MISUMI Locating Pins（Material：Steel）

• 

  Locating Pins - Tip Shape Selectable (Straight Tapped)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
  - The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
  - The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Small Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to both the tolerance m6 and p6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to tolerance p6 only.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Small Diameter Locating Pin - Straight / Small Head

  MISUMI

  - Small Diameter Locating Pin - Straight / Small Head from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
  - The outer diameter of the locating pin can be configurable up to 3 mm.
  - SUS304 may not be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Full Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Full Threaded) from MISUMI.
  - Screw-fitting type without pilot. Costs for hole machining on fixtures can be reduced.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 3 options for alteration, Wrench flat, Wrench hole (φ3.5 mm) or Hex socket machining.
  - Any alteration cannot be combined with the other alteration.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Threaded)

  MISUMI

  - Locating Pins - tip shape selectable (Threaded) from MISUMI.
  - Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - A fully threaded type of L=0 without pivot is also available.
  - Polished, centering hole is may not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Eccentric

  MISUMI

  Locating Pins used when the hole location differs in the mounting area and the locating area.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 6.78-
  Days to Ship:	Same day or more

• 

  Locating Pins - Straight, Sphere (Tapped)

  MISUMI

  - Locating Pins - Straight, Sphere (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Sphere Large Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Marker Pins - Hexagon Socket Type

  MISUMI

  - Marker Pins - Hexagon Socket Type from MISUMI.
  - Hex hole enables easy mounting with a hex wrench.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - The pin with small thread diameter has thin under-head part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Locating Pins - Large Head, Tapered (Tapped)

  MISUMI

  - Locating Pins - Large Head, Tapered (Tapped) from MISUMI.
  - Large Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Air Vent (Tapped)

  MISUMI

  - Locating Pins - Air Vent (Tapped) from MISUMI.
  - Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
  - The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
  - Mounting method can be selected 2 types, Thread or Tapped.
  - The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
  - The tolerance of outer diameter is g6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 1.94-
  Days to Ship:	Same day or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Threaded

  MISUMI

  - Locating Pins - Large Head, Bullet Nose, Compact – Threaded from MISUMI.
  - R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.
  - Polished, centering hole is may not be on all SUS304 Pins.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Air Vent (Threaded)

  MISUMI

  [Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 3.76-
  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Small Head, Tapered (Tapped)

  MISUMI

  - Locating Pins - Small Head, Tapered (Tapped) from MISUMI.
  - Small Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Large Head, Tapered (Threaded)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Press Fit)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Press Fit) from MISUMI.
  - The tip shape is selectable from three types, Tapered (A), Taper R (B), Spherical (C). Highly customizable with each dimension configurable. Press Fit.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Marker Pins - with Flathead Slot

  MISUMI

  - Marker Pins - with Flathead Slot, JPLB / JPLBK / JPLBM / JPLBS series from MISUMI.
  - Have the Flathead Slot provided and thus, can be mounted easily by using the screwdriver.
  - The material of marker pin can be selected 2 types, Steel S45C Equivalent, Stainless Steel SUS304.
  - SUS304 type marker pins may not be polished and may have no centering hole.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Height Adjusting Pins - Counterbored

  MISUMI

  - Height Adjusting Pins – Counterbored from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Press Fit)

  MISUMI

  - Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Flat Head (Press Fit)

  MISUMI

  Flat Head Type. Suitable if the mating side has limited space.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Threaded

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Threaded from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - The material of pin can be selected 2 types, SK95 (SK4) Equivalent and SUS304.
  - The hardness of steel pin is 50～58HRC.
  - SUS304 may not be polished.
  - When L=0, an undercut will be added at the neck of the thread.
  - Shaft diameter can be selected up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)

  MISUMI

  [Features]You can freely specify dimensions of shoulder type respective parts. It is attached with a male thread.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact

  MISUMI

  - Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact from MISUMI.
  - Large Head, Tapered. The hollow area is a screw hole. Improved maintainability compared to the press fit type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Press Fit

  MISUMI

  R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.

  CAD ：

  2D / 3D

  Days to Ship:	6 Day(s) or more

• 

  Locating Pins - Large Head, Tapered - Threaded, Hex Socket

  MISUMI

  - Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
  - Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Plate Centering Pins

  MISUMI

  - Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
  - Suitable for centering thin objects.
  - Can be used for attaching gripper.
  - Center holes may disappear depending on dimension B.
  - The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
  - SUS304 Plate Centering Pins may not be polished and may have no centering hole.
  - When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Locating Pins - Screw Mounted

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s)

• 

  Locating Pins - Sphere Large Head (Tapped)

  MISUMI

  - Locating Pins - Sphere Large Head (Tapped) from MISUMI.
  - Sphere Large Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The spherical head may be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Sphere Small Head (Tapped)

  MISUMI

  - Locating Pins - Sphere Small Head (Tapped) from MISUMI.
  - Sphere Small Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The spherical head may be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Press Fit

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Locating Pins - Sphere Small Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Small Flat Head (Tapped)

  MISUMI

  Small Flat Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to the press fit type.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered, Threaded)

  MISUMI

  Shouldered, Press Fit + Lock Nut Type. Improved maintainability compared to Press Fit Type.

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
  - The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - A machining step remains on the shoulder top for Diamond shape.
  

  CAD ：

  2D / 3D

  Days to Ship:	4 Day(s) or more

• 

  Locating Pins - Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - Large Flat Head (Press Fit) from MISUMI.
  - Flat Head Type. Suitable if the mating side has limited space.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polished, centering hole is may not available for SUS304.
  - The material of locating pin can be selected 3 types, SKS3 Equivalent, SUS304, SUS440C or 13Cr stainless.
  - The insertion guide is applicable to tolerance p6 only.
  - The tolerance of locating pin head is h6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Pilot Pins - Tapped

  MISUMI

  [Features]It is inserted and positioned for purposes such as preventing pitch deviation. It is attached with a female thread.

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

• 

  Locating Pins - Pilot

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.39-
  Days to Ship:	3 Day(s) or more

• 

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	5 Day(s) or more

Loading...