(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our operating hours are from 9:00~15:00 during the upcoming Hari Raya Haji Holiday 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Chamfer, V-Grooves（Single blade, two blades：Single blade）
[What is a chamfering tool?]
A tool for chamfering of drill holes, etc., which is used for removing burrs on the hole's surface. There are end mills for chamfering, chamfering cutters, inner radius cutters, etc., depending on the application.
| Days to Ship |
|
|---|
-
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
Standard Price: SGD 22.19- Days to Ship: Same day or more -
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.
Standard Price: SGD 106.91 Days to Ship: 4 Day(s) or more -
- On Sale Till 31/03/2025
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy PositioningStandard Price: SGD 24.86- Special Price Days to Ship: 4 Day(s) or more -
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining style
- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Standard Price: SGD 69.14- Days to Ship: 4 Day(s) or more -
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
- Volume Discount
Standard Price: SGD 80.45- Days to Ship: 4 Day(s) or more -
FUKUDA
End mill for R chamfering.
[Features]
·The use of a straight blade makes it easy to re-grind and has excellent cost performance.
·The shank diameter is designed to be thick, making it rigid.
·A rich lineup from R0.5 to 30.
[Applications]
·Ideal for R chamfering.Standard Price: SGD 82.42- Days to Ship: 4 Day(s) or more -
NT TOOL
For machining non-viscous materials
[Features]
· A wide range of chamfering sizes with one unit.
· Beautiful cut surfaces with zero chatter.
· Easy positioning.
· Uses Cobalt HSSStandard Price: SGD 45.06 Days to Ship: 4 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces
- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 100.74- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
·Ideal for chamfering and V-groove
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 88.80- Days to Ship: 4 Day(s) or more -
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
·Ideal for chamfering (V-groove is not possible as there is no cutting flute on the tip).
·Peripheral flutes enable inclined, contour and helical cutting
·The 3-flute shape enables the feed rate to be improved up to 1.5 times that of the 2-flute type
·With helix angle on the peripheral flutes
·Can also be used as a deburring tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Standard Price: SGD 95.27- Days to Ship: 4 Day(s) or more -
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank
OSG
Leading drill long shank type, using powder metal high-speed steel XPM as the base material, with 90° of the V coated tip angle. Ideal for chamfering deep parts.
Standard Price: SGD 38.35- Days to Ship: 4 Day(s) or more -
Toglon Hard SP 90° ALD Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Standard Price: SGD 102.55- Days to Ship: 8 Day(s) -
CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank
SANDVIK
High performance end mill with high versatility
[Features]
·One end mill for all work materials
·Improved machine operating rate
·Minimize tool inventory
·Safe and predictable tool life
·High flexibility and optimized toolingStandard Price: SGD 123.90- Days to Ship: 8 Day(s) or more -
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
·Ideal for chamfering. Can also be used as a deburring tool
·Since it has peripheral flutes, it is possible to perform inclined, contour, and helical cutting
·Since the peripheral flutes have helix angle, it is possible to process as shown in the above figure
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Standard Price: SGD 65.19- Days to Ship: 4 Day(s) or more -
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
Standard Price: SGD 1,465.10 Days to Ship: 4 Day(s) or more -
Standard Price: SGD 28.03- Days to Ship: 4 Day(s) or more -
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).
Standard Price: SGD 16.11- Days to Ship: 4 Day(s) or more -
UNION TOOL
[Features]
· Carbide spiral chamfering cutter
· Half Taper Angle of 45°
· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.Standard Price: SGD 97.25- Days to Ship: 4 Day(s) or more -
IWATA TOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.Standard Price: SGD 70.20- Days to Ship: 8 Day(s) or more -
Carbide Chamfering Cutter KMC-2
KYOWA SEIKO
[Applications]It can be used for chamfering and horizontal machining. [Features]By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron, and aluminum.
Standard Price: SGD 48.33- Days to Ship: 4 Day(s) or more -
Chamfering Reamer (3-Flute) MC
DAIICHITOOL
[Features]
Chamfering reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.Standard Price: SGD 47.18- Days to Ship: 4 Day(s) or more -
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
·Easy high-quality processing of corner radius
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 60.92- Days to Ship: 4 Day(s) or more -
Carbide inner R-cutter, 2-flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Standard Price: SGD 74.19- Days to Ship: 4 Day(s) or more -
High-Speed Steel Chamfering End Mill, 2-Flute / Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 6 Day(s) or more -
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
XAL Series Carbide Inner Radius Cutter, 2-Flute
- Volume Discount
Standard Price: SGD 51.74- Days to Ship: 4 Day(s) or more -
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill long shank type. Ideal for chamfering deep parts.
Standard Price: SGD 608.87- Days to Ship: 4 Day(s) or more -
Leading Drill, Carbide FX Coating FX-LDS
OSG
90° of the tip angle with FX coating, carbide leading drill. It enables high speed and long lifespan.
Standard Price: SGD 400.56- Days to Ship: 4 Day(s) or more -
3-flute Chamfering Cutter (positive type) HSCT-P
OSG
End mill for positive type chamfering. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
Standard Price: SGD 120.97- Days to Ship: 4 Day(s) or more -
3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N
OSG
Negative type chamfering end mill, long shank type. It suppresses chattering during processing and has good chip removal capability for a beautiful finished surface.
Standard Price: SGD 129.34- Days to Ship: 7 Day(s) or more -
Toglon Sharp SP 60° Carbide DLC Coating
IWATA TOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
Standard Price: SGD 145.90- Days to Ship: 8 Day(s) or more -
Toglon Miniature Hard SP 90° ALT Coating
IWATA TOOL
[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.Standard Price: SGD 107.68- Days to Ship: 14 Day(s) -
ASAHI TOOLS
Brazing shape, angle tolerance ±15'.
Maintaining shape accuracy with a straight cutting edge.
Applications, Hole chamfering/chamfering/horizontal running Work material, General steel/Heat-treated steel/Stainless steel/Cast iron/Aluminum/Copper/Resin
Single-edge blade
2 bladesStandard Price: SGD 149.47- Days to Ship: 4 Day(s) or more -
SVM Chamfering Mill, Non-Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
Standard Price: SGD 79.93- Days to Ship: 14 Day(s) -
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight flutes.
90° (included angle type)
Work Material, General Steel/Heat-Treated Steel/Stainless Steel/Cast Iron/Aluminum/Copper/Resin
Single-edge blade
Tool grade, CarbideStandard Price: SGD 124.23- Days to Ship: 4 Day(s) or more -
Mini Corner Round Cutter MCRC (SKH56)
TAIYO-TOOL
[Applications]
· Round chamfer
[Single Blade / Double Blade]
· Single blade
[Tool Grade]
· High-speed steel
[Coating Y/N] N
[Coating Type] Non-Coated
[Flute No.] 1-FluteStandard Price: SGD 106.90- Days to Ship: 4 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
・ Standard typeStandard Price: SGD 113.36- Days to Ship: 7 Day(s) or more -
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.Standard Price: SGD 152.20- Days to Ship: 4 Day(s) or more -
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.Standard Price: SGD 218.96- Days to Ship: 7 Day(s) or more -
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
·With the flute tip hard to chip and shape that facilitates cutting chip discharge, processing from positioning ( = centering) to chamfering is possible with a single tool
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Standard Price: SGD 110.31- Days to Ship: 4 Day(s) or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shot
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Standard Price: SGD 83.70- Days to Ship: 4 Day(s) or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burr
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Standard Price: SGD 82.18- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
- Volume Discount
Standard Price: SGD 92.93- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
XAL Series Carbide Chamfer End Mill 2-Flute
- Volume Discount
Standard Price: SGD 56.45- Days to Ship: 4 Day(s) or more -
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
- Volume Discount
Standard Price: SGD 76.08- Days to Ship: 4 Day(s) or more -
2-flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
Standard Price: SGD 96.81- Days to Ship: 4 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Tool Material Type |
| Tool Diameter (D)(mm) |
| Tip angle (θ) |
| Application |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OKAZAKI SEIKO | NT TOOL | MISUMI | MISUMI | FUKUDA | NT TOOL | MISUMI | MISUMI | MISUMI | OSG | IWATA TOOL | SANDVIK | MISUMI | MISUMI | OSG | OSG | UNION TOOL | IWATA TOOL | KYOWA SEIKO | DAIICHITOOL | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | IWATA TOOL | IWATA TOOL | ASAHI TOOLS | OKAZAKI SEIKO | KYOWA SEIKO | TAIYO-TOOL | MAKOTOLOY | MAKOTOLOY | THE CUT | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG |
| Product Series | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS coated carbide chamfering end mill, 3-flute / short model | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-speed Steel Long Shank | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | TS coated carbide chamfering end mill, 2-flute / short model | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | 3-flute, Long Shank, Chamfering Cutter (negative type) LS-HSCT-N | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | ||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 14 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Tool Material Type | High-speed steel | Cobalt HSS | High-speed steel | Powder high-speed steel | Carbide | High-speed steel | Cobalt HSS | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | High-speed steel | Carbide | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Tool Diameter (D)(mm) | 3 ～ 25 | 20 | 10 ～ 30 | 10 ～ 25 | - | - | - | 3 ～ 12 | 3 ～ 16 | 3 ～ 12 | 3 ～ 25 | 0.6 ～ 4 | 6 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 25 | 3 ～ 25 | 0.8 ～ 1 | 1.2 ～ 16 | 0.3 ～ 4 | 8 ～ 46 | - | - | 10 ～ 25 | - | 16 ～ 25 | 16 ～ 25 | 1 ～ 2 | 1 ～ 2 | 1.2 ～ 16 | 0.1 ～ 1.5 | 10 ～ 60 | 3 ～ 20 | - | 2.6 ～ 23 | 1 ～ 20 | 1 ～ 20 | 2.8 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 10 | 3 ～ 16 | 3 ～ 12 | 0.5 ～ 1.5 |
| Tip angle (θ) | 60 ～ 120 | 90 | 90 | 60 ～ 120 | - | - | 90 | 90 | 60 ～ 120 | 90 | 90 | 90 | 90° | 60 ～ 120 | 90 | 90 | 90 ～ 130 | 90 | 90 | 90° | 60° ～ 90° | - | - | 60 ～ 160 | - | 90 | 90 | 90 | 90 | 60 | 90 | 60 ～ 90 | 90 ～ 120 | - | - | 60 | 60 | 90° | 90 | 90 | 90 | 90 | 60 ～ 120 | 90 | - |
| Application | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Round Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Chamfering/Horizontal | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Round Chamfer | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer / Drilling / Other | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Round Chamfer |
| work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Cast Iron[○] / Resin[○] | general steel[○] / high hardness steel[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | general steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○] | general steel[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | Quenched and tempered steel[○] / high hardness steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] | - | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade |
| Peripheral Blade Y/N | NA | NA | NA | Available | NA | NA | NA | Available | NA | Available | Available | NA | NA | Available | NA | NA | NA | NA | NA | - | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | - | - | - | - | - | NA | NA | NA | NA | NA | Available | NA |
| Coating Y/N | Available | Available | NA | Available | Available | NA | NA | Available | Available | Available | Available | Available | Available | Available | Available | Available | NA | NA | NA | NA | - | Available | NA | Available / NA | Available | Available | Available | NA | NA | Available | Available | NA | NA | NA | NA | NA | Available | Available | Available | NA | NA | Available | Available | Available | Available |
| Coating Type | TiN | TiN | - | - | AlCrN | Non-Coated | - | TS | TS | TS | TiCN | Other | Other | TS | TS | TiCN | Non-Coated | - | - | - | - | TS | - | TiCN | AlCrN | TiAlN | TiAlN | Non-Coated | Non-Coated | DLC | ALT | Non-Coated | Non-Coated | - | Non-Coated | - | TiAlN | TiAlN | TS | - | - | AlCrN | AlCrN | AlCrN | TiAlN |
| R Size (R)(mm) | - | - | - | - | 0.5 ～ 3 | 0.5 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.15 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | 0.3 ～ 10 | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 |
Loading...
Configure
Specification/Dimensions
-
Tool Material Type
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Tip angle (θ)
-
Application
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Narrow search by specifying Manufacturer
-
- MAKOTOLOY (22)
- OSG (17)
- IWATA TOOL (9)
- FUKUDA (5)
- OKAZAKI SEIKO (5)
- DIJET (3)
- KYOWA SEIKO (3)
- TAIYO-TOOL (3)
- ASAHI TOOLS (2)
- DAIICHITOOL (2)
- NS TOOL (2)
- NT TOOL (2)
- SANDVIK (2)
- THE CUT (2)
- FUJIGEN (1)
- MAPAL (1)
- UNION TOOL (1)
- BIG DAISHOWA SEIKI (0)
- ESCO (0)
- STAR-M (0)
- DIXI (0)
- Poulten&Graf (0)
- EIKOSHA (0)
- SANKO MFG (0)
- GUHRING (0)
- 7 LEADERS (0)
- NOGA JAPAN (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfer, V-Grooves
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?