(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Stainless Steel Cylinder CJ5-S Series (CDJ5B10SR-90-H7BAL)
[Features]
· Compatible with use in environments with water splashing, such as in food processing, etc.
· For use with grease for food processing (NSF-H1 certified product)
· Stainless steel (SUS304) is used for all external parts, improving resistance to corrosion even in environments with exposure to water
· A special scraper (standard equipment) prevents water from entering the cylinder
· NBR or FKM seals can be chosen to suit the application
(i)Caution
- See catalog for specification details.
- CAD data is not supported for some model numbers.
- Product pictures are representations.
Part Number
Configured Part Number is shown.
CDJ5B10SR-90-H7BAL
Model Number Notation
Model Number Notation
Stainless Steel Cylinder CJ5-S Series Features
Stainless Steel Cylinder CJ5-S Series External Appearance
Stainless steel CJ5 S Series JIS symbol (double acting, single rod, rubber cushion)
External configuration that reduces liquid pooling
- Electrolytic polishing is carried out on the surface of the mounting brackets to make them smoother and prevent adhesion of liquids and contaminants.
- Provide plugs for unused mounting threads (CG5, S Series) to prevent accumulation of liquid in the mounting parts.
Specifications
| Tube Inner Diameter (mm) | 10 | 16 |
|---|---|---|
| Operating Method | Double acting, single rod | |
| Applicable Fluids | Air | |
| Proof Pressure | 1 MPa | |
| Maximum Operating Pressure | 0.7 MPa | |
| Minimum Operating Pressure | 0.1 MPa | |
| Ambient Temperature and Operating Fluid Temperature | Without auto switch: -10°C to +70°C, with auto switch: -10°C to +60°C | |
| Cushion | Rubber cushion | |
| Lubrication | Not required (non-lubricated) | |
| Stroke length tolerance | +1.0 0 | |
| Piston Speed | 50 to 750 mm/s | |
| Allowable Kinetic Energy | 0.035 J | 0.090 J |
| Mounting Support Type | Basic type, axial foot type, rod-end flange type, double clevis type | |
Standard Stroke Table
(Unit: mm)
| Tube Inner Diameter | Standard Stroke | Maximum Manufacturable Stroke |
|---|---|---|
| 10 | 15, 30, 45, 60, 75, 100, 125, 150 | 400 |
| 16 | 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 |
- * Manufacture of intermediate strokes at 1‑mm increments is possible. (Spacers are not used.)
- * See mounting minimum stroke for auto switch mounting. (P. 1,077)
Structural Drawing (*Cannot be Disassembled)
Structural Drawing
Components
| Number | Name | Material | |
|---|---|---|---|
| 1 | Rod cover | SUS304 | |
| 2 | Head cover | SUS304 | |
| 3 | Cylinder tube | SUS304 | |
| 4 | Piston rod | SUS304 | |
| 5 | Mounting nut | SUS304 | |
| 6 | Rod end nut | SUS304 | |
| 7 | Label protective sheet | PET | |
| 8 | Water-resistant scraper | CJ5□□SR | NBR |
| CJ5□□SV | FKM | ||
*The material and surface treatment of component parts other than those listed above are the same as the standard type in the CJ2 Series.
Drawing
Basic Type (B) / C□J5B□SR / V
Basic Type (B) / C□J5B□SR / V Drawing
(Unit: mm)
| Tube Inner Diameter (mm) | A | BA | BB | CA | CB | D | F | GA | GB | H | MM | NN | NA | NB | NDh8 | S | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 15 | 12 | 17 | 14 | 4 | 8 | 8 | 5 | 28 | M4 × 0.7 | M10 × 1.0 | 12.5 | 9.5 | 10(-0.022 to 0) | 46 | 74 |
| 16 | 15 | 18.3 | 18.3 | 20 | 20 | 5 | 8 | 8 | 5 | 28 | M5 × 0.8 | M12 × 1.0 | 12.5 | 9.5 | 12(-0.027 to 0) | 47 | 75 |
Axial Foot Type (L) / C□J5L□SR / V
Axial Foot Type (L) / C□J5L□SR / V Drawing
(Unit: mm)
| Tube Inner Diameter (mm) | A | BA | BB | CA | CB | D | F | GA | GB | H | LB | LC | LH | LT | LX | LY | LZ | MM | NN | NA | NB | S | X | Y | Z |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 15 | 15 | 12 | 17 | 14 | 4 | 8 | 8 | 5 | 28 | 21.5 | 5.5 | 14 | 2.5 | 33 | 25 | 42 | M4 × 0.7 | M10 × 1.0 | 12.5 | 9.5 | 46 | 6 | 9 | 74 |
| 16 | 15 | 18.3 | 18.3 | 20 | 20 | 5 | 8 | 8 | 5 | 28 | 23 | 5.5 | 14 | 2.5 | 33 | 25 | 42 | M5 × 0.8 | M12 × 1.0 | 12.5 | 9.5 | 47 | 6 | 9 | 75 |
- * Refer to p. 1,068 of the manufacturer's catalog for other models' drawings, specifications, etc.
| Part Number |
|---|
| CDJ5B10SR-90-H7BAL |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Head Cover Port Position | Type of Mount Support | Material of Gasket |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 10 | 90 | 01 to 0.7 | Built-in magnet | M Screw | H7BA | 3 | 2 | 90° to axis | Basic type | NBR |
Loading...
Basic Information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard | Cushion | Rubber cushion |
Please check the type/dimensions/specifications of the part CDJ5B10SR-90-H7BAL in the Stainless Steel Cylinder CJ5-S Series series.
Specification/Dimensions
-
type
- CDJ5□S
- CJ5□S
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Operating Pressure(MPa)
-
Specifications
- Built-in magnet
- Without magnet
-
Port thread type
- M Screw
-
Auto Switches
-
Lead Wire
- 0.5
- 0.5 (M8 3-pin plug connector)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 1
- 1 (M12 4-pin A-cord [normal-key] plug connector)
- 3
- 5
-
The number of the switches
-
Head Cover Port Position
- 90° to axis
- Axial direction
- Basic
- Basic type
-
Type of Mount Support
- Axial foot type
- Basic type
- Rod-end flange type
- U-Shaped Clevis Type
-
Material of Gasket
- FKM
- NBR
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| CDJ5B10SR-10-M9BA4 |
| CDJ5B10SR-10-M9BA5 |
| CDJ5B10SR-10-M9BAS |
| CDJ5B10SV-100-H7BAL |
| CDJ5B10SV-100-H7BAZ |
| CDJ5B10SV-100-M9BAZ |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Operating Pressure (MPa) | Specifications | Port thread type | Auto Switches | Lead Wire | The number of the switches | Head Cover Port Position | Type of Mount Support | Material of Gasket |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | 10 | 10 | 01 to 0.7 | Built-in magnet | M Screw | M9BA | 0.5 | 4 | 90° to axis | Basic type | NBR | ||
- | 1 Piece(s) | Quote | 10 | 10 | 01 to 0.7 | Built-in magnet | M Screw | M9BA | 0.5 | 5 | 90° to axis | Basic type | NBR | ||
- | 1 Piece(s) | Quote | 10 | 10 | 01 to 0.7 | Built-in magnet | M Screw | M9BA | 0.5 | 1 | 90° to axis | Basic type | NBR | ||
- | 1 Piece(s) | Quote | 10 | 100 | 01 to 0.7 | Built-in magnet | M Screw | H7BA | 3 | 2 | 90° to axis | Basic type | FKM | ||
- | 1 Piece(s) | Quote | 10 | 100 | 01 to 0.7 | Built-in magnet | M Screw | H7BA | 5 | 2 | 90° to axis | Basic type | FKM | ||
- | 1 Piece(s) | Quote | 10 | 100 | 01 to 0.7 | Built-in magnet | M Screw | M9BA | 5 | 2 | 90° to axis | Basic type | FKM |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?