Square Connectors（P/Q/R：Other）

• 

  PCR Series

  HONDA TSUSHIN KOGYO

  1.27 mm pitch high density rectangular connector.
  [Features]
  ·Robust and ideal for interfaces due to the metal shell and metal case.
  ·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
  ·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
  ·For FCC and other EMI countermeasures.
  ·Live line connection (3 steps) is also available.
  ·Ideal for horizontal, parallel and vertical connections.
  ·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
  [Applications]
  ·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

  Standard Price:	SGD 4.36-
  Days to Ship:	3 Day(s) or more

• 

  PCR Half Pitch Solder Female Connector

  MISUMI

  Half-pitch Model PCR Solder Model Connector

  • Volume Discount

  • For Signal
  • PLC
  • EMI Countermeasure
  • Solder
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 10.92-
  Days to Ship:	4 Day(s) or more

• 

  PCR Half Pitch Female Press-fit Connector

  MISUMI

  Half-pitch model PCR Pressure Welding Model Connector

  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 11.51-
  Days to Ship:	4 Day(s) or more

• 

  QE Series

  JAPANAVIATION

  Using a metallic outer shell, this square connector is fitted using a lever.
  
  [Features]
  · Hard-type with metallic shell. Structure that is resistant to vibrational impact due to a lever lock (original type).
  ・A mismatch prevention key is included in the shell to prevent mistaken and reverse mating. By using the location setting post and key sold separately, 16 mismatch prevention patterns can be created.
  ・Also compatible with WV0/WL1 and other specialized railroad cables.
  ・3 cable-side plugs are provided to match the wires being used or the work being performed.
  Original type: with lever lock mechanism
  QE-A type: by enlarging the lever portion, this type is reinforced with a lever to prevent warping and other changes that occur during use.
  QE4 Type: by scaling up the shell wire pullout opening and cable clamp diameter, cables with large outer coverings can now be accommodated with ease.
  ・Other than the original type, there is an enlarged mating shell and an enhanced shell to prevent prying and reverse mating on the panel side receptacle, as well as a noise reducing ferrite attached to the insulator. There are 3 types that include ferrite.
  ・The panel side receptacle is compatible with both electric wire crimp connection contact and circuit board through hole connection contact (pin contact) types.
  ・The shell type can be disassembled and rearranged for simple modification during circuit changes and incorrect wiring.

  • Volume Discount

  Standard Price:	SGD 27.69-
  Days to Ship:	4 Day(s) or more

• 

  PCR Series Case

  HONDA TSUSHIN KOGYO

  This is a PCR series case.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  Standard Price:	SGD 4.36-
  Days to Ship:	Same day or more

• 

  PCR Half Pitch Connector with Hood

  MISUMI

  Half-pitch PCR Compatible Hood

  • Volume Discount

  CAD ：

  2D

  Standard Price:	SGD 12.99-
  Days to Ship:	4 Day(s) or more

• 

  Rack and Panel Connector, QR/P4 Series

  HIROSE ELECTRIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  Standard Price:	SGD 4.27
  Days to Ship:	4 Day(s) or more

• 

  1.78‑mm Pitch Rectangular Interface Connector QM Series

  HIROSE ELECTRIC

  Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
  
  [Features]
  · Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
  · Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
  · Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
  · The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
  · The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
  · There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

  Standard Price:	SGD 13.53-
  Days to Ship:	4 Day(s) or more

• 

  Right Angle Type Connector RD*D Series

  HIROSE ELECTRIC

  These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  • They are integrated with RD-type molds and are of simple construction.
  • They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
  • The connection and the board mounting areas are metal plated.
  • Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
  • A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
  • Various accessories can be employed to allow these connectors to be used in different applications.

  Standard Price:	SGD 7.49-
  Days to Ship:	Same day or more

• 

  Rectangular Miniature Multi-Pin Rack / Panel Crimp Connector, QR/P1 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Standard Price:	SGD 6.83-
  Days to Ship:	4 Day(s) or more

• 

  Rack And Panel Connector, QR/P8 Series

  HIROSE ELECTRIC

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  Standard Price:	SGD 1.14-
  Days to Ship:	3 Day(s) or more

• 

  PCS Series

  HONDA TSUSHIN KOGYO

  Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors
  
  [Features]
  · Board to cable types available in 20 to 96 cores.
  • Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
  · Soldered types also available.
  ▪ For EMI measures other than FCC.
  • Built with a durable structure for use as an interface.
  · Quick lock using a metal lock spring.
  · Those for panel relays are also available.
  · Accessories for preventing incorrect insertion are also available.
  · A wide range of core numbers, from 34 to 150, are also available for board to board.
  • Specifically designed for smooth insertion and extraction, even when using multiple cores.
  • Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

  Standard Price:	SGD 5.47-
  Days to Ship:	Same day or more

• 

  PCS Series Cases

  HONDA TSUSHIN KOGYO

  Rectangular connector case for 1.27 mm pitch high density interface.
  [Features]
  ·Vertical case for standard cable of PCS series
  ·Robust with metal shell + metal case, ideal for interfaces
  ·For FCC and other EMI countermeasures
  [Applications]
  ·Various compact equipment such as office equipment, communication, measurement, factory automation.

  Standard Price:	SGD 8.80-
  Days to Ship:	4 Day(s) or more

• 

  Small Rack and Panel Connector, QR/P15 Series

  HIROSE ELECTRIC

  Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
  
  [Features]
  ・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
  ・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
  ・Power supply compatibility: The 24-pin type incorporates power source terminal type.
  ・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
  ・Further, it is also possible to crimp using automated machines.
  ・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

  Standard Price:	SGD 4.67-
  Days to Ship:	4 Day(s) or more

• 

  PCR Half Pitch Male Press-fit/Panel Mountable Connector

  MISUMI

  Half-pitch PCR Panel Mounted Connector

  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Standard Price:	SGD 17.07-
  Days to Ship:	4 Day(s) or more

• 

  Rack and Panel Connector, QR/P6 Series

  HIROSE ELECTRIC

  It is popular as a square multi-pin rack / panel connector with plug-in connection.
  Compact design with separate crimp terminals for power supply and signal, and guide pin with integrated insulator.
  [Features]
  ・ The terminal, combined with the smooth insertion/removal feeling, provides stable contact pressure due to the point blade contact, and has a wide margin for the variation in connector coupling length that is peculiar to plug-in connection
  ・ The terminal is made compact by dividing it for power supply and signal
  ・ The signal terminal pitch inside the housing is 2.54 mm, and the opposing 2 poles on one side are arranged at a pitch of 6.9 mm to withstand high voltage, so it can be used for power supply
  ・ Insulation material uses flame retardant (UL9V-0)
  ・ Miniaturized by integrating the guide pin with the insulator
  ・ Floating structure is possible by using stepped screws
  ・ The female housing has a structure in which the contact part of the female terminal is deeper than the mating surface and it is compatible with the finger test (UL standard 1950 compliant)
  ・ This product is UL, CSA, TÜV certified

  Standard Price:	SGD 3.90
  Days to Ship:	4 Day(s) or more

• 

  Rectangular Multi-Pin Rack / Panel Crimp Connector, QR/P Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
  • For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • Guide pins are made of metal for the durability to withstand coupling shocks.
  • Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

  Standard Price:	SGD 1.50-
  Days to Ship:	3 Day(s) or more

• 

  QX Series

  JAPANAVIATION

  [Features]
  · A small, lightweight, highly reliable, square shape multipole connector.

  • Volume Discount

  Standard Price:	SGD 56.87
  Days to Ship:	4 Day(s) or more

• 

  RA1 Series

  JAPANAVIATION

  This composite connector includes ten pins (signal) and one pin (coaxial). The connector complies with the EIAJ RC-5238 "IMT-2000 Mobile Phone Connector A" standard.
  
  [Features]
  · A composite connector with ten pins (signal) and one pin (coaxial). Complies with the EIAJ RC-5238 "IMT-2000 Mobile Phone Connector A" standard.
  · This connector is smaller when compared to those used in digital mobile phones (DH series) (signal C/T pitch 0.5 mm, volume ratio: receptacle 1/3, plug 1/2).
  · Connectors used for transmitting signals prevent static electricity-induced and electromagnetic interference by using a metal shell.
  · Full cover gel is used for the fitting element. The structure prevents opening both in the plug receptacle and in the shell alignment fixture.
  · The receptacle's signal contact line can be shifted to support insertion and extraction of a live wire (sequence).
  · Signal contact supports high-speed transmission (and supports USB 1.1).
  · Coaxial contact supports an operating frequency range of up to 2.2 GHz.
  · Receptacle supports embossed taping by maintaining a 6 mm by 6 mm adherence area.

  • Volume Discount

  Standard Price:	SGD 3.98
  Days to Ship:	4 Day(s) or more

Loading...