SMC Other Pneumatic Related Devices（Type：Instrumentation Auxiliary Device）

• 

  Lock-Up Valve IL201/211/220 Series

  SMC

  Lock-Up Valve IL201/211/220 Series.
  [Features]
  · Single acting / double acting: Keeps the operating part in position as an emergency measure until the air source is returned to its normal state.
  · 3-way type: Designed so that the supply port changes if there are any irregularities.
  [Applications]
  · Use when there are air source or air supply piping irregularities in the pneumatic process control lines.

  Days to Ship:	31 Day(s) or more

• 

  Cylinder Positioner IP200 Series

  SMC

  SMC Cylinder Positioner IP200 Series.
  [Features]
  ・ Servo mechanism enables stable and accurate control of cylinder position
  ・ It can also be used for cylinder position control of general industrial machine

  Days to Ship:	31 Day(s) or more

• 

  Booster Relay IL100 Series

  SMC

  [Features]
  · Used when the piping distance from the instrument to the operation part is very long or when the capacity of the operation part is large.
  · Drive speed of the operation part has been greatly improved.

  Days to Ship:	31 Day(s) or more

• 

  ATEX Directive Cylinder Positioner 56-IP200/56-IP210 Series, ATEX Category 3

  SMC

  [What is the ATEX Directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  All equipment within the scope of the Directive must bear the CE marking and comply with the directive's requirements. ATEX Directive incorporates conventional European standards for explosion-proof equipment.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  · Prevention of static charge
  · Prevention of spark ignition caused by friction, impact, and abrasion
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone/Category
  The ATEX classifies the applicable equipment used in respective hazardous areas (zones) into the categories.
  · Zone 0: Category 1
  A place in which an explosive atmosphere may occur is (zone): present continually or for a long time, > 1,000 hours/year
  · Zone 1: Category 2
  A place in which an explosive atmosphere may occur is (zone): present occasionally or 10 to 1,000 hours/year
  · Zone 2: Category 3
  A place in which an explosive atmosphere may occur is (zone): less likely present or for a short time < 10 hours/year

  Days to Ship:	Quote

Loading...