NITTOKOHKI Couplers, One-Touch Joints（Body Material：Steel）

• 

  Hi Cupla, Small Bore, Steel, PM Type

  NITTOKOHKI

  [Features]
  · With a wide range of materials, sizes, and mounting shapes, catering needs for application from air piping in factories to connecting air tools.
  ·, Excellent durability and environment characteristics.
  · Excellent coupler with wide application from air piping in factories to connecting air tools.
  · Use air for steel and water for brass and stainless steel.
  · However, please note fluid flows out on the plug side at separation.
  · Improved strength for critical steel parts with heat treatment.
  · Superior especially in abrasion resistance and durability.
  · Abundant variety of main body materials, sizes and mounting shapes are standardized for use in a wide range of pneumatic applications.
  · Heat treatment is carried out on important parts (Steel).
  · Can be connected to High Coupler 200, nut coupler, nut coupler 200, line coupler, etc.
  · Built-in automatic opening and closing valve.
  · A variety of steel, brass, stainless steel, and main body materials.
  · Abundant variety of sizes and mounting shapes.

  CAD ：

  2D

  Standard Price:	SGD 3.15-
  Days to Ship:	Same day or more

• 

  HSP Cupla, Steel, NBR, HP Type

  NITTOKOHKI

  [Features]
  · Main body uses special steel with strong vibration/impact resistance.
  · Both male and female thread types available. Works with hydraulic equipment and has low levels of pressure loss.
  · Main coupler unit uses heat-treated special steel.
  · Effective especially for shock resistance against impulse pressure.
  · Prevents fluid out of flow at separation with the equipped automatic opening and closing valve on both socket and plug.
  · Moreover, this is easy to handle.
  · In addition to the female screw types, male screw types (taper screw, parallel screw male sheet, and parallel screw female sheet) are available.
  ▪ The male screw type is particularly effective for carrying out installation on hydraulic equipment.
  ▪ Parallel screw type can support both metal seal or O-ring seal. (O-ring used is commercially available) HSP-DC coupler is separately used for application of diecast machine where pressure variation is severe.
  ▪ Length of male type screw becomes smaller compared with the overall length when male type conversion nipple (commercially available) is mounted in female type screw.
  ▪ As for 2HS to 8HS type (excluding 66HS) of socket for mounting the male screw, PL type with stopper is separately available.

  CAD ：

  2D

  Standard Price:	SGD 26.20-
  Days to Ship:	3 Day(s) or more

• 

  Hi Cupla, Small Bore, Steel, NBR, SH Type

  NITTOKOHKI

  A coupler with a superior track record internationally with its Nitto Kohki High Coupler small-diameter steel NBR SH function.
  • Materials: brass, nitrile rubber
  • Connection type: For external thread mounting
  • Type: Standard.

  CAD ：

  2D

  Standard Price:	SGD 10.70-
  Days to Ship:	3 Day(s)

• 

  Hyper HSP Cupla, Steel, NBR, HP Type

  NITTOKOHKI

  A purge function eliminates troublesome residual-pressure processing during connection work. Streamlines frequent connection tasks in hydraulic piping.

  CAD ：

  2D

  Standard Price:	SGD 40.80-
  Days to Ship:	8 Day(s)

• 

  TSP Coupler - Steel - NBR - TSH Type

  NITTOKOHKI

  This coupler has a superior track record internationally with its Nitto Kohki TSP Coupler steel NBR TSH shape.
  • Materials: brass, nitrile rubber
  • Connection type: For hose mounting
  • Type: Standard.

  CAD ：

  2D

  Standard Price:	SGD 30.70-
  Days to Ship:	3 Day(s) or more

• 

  Multi Coupler, MALC-HSP, Steel, Screw Type Socket for High Pressure

  NITTOKOHKI

  A multi-coupler which achieves high flow rate / high allowable eccentricity / liquid stagnation thanks to its special valve shape. Optimal for high pressure systems that use cylinders for connection and disconnection to multiple pipe lines.
  
  [Features]
  · Compared with conventional multi-couplers, an almost doubled high flow rate is provided.
  · Installation plate is devoted to space saving. (*The rate of increase of the flow rate differs according to size.)
  · For conventional multi-couplers, allowable eccentricity is limited to ⌀0.6 mm, but the new MALC type succeeds in expanding the eccentricity range to up to ⌀2 mm.
  · Special valve shape enables pressurized connection up to 8 MPa.
  · Uniform dimension of 30 mm between plates when connecting at full size; mounting of any size to the same plate is feasible.
  · Liquid stagnation reduction valve structure.

  CAD ：

  2D

  Standard Price:	SGD 313.00-
  Days to Ship:	8 Day(s)

• 

  Hyper HSP Coupler, Steel, NBR HS Type

  NITTOKOHKI

  A purge function eliminates troublesome residual-pressure processing during connection work. Streamlines frequent connection tasks in hydraulic piping.

  CAD ：

  2D

  Standard Price:	SGD 91.10-
  Days to Ship:	8 Day(s)

• 

  HSP Cupla, Steel, NBR, HS Type

  NITTOKOHKI

  [Features]
  · The main body employs a special kind of steel having strong vibration/impact resistance.
  Both male and female thread types available. Additionally, low pressure loss makes it suitable for hydraulic equipment.
  · The main coupler unit uses heat-treated special steel.
  · Effective especially for shock resistance against impulse pressure.
  · Prevents fluid outflow at separation with the equipped automatic opening and closing valve on both the socket and plug.
  · Moreover, handling is made easy.
  · In addition to female thread types, male thread types (taper thread, parallel thread male seat, and parallel thread female seat) are available.
  · Efficiency has been increased for mounting work to hydraulic equipment for male thread types in particular.
  · Metal and O-ring seals for parallel male types are available as well (commercially available O-ring used).
  · For demanding die-casting machine use with heavy pressure fluctuations, an HSP-DC coupler is available separately.
  · The length of the male type screw becomes smaller relative to the overall length when a male type conversion nipple (commercially-available) is mounted in a female type screw.
  ▪ For the 2HS - 8HS (excluding the 66 HS) socket types for mounting of male screws, a PL type with stopper is available separately.

  CAD ：

  2D

  Standard Price:	SGD 61.90-
  Days to Ship:	3 Day(s) or more

• 

  HSP Cupla, Steel, NBR HS-R

  NITTOKOHKI

  [Features]
  · The main body uses special steel having strong vibration/impact resistance.
  · Both male and female thread types available. Works with hydraulic equipment and has low levels of pressure loss.
  · The main coupler unit uses heat-treated special steel.
  · Effective especially for shock resistance against impulse pressure.
  · Prevents fluid out of flow at separation with the equipped automatic opening and closing valve on both socket and plug.
  · Moreover, handling is easy.
  · In addition to female screw types, male screw types (taper screw, parallel screw male sheet, and parallel screw female sheet) are available.
  ▪ The male screw type is particularly effective for installation on hydraulic equipment.
  ▪ Parallel screw type can support either metal seal or O-ring seal (for the O-ring, use a commercially available part).
  ▪ HSP-DC coupler is separately used for application of diecast machine where pressure variation is severe.
  ▪ Length of the male type screw becomes smaller compared to the overall length when male type conversion nipple (commercially available) is mounted in female type screw.
  ▪ As for 2HS to 8HS type (excluding 66HS) of socket for mounting the male screw, PL type with stopper is separately available.

  CAD ：

  2D

  Standard Price:	SGD 71.40-
  Days to Ship:	8 Day(s)

• 

  450B Coupler, Steel, Plug

  NITTOKOHKI

  Valve is metal touch type for superior durability. Secure and reliable with sleeve and stopper mechanism.

  CAD ：

  2D

  Standard Price:	SGD 58.90
  Days to Ship:	3 Day(s)

• 

  SP Coupler Type A, Steel, NBR Socket, Female Thread

  NITTOKOHKI

  [Features]
  · "SP coupler" high flow rate type
  · Higher flow rate: Flow rate is higher by 7 to 64% compared to the conventional "SP coupler."
  · Center automatic return PAT of valve: Shape of the coupler built-in valve has undergone renewal.
  · After separation, the valve is automatically reset to ensure stable sealing in the unit state (1 to 8SP-A types).
  · Smooth connection: More comfortable connecting operation with socket due to smooth shape on plug tip.
  · Compatibility: Supports existing SP couplers as well, use as needed.
  ▪ Flow rate property: Even if the main body material is different, the flow rate characteristics are the same.
  · The main body material can be chosen according to usage.
  · Snap-stopper (sold separately): Allows you to prevent inadvertent withdrawal after connection, improving mounting performance of the simple stopper.
  · A new main body shape enables secure lock.
  · Green procurement compliant product: Nickel plating is used in surface treatment of the steel body.
  ▪ We strive to reduce the environmental load.

  CAD ：

  2D

  Standard Price:	SGD 49.40-
  Days to Ship:	8 Day(s)

• 

  Nut Cupla, Steel, PN Type (for Urethane Hose Mounting)

  NITTOKOHKI

  A steel Nut Cupla for low pressure for easy and secure attachment of urethane hoses.
  A hose can be attached without a hose clamp.
  Available for braided hose installation.
  [Features]
  ·A series of Hi Cupla type and Hi Cupla 200 type.
  ·To attach it to the hose, simply insert it into the nipple and tighten the nut.
  ·The outer circumference of the hose is tightened, making it difficult for the hose to come loose or the fluid to flow out.
  ·There is also a "Rotary Nut Cupla" that uses a ball bearing swivel mechanism to prevent the hose from twisting and reduce the burden on your hands.
  · * Please select a hose suitable for the fluid used.
  [Applications]
  ·For attaching urethane hoses.

  CAD ：

  2D

  Standard Price:	SGD 7.05-
  Days to Ship:	Same day or more

• 

  Hi Cupla 200, Steel, SM Type (for Female Thread Mounting)

  NITTOKOHKI

  [Features]
  · Easily and reliably connected with single-touch operation.
  · High flow rate type.
  · Edge packing system is used.
  · Excellent operability is achieved.
  · Single-touch connection of a plug and socket by just pushing in.
  · Valve structure with small pressure losses is used.
  · Higher flow rate (15% higher compared by manufacturer).
  · End surface packing method has been adopted for sealing at the time of connection.
  · The connection load is low and removal performance is increased still more.
  · Compared with outer O-ring designs, this product is not prone to packing damage due to lack of grease, and offers excellent usability.
  · Not usable in water or oil because the main body is available only in steel.
  ▪ Also available with tube fitter.

  CAD ：

  2D

  Standard Price:	SGD 16.10-
  Days to Ship:	3 Day(s)

• 

  Hi Cupla, Small Bore, Steel, PH Type

  NITTOKOHKI

  [Features]
  · With a wide range of materials, sizes, and mounting shapes, catering needs for application from air piping in factories to connecting air tools.
  ·, Excellent durability and environment characteristics.
  · Excellent coupler with wide application from air piping in factories to connecting air tools.
  · Use air for steel and water for brass and stainless steel.
  · However, please note fluid flows out on the plug side at separation.
  · Improved strength for critical steel parts with heat treatment.
  · Superior especially in abrasion resistance and durability.
  · Abundant variety of main body materials, sizes and mounting shapes are standardized for use in a wide range of pneumatic applications.
  · Heat treatment is carried out on important parts (Steel).
  · Can be connected to High Coupler 200, nut coupler, nut coupler 200, line coupler, etc.
  · Built-in automatic opening and closing valve.
  · A variety of steel, brass, stainless steel, and main body materials.
  · Abundant variety of sizes and mounting shapes.

  CAD ：

  2D

  Standard Price:	SGD 4.00-
  Days to Ship:	3 Day(s)

• 

  Flat Face Cupla, F35 Type, Steel, FKM, Plug (for Male Thread Mounting)

  NITTOKOHKI

  The flat contact face design makes it easy to clean dust. Reduces "dripping" at the time of coupler separation by 50% or more.
  
  [Features]
  • Unique flat connection structure reduces "dripping" by 50% or more at the time of coupler separation.
  • By reducing air mixing when a connection is made, adverse effects on equipment can be reduced.
  • Easy handling of foreign matter, dust, etc.
  • Single-touch connection of the plug and socket via simple push-in mechanism.
  • To prevent separation due to vibrations and shocks when connection is made, sleeve and lock mechanisms are included.
  • Structure allows only minimal pressure loss, and is thus particularly well-suited to hydraulic applications that require a high flow rate.
  • Furthermore, built-in automatic opening and closing valves on both the socket and plug,

  CAD ：

  2D

  Standard Price:	SGD 85.10-
  Days to Ship:	8 Day(s) or more

• 

  Nut Cupla, Steel, SN Type (for Urethane Hose Mounting)

  NITTOKOHKI

  A hose can be attached without a hose clamp. With a spring nut, there is no need to worry about the hose breaking. The type for fitting braided hose is also available.
  [Features]
  ·A series of Hi Cupla type and Hi Cupla 200 type. Cupla with a spring nut is also available to prevent the hose from breaking.
  ·To attach it to the hose, simply insert it into the nipple and tighten the nut.
  ·The outer circumference of the hose is tightened, making it difficult for the hose to come loose or the fluid to flow out.
  ·There is also a "Rotary Nut Cupla" that uses a ball bearing swivel mechanism to prevent the hose from twisting and reduce the burden on your hands.
  [Applications]
  ·For attaching urethane hoses.

  CAD ：

  2D

  Standard Price:	SGD 18.80-
  Days to Ship:	3 Day(s) or more

• 

  High Coupler BL, Stainless Steel, SH-Type

  NITTOKOHKI

  Easy to lock securely by just turning the sleeve after coupler connection.

  CAD ：

  2D

  Standard Price:	SGD 18.90-
  Days to Ship:	3 Day(s)

• 

  Flat Face Coupler FF-Type, Steel NBR Socket

  NITTOKOHKI

  Flow is increased up as much as 2 fold. Enables high flow rate with a drip reduction valve.
  
  [Features]
  • Unique flat connection structure reduces "dripping" to half or less when separated from coupler.
  • Reduces impact on equipment by reducing air mixing during connection.
  • Easy processing of foreign matter, dust, etc.
  • Single-touch connection of plug and socket by just pushing.
  • Includes a sleeve and lock mechanism as a countermeasure to prevent separation due to vibrations and shocks during connection.
  • A structure that minimizes pressure loss is particularly appropriate for hydraulic applications that require flow rate.
  • It also prevents fluid outflow during separation by using a built-in automatic opening and closing valve on both socket and plug.

  CAD ：

  2D

  Standard Price:	SGD 438.90-
  Days to Ship:	8 Day(s)

• 

  HSP Coupler, Steel, NBR HS-PL

  NITTOKOHKI

  The main body employs a special kind of steel having strong vibration/impact resistance. Additionally, low pressure loss makes it suitable for hydraulic equipment.
  
  [Features]
  · The main coupler unit uses heat-treated special steel.
  · Effective especially for shock resistance against impulse pressure.
  · Prevents fluid outflow at separation with the equipped automatic opening and closing valve on both the socket and plug.
  · Moreover, handling is made easy.
  · In addition to female thread types, male thread types (taper thread, parallel thread male seat, and parallel thread female seat) are available.
  · Efficiency has been increased for mounting work to hydraulic equipment for male thread types in particular.
  · There are metal and O-ring seals for parallel male types as well.

  CAD ：

  2D

  Standard Price:	SGD 74.20-
  Days to Ship:	4 Day(s) or more

• 

  Hi Cupla, Small Bore, Steel, NBR, PC Type

  NITTOKOHKI

  Available in a variety of main body materials, sizes, and mount shapes depending on the application.

  CAD ：

  2D

  Standard Price:	SGD 15.40-
  Days to Ship:	8 Day(s)

• 

  210 Coupler, with NBR Socket, Steel

  NITTOKOHKI

  [Features]
  · A popular hydraulic coupler with a maximum operating pressure of 20.6 MPa (210 kgf/cm2).
  · Optimal for hydraulic equipment with minimal pressure loss.
  · Particularly suited to hydraulic applications that require high flow rates due to its minimal pressure loss structure.
  · Prevents outflow of fluid when separated by the automatic opening and closing valves incorporated into the socket and plug.
  · Easy to handle.

  CAD ：

  2D

  Standard Price:	SGD 67.70-
  Days to Ship:	8 Day(s)

• 

  Hi Cupla 200, Steel, SC Type (for Mounting Tubes)

  NITTOKOHKI

  [Features]
  · Easily and reliably connected with single-touch operation.
  · High flow rate type.
  · Edge packing system is used.
  · Excellent operability is achieved.
  · Single-touch connection of a plug and socket by just pushing in.
  · Valve structure with small pressure loss is used.
  · Higher flow rate (15% up in manufacturer comparisons).
  · End surface packing method has been adopted for sealing at time of connection.
  · Connection load is low and removal performance has increased further.
  · Compared with outer O-ring designs, this product is not prone to packing damage due to lack of grease, and offers excellent usability.
  · Not usable in water or oil because the main body is available only in steel.
  ▪ Also available with tube fitter.

  CAD ：

  2D

  Standard Price:	SGD 29.50-
  Days to Ship:	8 Day(s)

• 

  Hi Cupla, Small Bore, Steel, NBR, SF Type

  NITTOKOHKI

  This coupler has a superior track record internationally with its Nitto Kohki High Coupler small-diameter steel NBR SF function.
  • Materials: brass, nitrile rubber
  • Connection type: For external thread mounting
  • Type: Standard.

  CAD ：

  2D

  Standard Price:	SGD 10.20-
  Days to Ship:	3 Day(s)

• 

  Rotary Plug, Steel, PM Type

  NITTOKOHKI

  Rotary function with 360゜ swing rotation. Much lighter and smaller than conventional products.
  
  [Features]
  · Swing plug for connecting pneumatic equipment and machinery hoses.
  · The main body includes a 45゜ angle to relieve excessive loads that are transferred from the hose.
  · Compact design achieved by simplifying the main body structure in order to increase productivity.
  · Much lighter and smaller than conventional products.
  · Durability is further increased by a new design that takes into account dust resistance.
  · For connecting pneumatic equipment such as air sanders, etc.

  CAD ：

  2D

  Standard Price:	SGD 20.00-
  Days to Ship:	3 Day(s)

• 

  HSP Cupla, Steel, NBR, HP-R Type

  NITTOKOHKI

  [Features]
  · Main body uses special steel with strong vibration/impact resistance.
  · Both male and female thread types available. Works with hydraulic equipment and has low levels of pressure loss.
  · Main coupler unit uses heat-treated special steel.
  · Effective especially for shock resistance against impulse pressure.
  · Prevents fluid out of flow at separation with the equipped automatic opening and closing valve on both socket and plug.
  · Moreover, this is easy to handle.
  · In addition to the female screw types, male screw types (taper screw, parallel screw male sheet, and parallel screw female sheet) are available.
  ▪ The male screw type is particularly effective for carrying out installation on hydraulic equipment.
  ▪ Parallel screw type can support both metal seal or O-ring seal. (O-ring used is commercially available) HSP-DC coupler is separately used for application of diecast machine where pressure variation is severe.
  ▪ Length of male type screw becomes smaller compared with the overall length when male type conversion nipple (commercially available) is mounted in female type screw.
  ▪ As for 2HS to 8HS type (excluding 66HS) of socket for mounting the male screw, PL type with stopper is separately available.

  CAD ：

  2D

  Standard Price:	SGD 44.80-
  Days to Ship:	8 Day(s)

• 

  SP Coupler Type A, Steel, NBR Plug, Female Thread

  NITTOKOHKI

  [Features]
  ▪ Flow rate achieved an increase of 7 to 64% over the conventional "SP coupler."
  ▪The shape of the coupler built-in valve has been given a renewal. After separation, the valve is automatically reset to ensure stable sealing in the unit state (1 to 8SP-A types).
  ▪ More comfortable connecting operation with socket, due to the smooth plug tip shape.
  ▪Standardized to SUS304 stainless steel. It has high reliability with respect to various fluids.
  ▪Since it supports conventional SP couplers, use as necessary.
  ▪Even though body material is different, the flow rate characteristics are the same. You can choose the body material according to usage.
  ▪Unintentional removal after connection can be prevented. Simple stopper mounting capability has been added. A new main body shape enables secure locking.
  ▪The steel body surface is plated with nickel. Every effort is being taken to reduce the environmental load.

  CAD ：

  2D

  Standard Price:	SGD 24.80-
  Days to Ship:	8 Day(s)

• 

  TSP Coupler, TSM Type, NBR, Steel

  NITTOKOHKI

  A coupler with a valveless structure that can be used in a wide variety of applications and situations.
  This product has a valveless structure so that it is suitable high-viscosity fluids.
  A wide variety of main body materials, sizes, and mounting shapes.
  Available for braided hose installation.
  [Features]
  ·The valve-less structure greatly reduces pressure loss and provides a large flow rate.
  ·Suitable for fluids with high viscosity (e.g. grease).
  ·A variety of main body materials, sizes, and mounting shapes are standardized to meet a wide range of applications and situations.

  CAD ：

  2D

  Standard Price:	SGD 29.20-
  Days to Ship:	8 Day(s)

• 

  TSP Cupla,Steel, TPF Type

  NITTOKOHKI

  [Features]
  · Adapts to high viscosity fluids thanks to the valveless structure.
  · A variety of body materials, sizes and mounting shapes.
  · Type for mounting of blade hose also available.
  · Valveless structure greatly reduces pressure loss and realizes large flow rate.
  · Appropriate for fluid with high viscosity (grease, etc.).
  · Various main body materials, sizes and mounting shapes available as standard options to support wide range of applications and situations.
  · Blade hose can be installed without hose band (TPN type/TSN type).

  CAD ：

  2D

  Standard Price:	SGD 13.70-
  Days to Ship:	8 Day(s)

• 

  Hi Cupla, Small Bore, Steel, NBR SM Type

  NITTOKOHKI

  [Features]
  · With a wide range of materials, sizes, and mounting shapes, catering needs for application from air piping in factories to connecting air tools.
  ·, Excellent durability and environment characteristics.
  · Excellent coupler with wide application from air piping in factories to connecting air tools.
  · Use air for steel and water for brass and stainless steel.
  · However, please note fluid flows out on the plug side at separation.
  · Improved strength for critical steel parts with heat treatment.
  · Superior especially in abrasion resistance and durability.
  · Abundant variety of main body materials, sizes and mounting shapes are standardized for use in a wide range of pneumatic applications.
  · Heat treatment is carried out on important parts (Steel).
  · Can be connected to High Coupler 200, nut coupler, nut coupler 200, line coupler, etc.
  · Built-in automatic opening and closing valve.
  · A variety of steel, brass, stainless steel, and main body materials.
  · Abundant variety of sizes and mounting shapes.

  CAD ：

  2D

  Standard Price:	SGD 10.50-
  Days to Ship:	Same day or more

• 

  Multi Cupla, MALC-HSP Type, Steel (High Pressure Screw Fixed Type) Plug

  NITTOKOHKI

  A Multi Coupler that achieves high flow rate and high allowable eccentricity/dripping due to its special valve shape. Optimal for high pressure systems that use cylinders to connect and disconnect to multiple pipe lines.

  CAD ：

  2D

  Standard Price:	SGD 176.90-
  Days to Ship:	8 Day(s)

• 

  Super Cupla, Plug, PM Type (for Female Thread Connections)

  NITTOKOHKI

  [Features]
  · Lightweight design makes the best match with handheld tools.
  · Excellent operability through single-touch connection.
  · Lightweight design suitable for connection with handheld tools.
  · Some main body material is made with aluminum to reduce weight.
  · Single-touch connection of a plug and socket by just pushing in.
  · All handle shapes are standardized for use in a wide range of pneumatic applications.
  · Moreover, the 02S20P type can be connected with a High Coupler socket (10, 17, 20, 30, and 40 types).
  ▪ Also available with tube fitter.
  ▪ Can be connected to the mold coupler (K-01 SP/K-02 SP/K-03 SP type).
  ▪ Single touch connection (with automatic opening and closing valve).
  · Small type with sleeve outer diameter of 19.5 mm.
  ▪ Lightweight body material (Aluminum is used for some part).
  ▪ Abundant variety of mounting shapes.

  CAD ：

  2D

  Standard Price:	SGD 5.50-
  Days to Ship:	3 Day(s)

• 

  Hi Cupla 200, Steel, SF Type (for Male Thread Mounting)

  NITTOKOHKI

  [Features]
  · Easily and reliably connected with single-touch operation.
  · High flow rate type.
  · Edge packing system is used.
  · Excellent operability is achieved.
  · Single-touch connection of a plug and socket by just pushing in.
  · Valve structure with small pressure losses is used.
  · Higher flow rate (15% higher compared by manufacturer).
  · End surface packing method has been adopted for sealing at the time of connection.
  · The connection load is low and removal performance is increased still more.
  · Compared with outer O-ring designs, this product is not prone to packing damage due to lack of grease, and offers excellent usability.
  · Not usable in water or oil because the main body is available only in steel.
  ▪ Also available with tube fitter.

  CAD ：

  2D

  Standard Price:	SGD 14.80-
  Days to Ship:	3 Day(s)

• 

  Flat Face Coupler FF Type, Steel, NBR, Plug

  NITTOKOHKI

  Up to twice the flow rate. Achieves a large flow rate via use of a dripping reduction valve
  
  [Features]
  • Achieves flow rate that is 1.5 to 2 times that of conventional hydraulic couplers such as the "350 coupler" and "flat face coupler F35 model" used for 35 MPa applications.
  • *Flow rate increase differs according to size.
  • Adopts a "dripping reduction valve structure" that minimizes "aeration," with almost no "dripping."
  • Suitable for a hydraulic circuit with pressure fluctuations at high pressure, such as a die cast machine, etc.
  • Single-touch connection of the plug and socket via simple push-in mechanism.
  • Sleeve block function that prevents inadvertent separation due to vibration or shock during connection is standard and workability

  CAD ：

  2D

  Standard Price:	SGD 228.60-
  Days to Ship:	8 Day(s)

• 

  350 Cupla, Steel, Socket (For Male Thread Mounting)

  NITTOKOHKI

  "Drip reducing valve structure" drastically reduces the amount of intruding air and dripping during connection and disconnection. Optimal for hydraulic circuits with large pressure variations.

  CAD ：

  2D

  Standard Price:	SGD 155.80-
  Days to Ship:	3 Day(s) or more

• 

  350 Cupla, Steel, Plug (For Male Thread Mounting)

  NITTOKOHKI

  The "drip reduction valve structure" drastically reduces the amount of air infiltration and the amount of dripping during connection and disconnection. Optimal for hydraulic circuits with large pressure variations.

  CAD ：

  2D

  Standard Price:	SGD 85.00-
  Days to Ship:	3 Day(s) or more

• 

  HSP Coupler, Steel, NBR, HS-GS Type

  NITTOKOHKI

  The main body utilizes a special steel for strong vibration/impact resistance. Small pressure losses also make it suitable for hydraulic equipment.

  CAD ：

  2D

  Standard Price:	SGD 73.00-
  Days to Ship:	8 Day(s)

• 

  TSP Cupla, Steel, NBR, TSF Type (for Male Thread Mounting)

  NITTOKOHKI

  [Features]
  · Adapts to high viscosity fluids thanks to the valveless structure.
  · A variety of body materials, sizes and mounting shapes.
  · Type for mounting of blade hose also available.
  · Valveless structure greatly reduces pressure loss and realizes large flow rate.
  · Appropriate for fluid with high viscosity (grease, etc.).
  · Various main body materials, sizes and mounting shapes available as standard options to support wide range of applications and situations.
  · Blade hose can be installed without hose band (TPN type/TSN type).

  CAD ：

  2D

  Standard Price:	SGD 27.90-
  Days to Ship:	8 Day(s)

• 

  TSP Cupla, Steel TPM Type

  NITTOKOHKI

  [Features]
  · Adapts to high viscosity fluids thanks to the valveless structure.
  · A variety of body materials, sizes and mounting shapes.
  · Type for mounting of blade hose also available.
  · Valveless structure greatly reduces pressure loss and realizes large flow rate.
  · Appropriate for fluid with high viscosity (grease, etc.).
  · Various main body materials, sizes and mounting shapes available as standard options to support wide range of applications and situations.
  · Blade hose can be installed without hose band (TPN type/TSN type).

  CAD ：

  2D

  Standard Price:	SGD 14.10-
  Days to Ship:	8 Day(s)

• 

  High Coupler Large-Diameter Steel NBR SF Type

  NITTOKOHKI

  This coupler has a superior track record internationally with its Nitto Kohki High Coupler large-diameter steel NBR SF type.
  • Materials: brass, nitrile rubber
  • Connection type: For hose mounting
  • Type: Standard.

  CAD ：

  2D

  Standard Price:	SGD 35.60-
  Days to Ship:	3 Day(s)

• 

  Hi Cupla Large Bore, Plug PH Type (for Hose Mounting)

  NITTOKOHKI

  [Features]
  · With a wide range of materials, sizes, and mounting shapes, catering needs for application from air piping in factories to connecting air tools.
  ·, Excellent durability and environment characteristics.
  · Excellent coupler with wide application from air piping in factories to connecting air tools.
  · Use air for steel and water for brass and stainless steel.
  · However, please note fluid flows out on the plug side at separation.
  · Improved strength for critical steel parts with heat treatment.
  · Superior especially in abrasion resistance and durability.
  · Abundant variety of main body materials, sizes and mounting shapes are standardized for use in a wide range of pneumatic applications.
  · Heat treatment is carried out on important parts (Steel).
  · Can be connected to High Coupler 200, nut coupler, nut coupler 200, line coupler, etc.
  · Built-in automatic opening and closing valve.
  · A variety of steel, brass, stainless steel, and main body materials.
  · Abundant variety of sizes and mounting shapes.

  CAD ：

  2D

  Standard Price:	SGD 10.80-
  Days to Ship:	3 Day(s)

• 

  Rotary Type Line Cupla, Steel Socket, for 3-Branch Piping

  NITTOKOHKI

  This coupler has a superior track record internationally with its Nitto Kohki Rotary type line coupler for 3-branch steel pipe.
  • Materials: brass, nitrile rubber
  • Connection type: For internal thread mounting
  • Type: Standard, branch

  CAD ：

  2D

  Standard Price:	SGD 167.40
  Days to Ship:	3 Day(s)

• 

  Rotary Plug, Steel, PFF, 20PFF

  NITTOKOHKI

  Rotary function provides 360° rotation. Significantly lighter and smaller than conventional parts.

  CAD ：

  2D

  Standard Price:	SGD 17.00
  Days to Ship:	8 Day(s)

• 

  Multi- Coupler, MALC-HCP, Steel Flange for High Pressure, Socket

  NITTOKOHKI

  A multi-coupler which achieves high flow rate / high allowable eccentricity / liquid stagnation thanks to its special valve shape. Optimal for high pressure systems that use cylinders for connection and disconnection to multiple pipe lines.
  
  [Features]
  · Compared with conventional multi-couplers, an almost doubled high flow rate is provided.
  · Installation plate is devoted to space saving. (*The rate of increase of the flow rate differs according to size.)
  · For conventional multi-couplers, allowable eccentricity is limited to ⌀0.6 mm, but the new MALC type succeeds in expanding the eccentricity range to up to ⌀2 mm.
  · Special valve shape enables pressurized connection up to 8 MPa.
  · Uniform dimension of 30 mm between plates when connecting at full size; mounting of any size to the same plate is feasible.
  · Use of a liquid stagnation reduction valve structure enables reduction of liquid stagnation and air intrusion.
  · Phosphorus electroless nickel plating is used as a surface treatment for the internal parts of bodies made of specialized steel.
  We work hard to reduce the burden on the environment imposed by our products.

  CAD ：

  2D

  Standard Price:	SGD 352.80-
  Days to Ship:	8 Day(s)

• 

  210 Coupler, Steel, NBR Plug

  NITTOKOHKI

  [Features]
  · Common hydraulic coupler with max operating pressure of 20.6MPa {210kgf/cm2}.
  · Small pressure loss makes it also suitable for hydraulic equipment.
  · Common hydraulic coupler with max operating pressure of 20.6 MPa.
  · Particularly appropriate for hydraulic applications that demand a high flow rate thanks to a structure which causes very small pressure loss.
  · Prevents outflow out fluid during separation with a built-in automatic opening and closing valve on both the socket and plug.
  · Removal is easy.

  CAD ：

  2D

  Standard Price:	SGD 38.90-
  Days to Ship:	8 Day(s)

• 

  450B Coupler, Steel, Socket

  NITTOKOHKI

  Valve is metal touch type for superior durability. Secure and reliable with sleeve and stopper mechanism.

  CAD ：

  2D

  Standard Price:	SGD 99.80
  Days to Ship:	3 Day(s)

Loading...