(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

NSMD-MS MUGEN Micro Coating Micro Drill Short

NSMD-MS MUGEN Micro Coating Micro Drill Short

With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
NSMD-MS-0.01
NSMD-MS-0.02
NSMD-MS-0.03
NSMD-MS-0.04
NSMD-MS-0.05
NSMD-MS-0.015
NSMD-MS-0.025
NSMD-MS-0.035
NSMD-MS-0.045
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipHole diameter (drill diameter) D
(mm)
Groove Length L
(mm)
Manufacturer Code

SGD 482.06

1 Piece(s) 8 Day(s) 0.010.0604-00006-00100

SGD 322.01

1 Piece(s) 8 Day(s) 0.020.1204-00006-00200

SGD 247.77

1 Piece(s) 8 Day(s) 0.030.1804-00006-00300

SGD 189.92

1 Piece(s) 8 Day(s) 0.040.2404-00006-00400

SGD 127.26

1 Piece(s) 8 Day(s) 0.050.304-00006-00500

SGD 482.06

1 Piece(s) 8 Day(s) 0.0150.0904-00006-00150

SGD 322.01

1 Piece(s) 8 Day(s) 0.0250.1504-00006-00250

SGD 247.77

1 Piece(s) 8 Day(s) 0.0350.2404-00006-00350

SGD 189.92

1 Piece(s) 8 Day(s) 0.0450.304-00006-00450

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / Stainless Steel / Aluminum / Titanium / Copper / Resin Tool Material Type Carbide Overall Length L(mm) 40
Shank Type End Mill Link Coating Y/N Included Coating Type TiAlN
With/without Oil Hole None Number of flutes 2 Point Angle(°) 120
Thinning NA (γ) Neck Angle(°) 15° (d) Shank Diameter(mm) 4

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)