Bearing Units

• 

  Ball Bearing/Cast Iron/Pillow Blocks

  MISUMI

  This is one of the most typical type ball bearing unit, and a bearing is built into the robust and integrally structured housing.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.83-
  Days to Ship:	Same day or more

• 

  Ball Bearing/Diamond Flanged

  MISUMI

  [Features]This is a lubrication-free two-bolt flange type ball bearing unit.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.50-
  Days to Ship:	Same day or more

• 

  Ball Bearing/Pillow Blocks

  MISUMI

  [Features]This is a lubrication-free pillow type ball bearing unit. 2 types are available: set screw fixed type and eccentric ring fixed type.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.50-
  Days to Ship:	Same day or more

• 

  Ball Bearing Unit, Cast Iron Pillow

  NTN

  One of the standard formats for bearing units, this product is equivalent to the combination of a plummer block and a self-aligning ball bearing. Can be mounted to the shaft by just tightening a ball screw, and is used frequently in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.00-
  Days to Ship:	Same day or more

• 

  Pillow Block Unit with Set Screws, Cylindrical Hole Shape, UCP

  ASAHI SEIKO

  Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Standard Price:	SGD 15.65-
  Days to Ship:	Same day or more

• 

  Bearing Unit, Cast Iron Flange Shape

  NTN

  The bearing box has a rectangular shape and can be mounted on machinery side walls and other surfaces with four bolts. Because the bearing peripheral structure can also be mounted easily, this flange shape is used in the widest range of applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 18.36-
  Days to Ship:	Same day or more

• 

  Square Flange Mount Unit with Set Screw, Cylindrical Hole Shape, UCF

  ASAHI SEIKO

  [Features]
  · The bearing box is a rectangular shape, and is mounted to the side walls of machinery. As a result, the bearing mounting part has a simple structure and can be used for a wide range of applications.

  Standard Price:	SGD 16.01-
  Days to Ship:	Same day or more

• 

  Stretcher Unit

  NTN

  A combination of a channel steel frame and bearing unit which can be used for applications that require a movable axis, including adjustment of belts and chains.

  CAD ：

  2D / 3D

  Standard Price:	SGD 68.10-
  Days to Ship:	4 Day(s) or more

• 

  Ball Bearing/Cast Iron/Diamond Flanged

  MISUMI

  [Features]It is used by attaching it to a vertical surface such as the side of a machine. The compact type is more lightweight with a more compact design than the standard type.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.66-
  Days to Ship:	Same day or more

• 

  Insert Bearing RB

  NIPPON PILLOW BLOCK

  ER-type bearing with the oil supply mechanism and stopping ring removed.
  Grease-sealed deep-groove ball bearing with an outer ring that has a cylindrical outer diameter surface and an inner ring that has cylindrical holes with set screws included.

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.96-
  Days to Ship:	4 Day(s) or more

• 

  Diamond Flange Mount Unit, Silver Series with Set Screws, Cylindrical Hole Shape, KFL

  ASAHI SEIKO

  [Features]
  · The bearing box is a diamond flange shape and can be mounted with two bolts, so it is optimal for space saving.

  Standard Price:	SGD 13.50-
  Days to Ship:	Same day

• 

  Diamond Flange Mount Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UFL

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  Also, the bearing box is marked with a center mark for easy positioning.

  Standard Price:	SGD 12.21-
  Days to Ship:	Same day or more

• 

  Plummer Block

  NTN

  This plummer block is a bearing box for either automatic spherical roller bearings or self-aligning ball bearings.
  [Features]
  ·It can be used as a sealing device by incorporating felt seals, rubber seals or labyrinth seals, and can be lubricated by grease or oil.

  Standard Price:	SGD 88.14-
  Days to Ship:	4 Day(s) or more

• 

  Ball Bearing/Cast Iron/Square Flanged

  MISUMI

  [Features]It is used by attaching it to a vertical surface such as the side of a machine. Selectable from lubrication and lubrication-free types.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.00-
  Days to Ship:	Same day or more

• 

  Cast Iron Diamond Flange Shape

  NTN

  A compact and lightweight, rhombic flange mount unit.
  [Features]
  ·Cylindrical bore, set screw type.

  CAD ：

  2D / 3D

  Standard Price:	SGD 18.69-
  Days to Ship:	Same day or more

• 

  Pillow Block Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Standard Price:	SGD 9.17-
  Days to Ship:	4 Day(s) or more

• 

  Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, UCFK Type

  ASAHI SEIKO

  Constructed with 3 mounting bolt holes on one side, and limitations on the mounting surface. Suitable for areas where it can be mounted only from one direction

  Standard Price:	SGD 21.51-
  Days to Ship:	4 Day(s) or more

• 

  Insert Bearing UC

  NIPPON PILLOW BLOCK

  Grease-sealed deep-groove ball bearing with an outer ring that has a spherical outer diameter surface fitted with an oil supply mechanism, as well as a wide inner ring that has cylindrical holes with set screws included.

  Standard Price:	SGD 12.29-
  Days to Ship:	4 Day(s) or more

• 

  Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BLFL Type

  ASAHI SEIKO

  The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.

  Standard Price:	SGD 16.15-
  Days to Ship:	4 Day(s) or more

• 

  Take-Up Type Unit UCTH With Steel Frame

  NIPPON PILLOW BLOCK

  Comprises the take-up unit, a section steel frame, adjuster bolts, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 153.78-
  Days to Ship:	4 Day(s) or more

• 

  Diamond Flange Mount Unit, Cylindrical-Bore Type With Set Screws, UCFL Type

  ASAHI SEIKO

  [Features]
  · The bearing box is a diamond shape mounted with two bolts, so it can be used in any place and is simple to mount to machinery.

  Standard Price:	SGD 15.60-
  Days to Ship:	Same day or more

• 

  Pillow Block Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP

  ASAHI SEIKO

  [Features]
  · Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.
  · The fixation method for the bearing box and shaft is the set screw method.

  Standard Price:	SGD 16.77-
  Days to Ship:	Same day or more

• 

  Bearing Unit Cover, Single Unit

  NTN

  A dust-proof cover for use with bearing units. Insert into a unit to use.

  Standard Price:	SGD 6.04-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Pillow-Type Unit UCP

  NIPPON PILLOW BLOCK

  [Features]One of the most representative model of bearing unit. Unit type: insert bearing unit

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.28-
  Days to Ship:	4 Day(s) or more

• 

  Take-Up Unit With Steel Plate Frame SBNPTH

  NIPPON PILLOW BLOCK

  The SBNPTH is a lightweight type unit that combines a steel plate take-up unit, a steel plate frame, and an adjustment bolt.
  The bearing box can be moved in a radial direction using the adjustment bolt to adjust the support position for the shaft.
  A compact and lightweight unit with a bearing box and frame made of pressed steel plate.
  The frame is mounted to the machine body with 4 bolts.

  Standard Price:	SGD 68.30
  Days to Ship:	4 Day(s) or more

• 

  Ball Bearing for Units

  NTN

  Bearing product for use with bearing units. Insert into a unit to use.

  Standard Price:	SGD 4.84-
  Days to Ship:	Same day or more

• 

  Cast Iron Round Flanged With Spigot Joint

  NTN

  Appropriate for use in areas that require medium load and mounting accuracy, such as the main shaft of stirring equipment.

  CAD ：

  2D / 3D

  Standard Price:	SGD 23.02-
  Days to Ship:	Same day or more

• 

  Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type

  ASAHI SEIKO

  Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.

  Standard Price:	SGD 167.73-
  Days to Ship:	9 Day(s) or more

• 

  Pillow Block Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.

  Standard Price:	SGD 15.27-
  Days to Ship:	Same day or more

• 

  Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape

  ASAHI SEIKO

  [Features]
  · Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.

  Standard Price:	SGD 12.08-
  Days to Ship:	4 Day(s) or more

• 

  Lightweight Diamond Flange Mount Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Standard Price:	SGD 7.47-
  Days to Ship:	4 Day(s) or more

• 

  Steel Plate Ball Bearing Units/Shaft End Caps/Flanged

  MISUMI

  [Features]This is an inexpensive ball bearing unit (flange type) that combines 2 pressed steel plates.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 12.80-
  Days to Ship:	Same day or more

• 

  Cast Iron Center Height Pillow Block Unit UCHP

  NTN

  A high center pillow unit optimal for when the shaft center is a long distance from the base.

  CAD ：

  2D / 3D

  Standard Price:	SGD 25.60-
  Days to Ship:	Same day or more

• 

  Insert Bearing ER

  NIPPON PILLOW BLOCK

  Grease-sealed deep-groove ball bearing with an outer ring that has a cylindrical outer diameter surface fitted with an oil supply mechanism and a stopper ring, as well as a wide inner ring that has cylindrical holes with set screws included

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.08-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Pillow Block Unit UCPH

  NIPPON PILLOW BLOCK

  Designed as a high-center pillow unit with high strength to shock loads.

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.09-
  Days to Ship:	4 Day(s) or more

• 

  Insert Bearing SB

  NIPPON PILLOW BLOCK

  The SB type bearing is an oil free grease-sealed deep-groove ball bearing with an outer ring that has a spherical surface on the outer diameter and a wide inner ring that has cylindrical holes with set screws included.
  
  A lightweight bearing suitable for use with light to normal loads, that can be easily and securely attached to the shaft using the 2 inner ring set screws with a 120° interval.
  

  Standard Price:	SGD 10.52-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Pillow

  NTN

  A stainless steel bearing unit filled with grease for food processing machinery. Has excellent corrosion-resistance and dust-proofing properties.

  CAD ：

  2D / 3D

  Standard Price:	SGD 115.17-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Square-Flanged Unit With Spigot Joint UCFS

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing with a bearing box with a square flange and a spigot joint on the mounting surface

  CAD ：

  2D / 3D

  Standard Price:	SGD 167.63-
  Days to Ship:	6 Day(s) or more

• 

  Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

  ASAHI SEIKO

  Pillow-type unit UCP200-type bearing box with raised center height.

  Standard Price:	SGD 25.68-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Pillow Block Unit BLP

  NIPPON PILLOW BLOCK

  [Features]Pillow block unit designed for weight reduction. ·With set screws. Suitable for light to normal loads in limited spaces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.31-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Take-Up Unit UCT

  NIPPON PILLOW BLOCK

  · UCT is a unit that combines a bearing box fitted with a slide groove.
  · The bearing box can be moved along the slide groove in a radial direction to adjust the support position at the shaft center.

  CAD ：

  2D / 3D

  Standard Price:	SGD 21.88-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Diamond-Shaped Flange Type Unit, UCFB

  NIPPON PILLOW BLOCK

  This diamond-shaped bearing box has a flange on just one side, so it is appropriate for applications in small spaces such as machinery sides and vertical surfaces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.21
  Days to Ship:	4 Day(s) or more

• 

  Ball Bearing/Cast Iron/Take-Ups

  MISUMI

  [Features]It can be used for belt and chain adjustments, etc., in areas where free movement of the shaft center is required.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 23.75-
  Days to Ship:	4 Day(s) or more

• 

  Cast Iron Square-Flanged Unit UCF

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing and a housing with a square flange

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.95-
  Days to Ship:	4 Day(s) or more

• 

  [C-VALUE] Ball Bearing Units - Cast Iron, Pillow Blocks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.25-
  Days to Ship:	4 Day(s) or more

Loading...