Board-To-Board Connectors（Application：Board-to-Board）

• 

  3M^TM Standard Socket / Header Socket Connector 79XX Series

  3M

  The socket connectors also support wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  
  [Features]
  Compatible with various headers and plug connectors for standard sockets/headers.
  ▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
  ▪ Also supports wiring by bulk pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
  · Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
  · A film-type pull tab can be attached (J3490-X).
  ▪ Accessory key prevents incorrect insertion between the same number of pins (J3435-0000).
  
  *Note: Strain relief sold separately. (Model: 3448-79**) **...Number of Pins.

  • Volume Discount

  Standard Price:	SGD 2.16-
  Days to Ship:	Same day or more

• 

  High Speed Transmission Compatible Connector for 0.5 mm Pitch Board-to-Board 4 to 5 mm Connection, FX10 Series

  HIROSE ELECTRIC

  [Features]
  · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
  Some in-stock items are custom products, therefore returns and cancellations are not possible.

  Standard Price:	SGD 4.32-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Box Header, Right-Angle Type

  3M

  · A right-angle box header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 11 varieties of pin combinations from 10 pins to 64 pins.
  · Ejector latch that simplifies securing and removal of the socket connector included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering or while inserting or extracting.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 2.39-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Click-Plug Connector, 42XX Series

  3M

  A click-plug connector that connects 1.27-mm pitch flat cables via pressure weld contacts—compatible with daisy chains.
  
  [Features]
  ▪ Available in 9 type of pin combinations from 10 pins to 60 pins.
  · Connects 1.27-mm pitch flat cables via pressure contact—compatible with daisy chains.
  · The ejector latch that simplifies the securing and removal of the socket connector is included.
  · Products with mounting flanges for panel mounting are available.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.

  Standard Price:	SGD 10.33-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Box Header, Straight Type

  3M

  · A straight box header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 11 varieties of pin combinations from 10 pins to 64 pins.
  · Ejector latch that simplifies securing and removal of the socket connector included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering or while inserting or extracting.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 2.42-
  Days to Ship:	3 Day(s) or more

• 

  DIN Standard Compliant, Board-To-Board Connector, PCN12 Series

  HIROSE ELECTRIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  Standard Price:	SGD 2.91-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, V Low-Profile Header, Straight Type

  3M

  [Features]
  · A V-type, low-profile, straight header is available in 12 varieties of pin combinations from 10 to 64 poles.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Board-to-board connection is feasible when combined with a board mount socket.

  Standard Price:	SGD 2.68-
  Days to Ship:	3 Day(s) or more

• 

  DIN Connector (Twin Contact Type) - XC5 (DIN Standard)

  OMRON

  Greatly expanded the variation of international standard DIN connectors.
  [Features]
  ・ The manufacturer is trying to expand the number of positions while taking advantage of the advantages of DIN connectors
  ・ Wide variations correspond to various applications in the industry
  ・ Compatible with the international needs from one-piece connectors (card edges) to two-piece connectors
  ・ Achieves low price while maintaining high reliability by adopting twin contact method
  ・ Achieves low insertion force that has resulted from FEM analysis
  ・ UL standard (file No. E103202), CSA standard (file No. LR62678) certified products are standard products
  [Applications]
  ・ It can be used as a board-to-board connector

  Standard Price:	SGD 2.62-
  Days to Ship:	Same day or more

• 

  Stacking Height 5 mm to 11 mm Compatible Half Pitch Stacking Connector, FX4 Series

  HIROSE ELECTRIC

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  Standard Price:	SGD 3.20-
  Days to Ship:	3 Day(s) or more

• 

  PCN10 Series (DIN Standard-Compliant: Dip Wrapping Type)

  HIROSE ELECTRIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  Standard Price:	SGD 3.21-
  Days to Ship:	3 Day(s) or more

• 

  Circuit Board-to-Cable Connector (in Equipment), KX14/KX15 Series

  JAPANAVIATION

  A two-piece type, board-to-board connector for use inside increasingly high-functionality, smaller, lighter AV devices, networking devices, and other advanced electronics.
  
  [Features]
  · Compatible with parallel board intervals of 4–9-mm (1-mm each).
  · Two, straight-type, insulator heights are available for KX14 (receptacle), and three for KX15 (plug).
  · When installing parallel boards, the board interval dimensions can be selected between 4–9-mm (1-mm each) by using different receptacle and plug combinations.

  • Volume Discount

  Standard Price:	SGD 3.60-
  Days to Ship:	3 Day(s) or more

• 

  Two-Row PCB Connector for 3M^TM 1.27-mm Pitch Flat Cable

  3M

  This is a 2-row type connector with a 2.54-mm row structure.
  
  [Features]
  ▪ Reduces the number of parts by directly soldering to PCBs.
  ▪ Wiring by pressure contact with a 1.27-mm pitch flat cable.
  · A 2.54-mm grid hole pattern with the same arrangement as a standard socket/header.
  ▪ Available in 11 varieties of pin combinations from 10 to 64 pins.

  Standard Price:	SGD 3.87-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, Board Mounting Socket, 85XX Series

  3M

  This is the socket connector 85XX series implemented between circuit boards in a parallel connection and conforming to the low profile header and V low profile header.
  
  [Features]
  · Compatible with low-profile/very low-profile headers for implementing parallel connections at board intervals of 18.3-mm and 14.0-mm respectively.
  ▪ Available in 10 varieties of pin combinations from 10 pins to 64 pins.
  · Kink machining tail portion that takes soldering work into account.
  ▪ The accessory key can prevent incorrect insertion between the same number of pins.

  Standard Price:	SGD 4.89-
  Days to Ship:	4 Day(s) or more

• 

  DIN Style Connector (Twin Contact Type) - XC5 (DIN Style)

  OMRON

  A DIN style board-to-board connector built to further expand on the DIN concept.
  [Features]
  ・ DIN standard connector can be mated
  ・ Ideal for automatic solder mounting because it is a circuit board mounted style
  ・ DIN style 1 adopts the same mounting dimensions as DIN
  ・ DIN style 2 further expands the mounting dimensions and realizes a comfortable mounting
  ・ UL standard (file No. E103202), CSA standard (file No. LR62678) certified products are standard products (Type XC5K is excluded)
  [Applications]
  ・ Communication equipment, office equipment, test and measuring instrument, disaster prevention and crime prevention equipment, security equipment, etc.
  ・ Mounted on a PCB and used in a wide range of applications

  Standard Price:	SGD 2.53-
  Days to Ship:	Same day or more

• 

  HM Connector (2-mm Pitch, Hard Metric Connectors) - XC8/XC9

  OMRON

  2.0-mm pitch board-to-board connector compliant with CompactPCI, the PCI bus standard for industrial computers.
  [Features]
  ・ Compliant with IEC61076-4-101
  ・ Compatible with 3U and 6U Eurocard packages
  ・ Socket contact is a highly reliable double-sided contact method
  ・ UL standard (file No. E103202) certified product as standard product (Excludes some products)
  [Applications]
  ・ For PCBs of communication equipment, office equipment, test and measuring instrument, disaster and crime prevention equipment, security equipment, etc.

  Standard Price:	SGD 25.03-
  Days to Ship:	4 Day(s) or more

• 

  NF Series, Ribbon Cable Connection / Board-to-Board Connector

  YAMAICHI

  [Features]
  ・ 1.27 mm contact pitch connector ideal for high density mounting
  ・ The mounting area can be reduced by about 40% compared to the conventional 2.54 mm pitch connector (For 64 contacts)
  ・ Product variations include cable connection type, board-to-board connection type, etc.
  ・ The cable batch IDC type enables batch IDC of 0.635 mm pitch ribbon cables with a unique 3-fork contact

  Standard Price:	SGD 20.58
  Days to Ship:	4 Day(s) or more

• 

  Board-to-Board Connector with 0.6-mm Pitch and 3 to 4-mm Height, FX8 Series

  HIROSE ELECTRIC

  A board-to-board height of 3 to 4 mm can be selected.
  Despite its small size, it has a guiding mechanism to improve operability.
  It can be used for a wide range of equipment.
  [Features]
  ・ Supports stacking height 3 mm to 16 mm
  ・ The board-to-board stacking height can be from 3 mm to 16 mm
  ・ SMT coplanarity
  ・ The SMT solder part lead has a high coplanarity of 0.1 mm or less, ensuring high accuracy
  ・ Inviting mating
  ・ Although it is very small, it has a guiding rib for mating, and self-alignment is ±0.6 mm, which emphasizes mating operability
  ・ Prevents incorrect insertion into the circuit board
  ・ With a boss for positioning the circuit board, erroneous insertion into the board was prevented by the boss position and boss diameter
  ・ 2 consolidated products
  ・ In order to improve the mating reliability when using 2 fine pitch connectors, a new concept of connecting 2 connectors that ensures the mounting position accuracy by connecting 2 connectors using a unique method is provided for each number of poles (The standard mating pitch between 2 rows is 11 mm for 2 connected products)

  Standard Price:	SGD 3.08-
  Days to Ship:	3 Day(s) or more

• 

  Stacking Heigh 5 to 9 mm Compatible, 0.8 mm Pitch Connector, FX6 Series

  HIROSE ELECTRIC

  The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
  
  [Features]
  · Compatible with 5 mm to 9 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
  · Long effective mating length of 1.7 mm.
  · A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
  · Fit guiding.
  · A ±1 mm self alignment and large guiding volume makes for easy mating.
  · Supports automatic mounting.
  ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

  • Volume Discount

  Standard Price:	SGD 2.19-
  Days to Ship:	3 Day(s) or more

• 

  2-mm Pitch Pin Header (Double-Row Terminal Type), A3 Series

  HIROSE ELECTRIC

  2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 1.06-
  Days to Ship:	3 Day(s) or more

• 

  TX24/TX25 Series

  JAPANAVIATION

  With an internal machine board-to-board connector, circuit boards can be connected horizontally, parallel, or perpendicularly by joining the receptacle (TX24) and plug (TX25).
  
  [Features]
  · A receptacle and plug along with a straight through-hole type and right angle thorough-hole type are available.
  · Ribbon-type (flat) contacts are used with a long contact stroke, excellent contact reliability/stability, and resistance to prying once mated.
  · The straight through-hole type offers 3 insulator heights and a parallel circuit board gap of 12 to 24 mm (2-m gap).
  ・Both receptacle (TX24) mating sides have an insulator mating guide, which excels at strong insertion, and is perfect for lock & panel mountings.
  ・This type has a satisfying ‘click' action when inserting and extracting.
  ・Hook pin and hook-less types are available to temporarily hold the circuit board while soldering and also prevent the solder from oozing.
  ・The contact terminal allows for simple circuit board pattern design with a 1.27-mm pitch and 1.905-mm array gap with a 4-row staggered arrangement.

  • Volume Discount

  Standard Price:	SGD 1.54-
  Days to Ship:	3 Day(s) or more

• 

  WR Series

  JAPANAVIATION

  [Features]
  · A low-profile connector with a minimal footprint and height, offering a range of selectable parallel board intervals of 4–9 mm.

  • Volume Discount

  Standard Price:	SGD 3.98-
  Days to Ship:	3 Day(s) or more

• 

  Floating Structured 0.5mm Pitch Connector for Board-to-Board Connection, FX20 Series

  HIROSE ELECTRIC

  0.5mm pitch. The structure features two independent contacts for high contact reliability. It is suitable for harsh conditions such as automotive equipment applications.

  Standard Price:	SGD 3.68-
  Days to Ship:	4 Day(s) or more

• 

  0.5-mm Pitch, 2 to 3-mm Height Board-to-Board Connector, FX11 Series

  HIROSE ELECTRIC

  [Features]
  · A board-to-board connector with a ground plate.
  · Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.

  Standard Price:	SGD 4.07-
  Days to Ship:	3 Day(s) or more

• 

  Stacking Height 3 mm to 16 mm, 0.6 mm Pitch Connector, FX8C Series

  HIROSE ELECTRIC

  The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm is applicable.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
  · Fit guiding.
  · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
  · Protects against incorrect insertion into the circuit board.
  · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
  · Two-part integrated product.
  · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 3.61-
  Days to Ship:	3 Day(s) or more

• 

  Board-to-Board Connector for Perpendicular Connections with 1-mm Pitch, FX5 Series

  HIROSE ELECTRIC

  A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
  
  [Features]
  · Number of pins, header-side height: 2 types.
  · 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
  · 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
  ·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
  ▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).

  Standard Price:	SGD 3.01-
  Days to Ship:	3 Day(s) or more

• 

  2.54mm Pitch Bottom Entry Type Connector, MDF7 Series

  HIROSE ELECTRIC

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  Standard Price:	SGD 0.95-
  Days to Ship:	3 Day(s) or more

• 

  2.54-mm Pitch Board-to-Board Connector, HIF3H Series

  HIROSE ELECTRIC

  This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
  
  [Features]
  ・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
  ・Compatibility: It can be combined with other HIF3 series connectors.

  Standard Price:	SGD 3.78-
  Days to Ship:	3 Day(s) or more

• 

  2.5-mm Pitch, Vertical Connection Post Header, MDF14A Series

  HIROSE ELECTRIC

  [Features]
  ■ For low-cost vertical board mounting with no reseating necessary
  · Post header specially designed for vertical board mounting with no reseating necessary.
  · Low-cost connection provided by a combination receptacle and plug design.
  ■ Current capacity: 5A
  · ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
  ■ Temporary board fixing mechanism
  · Kinking keeps boards temporarily in place.
  ■ Pin-out specifications
  · Compatible with a variety of pin-out specifications.

  Standard Price:	SGD 0.55-
  Days to Ship:	3 Day(s) or more

• 

  DIN Standard Compliant Board-to-Board Connector PCN13 Series

  HIROSE ELECTRIC

  This is a DIN standard compliant board-to-board connector. Reduces cost by using a single-sided, two-point connection for the terminal.

  Standard Price:	SGD 2.92
  Days to Ship:	4 Day(s) or more

• 

  PS Series Board-to-Board Connection Socket Receptacle

  JAPANAVIATION

  [Features]
  · A socket receptacle that can be combined with original pin headers for vertical or balanced board-to-board connections.
  · The socket contacts are pre-installed inside the socket receptacle housing for soldering onto the board via the through hole.
  · Straight and triangle types are available for parallel or vertical connections between boards in combination with the partner pin headers.
  · Open and box-style pin headers are available.

  • Volume Discount

  Standard Price:	SGD 2.45-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket/Header, V Low-Profile Header, Right Angle Type

  3M

  [Features]
  · Right-angle type, very low-profile header, available in 12 types of pin number variations from 10 to 64 pins.
  ▪ A 4-sided mold is used to protect the contacts and prevent reverse insertion of the socket connectors.
  · Board-to-board connection is feasible when combined with a board mount socket.

  Standard Price:	SGD 2.65-
  Days to Ship:	3 Day(s) or more

• 

  3M^TM Standard Socket / Header Right-Angle Board Mounting Socket

  3M

  This mounting socket supports the implementation of either parallel or vertical connections conforming to a low profile or very low-profile headers.
  
  [Features]
  · Supports implementation of either parallel or vertical connections conforming to a low profile or very low-profile headers.
  ▪ Available in 8 varieties of pin combinations from 20 to 64 pins.
  · Equipped with a mounting flange that effectively alleviates stress on through holes during temporary mounting for soldering or while performing insertion or extraction.
  ▪ The accessory key can prevent incorrect insertion between the same number of pins (J3435-0000).

  Standard Price:	SGD 15.40-
  Days to Ship:	5 Day(s) or more

• 

  3M^TM Standard Socket/Header, Low-Profile Header, Right-Angle Type

  3M

  · A low-profile, right-angle header with a 4-sided mold for protecting the contacts and preventing reverse insertion of the socket connectors.
  
  [Features]
  ▪ Available in 10 varieties of pin combinations from 10 pins to 60 pins.
  ▪ A 4-sided mold is used to protect the contacts, and prevent reverse insertion of the socket connectors.
  · Enables board-to-board connections by using in combination with board-mounted sockets.
  · Compatible with board thicknesses of 2.4 to 3.2 mm (tail length 3.9 mm).

  Standard Price:	SGD 6.16
  Days to Ship:	4 Day(s) or more

• 

  3M^TM Standard Socket/Header, Two-Level Header

  3M

  · The unique condominium structure of the two-level header enables space-saving, high-density mounting.
  
  [Features]
  · A unique condominium structure that enables space saving, high-density mounting.
  ▪ Available in 7 varieties of pin combinations from 16 pins to 60 pins.
  · An injector latch that simplifies the securing and removal of the socket connector is included.
  · Equipped with a mounting hole that effectively alleviates stress on through holes during temporary mounting for soldering/while inserting or extracting.
  · A 4-sided (top) and 3-sided (bottom) mold protects the contacts and prevents reverse insertion of the socket connectors.

  Standard Price:	SGD 15.95
  Days to Ship:	12 Day(s) or more

• 

  Half-Pitch Connector (for Board to Board Connections) - XH2

  OMRON

  A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
  
  [Features]
  · Available in the same shape as the G5D in both AC/DC or DC-only types.
  · Open-state leakage current between outputs is 10 μA or less.
  · The voltage resistance between input/output is 2500 VAC.
  · Input resistance and non-input resistance types available.
  · Overvoltage absorption circuit built in.
  ▪ Can switch between AC full-wave rectification and half-wave rectification.

  Standard Price:	SGD 3.15-
  Days to Ship:	3 Day(s) or more

• 

  Half-Pitch Connector (for Board to Board Connections) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  Standard Price:	SGD 1.87-
  Days to Ship:	Same day or more

• 

  High Speed Transmission, 0.8 mm Pitch, Connector For Board-to-Board Connection, FX18 Series

  HIROSE ELECTRIC

  0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.

  Standard Price:	SGD 5.18-
  Days to Ship:	3 Day(s) or more

• 

  Circuit Board Connector / DIN 41612

  HARTING

  Connector for HARTIG Circuit Board, DIN41612. (See manufacturer catalog for details)

  Standard Price:	SGD 22.54-
  Days to Ship:	7 Day(s) or more

Loading...