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 343.42-
  Days to Ship:	16 Day(s) or more

• 

  Motor Roller PSP Type

  OKURA

  ø42.7 standard type roller width 305 to 690 mm can be specified.
  [Features]
  ・ It is a general-purpose type motor roller that has the same diameter ø42.7) as the PR type free roller and is compatible.
  ・ A wide range of specifications such as roller width and speed are available to support various operating conditions such as continuous operation and intermittent operation.

  Standard Price:	SGD 289.05-
  Days to Ship:	13 Day(s) or more

• 

  Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)

  OKURA

  Dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

  Standard Price:	SGD 64.16-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)

  OKURA

  Roller diameter ⌀76.3 is the largest for steel rollers. For heavy objects measured in units of tons. Transport distance and roller width can be specified within the range of 150 - 1190 mm.

  Standard Price:	SGD 49.31-
  Days to Ship:	6 Day(s) or more

• 

  Stainless Steel Roller, M Series (HG-RS1210), Diameter φ 12 × Width 100 - 400

  MAKITECH

  Superfine φ12 stainless steel roller. All stainless steel individual roller for HG-RS1210 roller conveyor, which is optimal for transport of small items.
  
  [Features]
  · The roller diameter is φ12.0. The minimum roller interval is P15.
  · Standard roller width (nominal) is 100W to 400W in 50mm increments.
  · Can be manufactured to desired size.
  · L Type Frame

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller (Conveyor Roller) M Series (R-1912P)

  MAKITECH

  Popular φ19 individual roller for low-cost R-1912P roller conveyor, which is optimal for light / small item transport. The widths can be specified in 1 mm increments from 100 to 500 mm.
  
  [Features]
  · The roller diameter is φ19.1. The minimum roller interval is P20.
  · Standard roller width (nominal) is 100W to 500W in 50mm increments.
  · Can be manufactured to desired size.
  · Popular product, pressed-in bearing, inexpensive type, and φ19.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Motor Roller PSS-V Type

  OKURA

  ø57, V pulley type, roller width 390 to 990 mm can be specified.
  [Features]
  ・ As a drive roller with a V pulley, a free roller of the same shape is linked with a sewing-machine belt.
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 445.94-
  Days to Ship:	14 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

  OKURA

  Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Standard Price:	SGD 23.25-
  Days to Ship:	5 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor) Resin Bearing Type (Stainless Steel Shaft), Diameter ⌀42 × Width 240 - 490 (ZARS Type)

  OKURA

  Water resistant, low noise type with resin bearings. Stainless steel shaft. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Standard Price:	SGD 34.21-
  Days to Ship:	7 Day(s) or more

• 

  Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)

  OKURA

  Compact design with a frame internal radius of 500 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

  Standard Price:	SGD 74.03-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)

  OKURA

  Durable type dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305-790 mm.

  Standard Price:	SGD 92.81-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀19.1 × Width 90 - 490 (ER Type)

  OKURA

  Smallest available steel roller. Optimal for small item transport. Transport distance and roller width can be specified within the range of 90 - 490 mm.

  Standard Price:	SGD 23.57-
  Days to Ship:	7 Day(s) or more

• 

  Steel Roller Starter, High Strength Type, Diameter ø60.5 × Width 90 to 990 (MMR Type)

  OKURA

  Shock-resistant. Improved strength compared to the MR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.

  Standard Price:	SGD 34.82-
  Days to Ship:	5 Day(s) or more

• 

  Stainless Steel Roller Curve Conveyor, Diameter ø42.7 × Width 305-690 (NTS Type)

  OKURA

  [Features]
  · Tapered roller conveyor for curves with a roller diameter of ø42.7.
  · Conveyor length and roller width within the range of 305 to 790 mm can be specified.

  Standard Price:	SGD 180.41-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)

  OKURA

  Stainless steel roller with minimum roller diameter of ⌀18. Optimal for transport of ultra-small materials. Transport distance and roller width can be specified within the range of 90 - 390 mm.

  Standard Price:	SGD 33.15-
  Days to Ship:	7 Day(s) or more

• 

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)

  OKURA

  Roller diameter of ⌀42.7 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 49.62-
  Days to Ship:	5 Day(s) or more

• 

  Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 690 (SRS Type)

  OKURA

  Roller diameter of ⌀57 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	SGD 72.38-
  Days to Ship:	5 Day(s) or more

• 

  Single Unit Plastic Roller (Roller for Conveyor) Diameter ⌀40 × Width 240 - 390 (BRA Type)

  OKURA

  ⌀40 resin roller for light loads. Transport distance and roller width can be specified within the range of 240 - 390 mm.

  Standard Price:	SGD 40.38-
  Days to Ship:	5 Day(s) or more

• 

  Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)

  OKURA

  [Features]
  • ⌀40 resin rollers for loads.
  • Stainless steel shaft type.
  • Transport distance and roller width can be specified within the range of 90 - 490 mm.

  Standard Price:	SGD 35.13-
  Days to Ship:	7 Day(s) or more

• 

  Steel Roller, S Series (S-1912P) Diameter φ19.1 × Width 90 - 490

  MAKITECH

  Small-diameter φ19 steel roller. Roller unit parts for S-1912P roller conveyor, suitable for small item transport.
  
  [Features]
  ·Roller diameter is φ19.1. Minimum roller spacing is P22.
  · Standard roller width (nominal) is the standard size of 90W to 490W.
  · Configurable size is available.
  · The pressed-in bearing, inexpensive φ19 type is a big seller.
  · Model 60 frame

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller Conveyor, M Series (R-6023P), Diameter φ 60.5 × Width 100 - 1000

  MAKITECH

  Medium load φ 60 steel roller. Roller unit of the R-6023P roller conveyor. The widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The thickness is T2.3. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Pressed-in bearing; inexpensive type.
  · Model 90 frame standard type.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller (Roller for Conveyor), M Series (R-4832), Diameter φ 48.6 × Width 100 - 500

  MAKITECH

  Moderate load φ48 / t3.5 thick black leather treated steel roller with enhanced shock resistance. Roller unit of the R-4832 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1000 mm.
  
  [Features]
  · The roller diameter is φ48.6. The thickness is t3.5. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller (Conveyor Roller) M Series (R-6023)

  MAKITECH

  Highly versatile moderate load / high quality type φ60 steel roller. Roller unit of the R-6023 roller conveyor.
  
  [Features]
  · The roller diameter is φ60.5. The thickness is t2.3. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-6023D) diameter φ 60.5 x width 100-1000

  MAKITECH

  R-6023 with adjustable roller width. The widths can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-6023D roller conveyor.
  
  [Features]
  · The roller diameter is φ60.5. The thickness is t2.3. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Tapered Roller (Roller for Conveyor), M Series (R1200), Diameter φ 48.0 × Width 200 - 600

  MAKITECH

  A light to medium load type with the inside frame radius of 1200mm. Roller unit of the R-TC1200 roller conveyor. The widths can be specified in 1 mm increments from 200 to 600 mm.
  
  [Features]
  · 90 degree angle for use with 1, 200 mm internal diameters.
  · Standard roller width (nominal) is 200W to 600W in 50mm increments.
  · Can be manufactured to desired size

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Steel Tapered Roller (Roller for Conveyor), M Series (R320), Diameter φ 31.2 × Width 300

  MAKITECH

  A light to medium load type with the inside frame radius of 320mm. Use it in confined spaces that call for a small radius. Roller unit of the R-TC320 roller conveyor.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Steel Roller (Conveyor Roller), M Series (Drop-In Frame), Diameter φ 60.5 × Width 100 - 1000

  MAKITECH

  φ60 steel roller/drop-in frame for moderate loads makes roller replacement easy. Roller unit of the RH-6023P roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), S Series (SA-1810), Diameter φ18.1 × Width 100 - 500

  MAKITECH

  φ 18 aluminum roller. Suitable for transporting small parts. Roller unit of the SA-1810 roller conveyor.
  
  [Features]
  · The roller diameter is 18.0 mm. The minimum roller interval is P20.
  · The standard of the roller width (nominal) is 100 to 500 mm at intervals of 50 mm.
  · Configurable size is available.
  · Press bearing.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Roller (Conveyor Roller), S Series (S-5714P), Diameter φ 57.2 × Width 90 - 990

  MAKITECH

  A most versatile, medium-load, economical type ⌀ 57-mm steel roller. A single roller unit for the S-5714P roller conveyor.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Motor Roller PHM Type

  OKURA

  ø60.5, standard type, roller width 305 to 990 mm can be specified.
  [Features]
  ・ A high torque type with approx. 1.5 times the driving force of PSM.
  ・ It includes terminal block and detent bracket.

  Standard Price:	SGD 347.11-
  Days to Ship:	21 Day(s) or more

Loading...