(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Multi-Function Square End Mills (Carbide)（Machining Application：Side）

68 items

: 30; 45; 60

Days to Ship	All 3 Day(s) or Less 4 Day(s) or Less 5 Day(s) or Less 6 Day(s) or Less 7 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 14 Day(s) or Less

(Economy series) XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL
General Steel
3 Flutes

Standard Price:	SGD 26.81-
Days to Ship:	4 Day(s) or more

SAGCXLS SA Coated Carbide 6-Flute Long Shank

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.

[Features]
· SAGCX long blade, long shank end mill.
· Deep sections can be machined

Standard Price:	SGD 137.37-
Days to Ship:	4 Day(s) or more

Carbide Center V End Mill KSV-2

KYOWA SEIKO

Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

Standard Price:	SGD 77.20-
Days to Ship:	4 Day(s) or more

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

SAGCX SA Coated 6-Flute Carbide End Mill

SANKO MFG

[Features]
· Excellent rigidity; ideal for high-speed machining.
· Achieves precision finishing with little tilt.

Standard Price:	SGD 90.41-
Days to Ship:	4 Day(s) or more

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.

Standard Price:	SGD 52.00-
Days to Ship:	14 Day(s)

(Economy series) XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL
General Steel
4 Flutes

Standard Price:	SGD 26.10-
Days to Ship:	4 Day(s) or more

TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Stub Type

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° square end mill with a long contact surface between work material and blade that provides a long tool life.

Volume Discount

High-Hardness Steel
4 Flutes
B (Stub)

Standard Price:	SGD 40.88-
Days to Ship:	4 Day(s) or more

(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

MISUMI

Introducing a long type with 45° spiral in the popular XAL Series

Volume Discount

Standard Price:	SGD 32.59-
Days to Ship:	4 Day(s) or more

VAC Series Carbide 4-Flute Uneven Lead Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suppresses chattering with unequal lead and unequal flutes
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Stable machining is possible while maintaining finished surface accuracy
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	SGD 43.96-
Days to Ship:	4 Day(s) or more

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes

SR
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Standard Price:	SGD 83.55-
Days to Ship:	4 Day(s) or more

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)

·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Standard Price:	SGD 65.64-
Days to Ship:	4 Day(s) or more

DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

MISUMI

3-flute structure that's excellent in discharging chips

Volume Discount

DLC

Aluminum

3 Flutes

S (Short)
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

XAL Series Carbide Multi-functional Square End Mill 4-Flute / 45° Torsion / Stub Type

MISUMI

1.5 times longer blade length type with blade diameter capable of high speed, high feed machining

Volume Discount

XAL
General Steel
4 Flutes
B (Stub)

Standard Price:	SGD 29.78-
Days to Ship:	4 Day(s) or more

SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

Standard Price:	SGD 81.86-
Days to Ship:	14 Day(s)

SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

Standard Price:	SGD 71.26-
Days to Ship:	14 Day(s)

Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Standard Price:	SGD 71.64-
Days to Ship:	8 Day(s) or more

Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Standard Price:	SGD 87.00-
Days to Ship:	4 Day(s) or more

High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver

GUHRING

[Features]
· A single tool capable of all machining from drilling, ramping, and grooves to roughing and finishing.
· Furthermore, all of these processes can be done at high speed and high feed rate.

Standard Price:	SGD 73.93-
Days to Ship:	6 Day(s) or more

Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX

7 LEADERS

[Features]
· High performance 4/6-flute 45° torsion end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle Multilayer Coating
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.

Standard Price:	SGD 46.55-
Days to Ship:	6 Day(s) or more

Carbide 6-Flute End Mill for High Hardness 45°, E167TX

7 LEADERS

[Features]
·High-performance 6-flute 45° helix angle long end mill for processing high-hardness materials using UMG carbide material as the base material
·Highly efficient machining is possible by side cutting of high hardness material (Up to HRC70)
·Multi-layer coating of nanoparticles
·Due to high film hardness and oxidation resistance onset temperature, it is suitable for processing high hardness materials from HRC45 to 70
·Suitable for a wide range of work materials from general steel to high hardness steel

Standard Price:	SGD 93.50-
Days to Ship:	6 Day(s) or more

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 4 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 4 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

L (Long)
Days to Ship: 4 Day(s) or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

SR
Days to Ship: 4 Day(s) or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

L (Long)
Days to Ship: 4 Day(s) or more

Days to Ship:	4 Day(s) or more

Days to Ship:	4 Day(s) or more

Days to Ship:	4 Day(s) or more

Days to Ship:	4 Day(s) or more

Days to Ship:	4 Day(s) or more

TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

MISUMI

Ideal for the standing-wall finish of stainless steel

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Standard Price:	SGD 119.36-
Days to Ship:	4 Day(s) or more

DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

Given the rounded edge on the blade rear end, it suppresses machining streaks

Volume Discount

DLC
Aluminum
3 Flutes
B (Stub)

Standard Price:	SGD 75.69-
Days to Ship:	4 Day(s) or more

TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

MISUMI

MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Standard Price:	SGD 42.57-
Days to Ship:	4 Day(s) or more

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.

Volume Discount

Standard Price:	SGD 25.87-
Days to Ship:	4 Day(s) or more

XCP Coated Carbide Square End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Stub Type / Blade Length 2.5D Type

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Corresponds to cutting in both longitudinal and lateral directions, allowing a single unit to be used to machine complicated shapes.

Volume Discount

High-Hardness Steel
3 Flutes
B (Stub)

Standard Price:	SGD 54.80-
Days to Ship:	4 Day(s) or more

(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

MISUMI

Introducing a regular type with 45° spiral in the popular XAL Series

Volume Discount

Standard Price:	SGD 26.67-
Days to Ship:	4 Day(s) or more

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

MISUMI

[Features]
・Adopts unequal leads to suppress chatter and achieve high efficiency machining
・Optimum groove shape realizes smooth chip discharge
・Minimum electrical conductivity
・Can be re-polished.

Volume Discount

Standard Price:	SGD 43.18-
Days to Ship:	4 Day(s) or more

VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

MISUMI

[Features]
·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Standard Price:	SGD 38.40-
Days to Ship:	4 Day(s) or more

XAL Series Carbide Multi-functional Square End Mill 3-Flute / 45° Torsion / Regular Type

MISUMI

Single unit can be used for everything from Z-direction plunging to sideways routing and widening

Volume Discount

XAL
General Steel
3 Flutes
R (Regular)

Standard Price:	SGD 29.89-
Days to Ship:	4 Day(s) or more

XAL Series Carbide Multi-functional Square End Mill 3-Flute / 45° Torsion / SR Blade Length

MISUMI

Gets in there where you need it. Blade length between short and regular

Volume Discount

XAL
General Steel
3 Flutes
SR

Standard Price:	SGD 32.53-
Days to Ship:	4 Day(s) or more

HGGCNXS HG Coated Carbide NX Short Blade

SANKO MFG

Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.

Standard Price:	SGD 62.23-
Days to Ship:	4 Day(s) or more

HGGCNX HG Coated Carbide NX

SANKO MFG

[Features]
· Newly developed coating and new shape achieve a long life.
· Excellent chip discharge.
· Capable of high-speed machining.
· A new standard considering usability of the blade length is adopted.

Standard Price:	SGD 78.33-
Days to Ship:	4 Day(s) or more

SAGCXF SA Coated Carbide for GCX Groove

SANKO MFG

An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.

Standard Price:	SGD 89.45-
Days to Ship:	4 Day(s) or more

SAGCXL SA Coated Carbide 6-Flute Long Blade

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. Enables a wide range of side machining, due to the long flute length.

[Features]
· SAGCX long blade end mill.
· Machining is possible with a wide range of materials, from raw materials to hardened steel.

Standard Price:	SGD 142.55-
Days to Ship:	4 Day(s) or more

SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

A long shank type, it also features neck relief, enabling deep engraving operation.

Standard Price:	SGD 71.26-
Days to Ship:	14 Day(s)


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	SANKO MFG	KYOWA SEIKO	MISUMI	SANKO MFG	MISUMI	OKAZAKI SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	GUHRING	7 LEADERS	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO
Product Series	(Economy series) XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	SAGCXLS SA Coated Carbide 6-Flute Long Shank	Carbide Center V End Mill KSV-2	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	SAGCX SA Coated 6-Flute Carbide End Mill	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	(Economy series) XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Stub Type	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	XAL Series Carbide Multi-functional Square End Mill 4-Flute / 45° Torsion / Stub Type	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	Solid End Mill for Aluminum Machining (Long Shank) (Under Neck) AL-SEES3-LS Type	Solid End Mill for Aluminum Machining (Long Blade) AL-SEEL2 Type	High Efficiency Unequal Lead End Mill, 4-Flute, Regular, RF100 Diver	Carbide 4-Flute / 6-Flute High-Hardness End Mill 45° E166TX	Carbide 6-Flute End Mill for High Hardness 45°, E167TX	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type	XCP Coated Carbide Square End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Stub Type / Blade Length 2.5D Type	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	XAL Series Carbide Multi-functional Square End Mill 3-Flute / 45° Torsion / Regular Type	XAL Series Carbide Multi-functional Square End Mill 3-Flute / 45° Torsion / SR Blade Length	HGGCNXS HG Coated Carbide NX Short Blade	HGGCNX HG Coated Carbide NX	SAGCXF SA Coated Carbide for GCX Groove	SAGCXL SA Coated Carbide 6-Flute Long Blade	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated
Days to Ship	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	14 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	14 Day(s)	14 Day(s)	8 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	14 Day(s)
Specifications	XAL General Steel 3 Flutes			TS General Steel 4 Flutes R (Regular)		TS General Steel 3 Flutes R (Regular)		XAL General Steel 4 Flutes	TS General Steel 4 Flutes S (Short)	High-Hardness Steel 4 Flutes B (Stub)			TS General Steel 3 Flutes SR	TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	DLC Aluminum 3 Flutes S (Short)	XAL General Steel 4 Flutes B (Stub)								TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes L (Long)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes L (Long)	TS SUS 3 Flutes R (Regular)	DLC Aluminum 3 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)		High-Hardness Steel 3 Flutes B (Stub)				XAL General Steel 3 Flutes R (Regular)	XAL General Steel 3 Flutes SR
Blade diameter (D)(φ)	1 ～ 12	6 ～ 30	0.5 ～ 6	1 ～ 20	3 ～ 32	1 ～ 20	3 ～ 20	2 ～ 20	1 ～ 20	3 ～ 12	1 ～ 12	2 ～ 20	3 ～ 16	2 ～ 20	1 ～ 16	2 ～ 22	1 ～ 12	1 ～ 10	3 ～ 20	3 ～ 20	3 ～ 22	1 ～ 25	4 ～ 20	3 ～ 20	6 ～ 20	1 ～ 12	1 ～ 20	2 ～ 20	3 ～ 16	2 ～ 20	3 ～ 12	5 ～ 22	3 ～ 12	2 ～ 12	2 ～ 12	1 ～ 12	3 ～ 25	3 ～ 20	1 ～ 16	3 ～ 10	5 ～ 20	3 ～ 25	3 ～ 25	3 ～ 30	3 ～ 20
Blade length (ℓ)(mm)	1.5 ～ 26	12 ～ 55	1 ～ 12	4 ～ 56	10 ～ 65	4 ～ 56	10 ～ 45	5 ～ 38	3 ～ 38	4.5 ～ 18	5 ～ 60	6 ～ 45	5 ～ 40	3.5 ～ 30	1.5 ～ 24	3.5 ～ 30	2 ～ 24	1.5 ～ 15	10 ～ 45	15 ～ 80	5 ～ 33	4.5 ～ 85	11 ～ 38	8 ～ 38	26 ～ 76	1.5 ～ 18	3 ～ 38	5 ～ 75	5 ～ 40	5 ～ 75	10.5 ～ 38	9 ～ 33	8 ～ 26	6 ～ 38	4.5 ～ 30	4 ～ 48	8 ～ 38	7 ～ 26	4 ～ 48	12 ～ 28	13 ～ 38	10 ～ 62	10 ～ 50	15 ～ 100	10 ～ 45
Underneck length (ℓ1)(mm)	-	-	-	26 ～ 92	-	26 ～ 92	-	-	18 ～ 72	-	-	-	22 ～ 78	30 ～ 140	14 ～ 74	30 ～ 140	17 ～ 50	-	-	-	-	-	18 ～ 52	-	-	14 ～ 68	18 ～ 73	30 ～ 112	22 ～ 78	30 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	15 ～ 80
Shank diameter (d)(mm)	4 ～ 12	6 ～ 25	3 ～ 6	6 ～ 20	6 ～ 32	6 ～ 20	6 ～ 20	4 ～ 20	4 ～ 20	3 ～ 12	4 ～ 12	6 ～ 20	6 ～ 16	6 ～ 20	6 ～ 16	6 ～ 20	4 ～ 12	6 ～ 10	6 ～ 20	6 ～ 20	4 ～ 20	3 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 20	6 ～ 16	6 ～ 20	6 ～ 12	4 ～ 20	6 ～ 12	6 ～ 12	3 ～ 12	4 ～ 12	6 ～ 25	6 ～ 20	6 ～ 16	6 ～ 10	6 ～ 20	3 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20
Number of flutes(sheet)	3	6	2	4	6	3	3	4	4	4	4	4	3	3	4	4	3	4	3	4	3	2	-	4 ～ 6	6	3	3	3	4	4	3	3	4	4	3	4	4	4	3	3	4	3 ～ 4	3 ～ 4	6	3
Overall Length (L)(mm)	45 ～ 100	80 ～ 200	40 ～ 70	60 ～ 130	50 ～ 160	60 ～ 130	45 ～ 105	45 ～ 125	60 ～ 110	40 ～ 80	45 ～ 105	50 ～ 100	60 ～ 110	80 ～ 200	60 ～ 110	80 ～ 200	40 ～ 80	60 ～ 80	45 ～ 105	70 ～ 150	70 ～ 200	45 ～ 160	57 ～ 104	50 ～ 100	80 ～ 160	60 ～ 100	60 ～ 110	60 ～ 150	60 ～ 110	60 ～ 150	60 ～ 100	80 ～ 200	60 ～ 100	60 ～ 100	40 ～ 100	45 ～ 105	57 ～ 104	54 ～ 92	60 ～ 110	60 ～ 90	50 ～ 110	50 ～ 140	50 ～ 140	70 ～ 200	70 ～ 800
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Variable lead	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
Coating	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	For General Steels (AlCrN, etc.)	DLC	Non-Coated	Non-Coated	Non-Coated	-	-	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	Non-Coated
Blade tip shape	With Lead	With Lead	-	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	With Lead	With Lead	-	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Micro R	With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	C plane	Micro R	With Lead	With Lead	With Lead	With Lead	-	-	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge
Type	Square	High Helical	-	Square	High Helical	Square	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	Square	Square	Square	High Helical	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.4～0.95
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13～13.7
  - 13
  - 13.7
- 14
- 15～15.6
  - 15
  - 15.6
- 16
- 17
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
Drawing

Clear

Blade length (ℓ)(mm)
- 0.8～0.9
  - 0.8
  - 0.9
- 1～1.7
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
- 2～2.8
  - 2
  - 2.25
  - 2.3
  - 2.5
  - 2.8
- 3～3.8
  - 3
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.4
  - 4.5
- 5～5.9
  - 5
  - 5.4
  - 5.9
- 6～6.8
  - 6
  - 6.3
  - 6.5
  - 6.8
- 7～7.7
  - 7
  - 7.2
  - 7.5
  - 7.7
- 8～8.6
  - 8
  - 8.1
  - 8.6
- 9～9.9
  - 9
  - 9.5
  - 9.9
- 10～10.8
  - 10
  - 10.4
  - 10.5
  - 10.8
- 11～11.7
  - 11
  - 11.3
  - 11.7
- 12
- 12～12.6
  - 12.2
  - 12.5
  - 12.6
- 13～13.5
  - 13
  - 13.1
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22～22.5
  - 22
  - 22.5
- 23
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 45
- 46
- 47
- 48
- 50
- 53
- 55
- 56
- 57
- 60
- 62
- 64
- 65
- 66
- 70
- 75
- 76
- 80
- 85
- 100
[5-75/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 9
- 11.25
- 13.5
- 15～15.75
  - 15
  - 15.75
- 16
- 18
- 19.6
- 20
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 35～35.3
  - 35
  - 35.3
- 36
- 41
- 42
- 45
- 50
- 51
- 52
- 64
- 65
- 70
- 80
- 85
- 100
- 108
- 120
- 140
[14-112/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

18

20

25

32
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6
Clear

Overall Length (L)(mm)
35

37

38

40

41

42

45

49

50

53

54

55

57

58

60

63

64

65

66

70

72

73

75

80

82

83

84

85

90

92

95

100

104

105

110

115

120

121

125

130

135

140

150

155

160

180

200

220

800
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
Details

Clear