(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Two-Circuit Limit Switch [WL-N/WL]

Two-Circuit Limit Switch [WL-N/WL]

Click this image to zoom it.

Move the mouse over the image to zoom

  • Two-Circuit Limit Switch [WL-N/WL]
  • Two-Circuit Limit Switch [WL-N/WL]
  • Two-Circuit Limit Switch [WL-N/WL]

The 2-circuit limit switch with variety of models that can be selected matching to the usage environment and application.

[Features]
· Circuit will break without fail by using 2-circuit double-break.
· Structure suitable to IP67 due to O ring and/or cover seal.
· Overseas approval corresponding to the machines for export approved by UL, CSA, TUV, EN/IEC, CCC.
· Most suitable to machines for export.
· Optimum high accuracy type in controlling the position is available in all types.
· Movement till operation is less (about 5°) but repeatability is two times of standard type

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
WL01CA2-LD
WLCA2-2
WLCA2-2LD
WLCA2-2LD-N
WLCA2-2N
WLCA2-2N-N
WLCA2-2NLD
WLCA2-2NTH
WLCA2-2TH
WLCA2-2TS-N
WLCA2-7
WLCA2-7-N
WLCA2-7LD-N
WLCA2-8
WLCA2-8-N
WLCA2-255
WLCA2-LD
WLCA2-LD-N
WLCA2-LDS-N
WLCA2-LE-N
WLCA2-N
WLCA2-RP
WLCA2-TC
WLCA2-TC-N
WLCA2-TH
WLCA2-TH-N
WLCA12-2LD-N
WLCA12-2LE-N
WLCA12-2N-N
WLCA12-2NLD-N
WLCA12-2NLE-N
WLCA12-2NTC-N
WLCA12-2NTH
WLCA12-2TH
WLCA12-2TH-N
WLCA12-2TS-N
WLCA12-55
WLCA12-LD-N
WLCA12-LE-N
WLCA12-N
WLCA12-TH
WLCA12-TH-N
WLCA12-TS-N
WLCL
WLCL-2
WLCL-2N
WLCL-2N-N
WLCL-2NLD-N
WLCL-LD
WLCL-LD-N
WLCL-LE-N
WLCL-N
WLCL-RP
WLD
WLD2
WLD2-LD
WLD2-TH
WLD3
WLD28
WLD28-LD
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipDetector Shape Environment Plunger Shape Type Boot Seal Roller Lever Shape Type Rod Shape Type Operating Temperature Range
(°C)
Acquired Standards Protection Structure Force Required for Push Side O.F.
(N)
Motion to Switching P.T.
(mm)
Angle to Switching P.T
(deg)
Max. Stroke T.T
(mm)
Contact Type Mechanical Life
(10,000 times)
Mechanical Operation Frequency
(times/min or Less)
Rated Operating Voltage
(V)
Rated Conductance Current
(A)
Main Body External Dimension, Width W
(mm)
Main Body External Dimension, Height H
(mm)
Main Body External Dimension, Length L
(mm)
Lever Length R
(mm)
Cable Specifications Detector element details Indicator Light Movement After the Operation OT
(mm)
Operating Position OP
(mm)
Conduit size Specification of Terminal Cord / cable length
(m)
Details Type O.D. Function Mounting system Direction of Operation Roller position Roller Type Contact format Built-in Switch Specification High Sealing Specification Connector Type Wiring Specifications Lever Tightening Specification AC Rated Voltage DC Rated Voltage AC Electrical Rating details DC Electrical Rating details Head Material Specifications Application Note

SGD 96.65

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / AC100/125V0.140±0.76094.138-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General standard type, overtravel type 90° micro-load typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 97.10

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP678.83-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.138-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-General standard reference type, overtravel type 90° operating typeφ17.5×7The type of the set( used as a part of a single item WL-1H1100 type )4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 98.13

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP678.83-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V1040±0.76094.138-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General standard reference type, overtravel type 90° operating typeφ17.5×7-4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 92.54

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceStandard--10~80UL / GB(CCC) / CSAIP6713.34-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.753.2±0.894.138-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 93.84

1 Piece(s) 81 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP679.61-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.760101.838-Stainless steel-based sintered roller φ17.5 × 7---G1/2Ground terminal not included-General operating display type, overtravel 90° operating typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 77.37

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-PresenceStandard--10~80-IP6713.34-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.753.2±0.894.138-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Separate parts set format, general form, reference form (roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 90.97

1 Piece(s) Same day Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP679.61-20-2-circuit Double-break1500120DC30V or Less / DC125V / AC100/125V1040±0.760101.838-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General standard type, overtravel 90° operating typeφ17.5×7The type of the set( used as a part of a single item WL-6H1100 type )Bi-directional (front / back) mountingSnap action, single sided operation supported--1a1b-------------

SGD 96.65

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard / Heat Resistant-NoStandard-5~120UL / GB(CCC) / CQC / CSAIP679.61-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.760101.838-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Environmentally tolerant type, overtravel type 90° (-2N type) heat-resistant typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 96.65

1 Piece(s) Same day Roller Lever Type (rotation)Standard / Heat Resistant-NoStandard-5~120UL / GB(CCC) / CQC / CSAIP678.83-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.138-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Environmentally tolerant type, overtravel type 90° (-2 type) heat-resistant typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 82.39

1 Piece(s) 64 Day(s) or more Roller Lever Type (rotation)Standard-PresenceStandard--10~80UL / GB(CCC) / CQC / CSAIP678.83-25±5-2-circuit Double-break1500120DC125V0.840±0.760101.838-Stainless Steel Type Sintering Roller φ17.5×7No--1/2-14NPTGround terminal included-General standard type, reference typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 81.31

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP6710.2-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.767.294.150-Stainless Steel Type Sintering Roller φ17.5×15No--G1/2Ground terminal not included-General standard type, lever type / general loadφ17.5×15-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 77.37

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceStandard--10~80-IP6710.2-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.150-Stainless Steel Type Sintering Roller φ17.5×15No--G1/2Ground terminal not included-General standard type, standard type (roller / lever)φ17.5×15Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 93.46

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceStandard--10~80UL / GB(CCC) / CSA / ENIP6710.2-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.150-Stainless Steel Type Sintering Roller φ17.5×15Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (roller / lever)φ17.5×15Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 76.96

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP678.04-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.163-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-General standard type, lever typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 77.37

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-PresenceStandard--10~80-IP678.04-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.163-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-General standard type, standard type (roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 101.39

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP678.83-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.138-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-General standard reference type, overtravel 90° operating type, sealed built-in switchφ17.5×7The type of the set( used as a part of a single item WL-3H1100 type )4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 98.37

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / AC100/125V1040±0.76094.138-Stainless Steel Type Sintering Roller φ17.5×7Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, lever type, reference typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 92.54

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-PresenceStandard--10~80-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.138-Stainless Steel Type Sintering Roller φ17.5×7Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 101.64

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-PresenceStandard--10~80-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.138-Stainless steel type sintering roller φ17.5×7, lever with hexagonal socketLight-emitting diode (LED)--G1/2Ground terminal not included, screw tightening terminal type-Spatter-prevention (lever with hexagonal socket)φ17.5×7Gold clad contact mounted cross bar structureFront / back mountingSnap Action--1a1b-------------

SGD 83.44

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceStandard--10~80-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.138-Stainless steel-based sintered roller φ17.5 × 7Neon Lamp--G1/2Ground terminal not included-General operating display type, standard type (roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 65.80

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceStandard--10~80UL / GB(CCC) / CSA / ENIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.138-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Separate parts set format, general form, reference form (roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 134.67

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-NoStandard--10~80UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.138-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Environmentally tolerant type, corrosion-resistant typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 93.17

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard / Cold Resistance-NoStandard--40~40UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.138-Stainless steel sintered roller φ17.5 × 7No--G1/2Ground terminal not included5Lever type, environmentally tolerant type / cold typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 93.46

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard / Cold Resistance-PresenceStandard--40~40-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.138-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Environmentally tolerant type, cold-resistant typeφ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 93.17

1 Piece(s) 59 Day(s) or more Roller Lever Type (rotation)Standard / Heat Resistant-NoStandard-5~120UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76094.138-Stainless steel sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Lever type, environmentally tolerant type / cold-tolerant typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 89.51

1 Piece(s) Same day Roller Lever Type (rotation)Standard / Heat Resistant-PresenceStandard-5~120-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.753.2±0.894.138-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Environmentally tolerant type, heat-resistant typeφ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 112.26

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80-IP6713.34-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mounting---1a1b-------------

SGD 104.18

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CSAIP6713.34-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7Neon Lamp--G1/2Ground terminal not included-General operating display type, standard type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 75.50

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CSAIP6713.34-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Separate parts set format, general form, reference form (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 112.26

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CSAIP6713.34-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 104.18

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80-IP6713.34-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7Neon Lamp--G1/2Ground terminal not included-General operating display type, standard type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 106.97

1 Piece(s) Same day Roller Lever Type (rotation)Standard / Cold Resistance-PresenceVariable Roller Levers--40~40UL / GB(CCC) / CQC / CSAIP679.61-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Environmentally tolerant type, cold-resistant typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 112.29

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard / Heat Resistant-NoVariable Roller Levers-5~120UL / GB(CCC) / CQC / CSAIP679.61-20-2-circuit Double-break1000120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Environmentally tolerant type, overtravel type 90° (-2N type) heat-resistant typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 113.14

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard / Heat Resistant-NoVariable Roller Levers-5~120UL / GB(CCC) / CQC / CSAIP678.83-25±5-2-circuit Double-break1000120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Environmentally tolerant type, overtravel type 90° heat-resistant typeφ17.5×7-4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 113.37

1 Piece(s) Same day Roller Lever Type (rotation)Standard / Heat Resistant-PresenceVariable Roller Levers-5~120UL / GB(CCC) / CSAIP6713.34-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Environmentally tolerant type, standard reference type, heat-resistant type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 109.88

1 Piece(s) 64 Day(s) or more Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CQC / CSAIP6713.34-25±5-2-circuit Double-break1500120DC125V0.840±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--1/2-14NPTGround terminal included-General form, standard type, reference typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 112.29

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoVariable Roller Levers--10~80UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Environmentally tolerant type, overtravel type 90°, sealed built-in switchφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 110.74

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 102.65

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7Neon Lamp--G1/2Ground terminal not included-General operating display type, standard type (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 72.70

1 Piece(s) Same day Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Separate parts set format, general form, reference form (variable roller / lever)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 110.35

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard / Heat Resistant-NoVariable Roller Levers-5~120UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--G1/2Ground terminal not included-Environmentally tolerant type, reference type, heat-resistant typeφ17.5×7-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 107.71

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard / Heat Resistant-PresenceVariable Roller Levers-5~120-IP6713.34-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.765.2±0.894.125-89-Stainless steel-based sintered roller φ17.5 × 7No--G1/2Ground terminal not included-Environmentally tolerant type, heat-resistant type (variable roller level)φ17.5×7Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 75.94

1 Piece(s) 59 Day(s) or more Roller Lever Type (rotation)Standard-PresenceVariable Roller Levers--10~80UL / GB(CCC) / CQC / CSAIP6713.34-15±5-2-circuit Double-break1500120DC125V0.840±0.76794.125-89-Stainless Steel Type Sintering Roller φ17.5×7No--1/2-14NPTGround terminal included-General form, standard type, reference typeφ17.5×7-4-direction (front / rear / side) mountingSnap action, single sided operation supported--1a1b-------------

SGD 74.77

1 Piece(s) 37 Day(s) or more Roller Lever Type (rotation)Standard-NoVariable Rods, Levers--10~80UL / GB(CCC) / CQC / CSAIP671.39-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.75594.125-140-Stainless steel rod φ3 ± 0.2 (length 160)No--G1/2Ground terminal not included-General standard type, lever type, reference type / general loadφ3 ± 0.2Head only parts set type (type WL-4H4100)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 85.31

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoVariable Rods, Levers--10~80UL / GB(CCC) / CQC / CSAIP672.55-25±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.75594.125-140-Stainless steel rod φ3 ± 0.2 (length 160)No--G1/2Ground terminal not included-General standard type, lever type, overtravel 90° operating type / general loadφ3 ± 0.2Head only parts set type (type WL-3H4100)Head four-directional (front / rear / side) mountingSnap Action--1a1b-------------

SGD 108.49

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoVariable Rods, Levers--10~80UL / GB(CCC) / CQC / CSAIP672.84-20-2-circuit Double-break1000120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.75594.125-140-Stainless steel rod φ3 ± 0.2 (length 160)No--G1/2Ground terminal not included-General standard type, lever type, overtravel 90° operating type / general loadφ3 ± 0.2Head only parts set type (type WL-6H4100)Head four-directional (front / rear / side) mountingSnap Action--1a1b-------------

SGD 94.06

1 Piece(s) Same day Rod ShapeStandard-Presence-Variable Metal Rods-10~80-IP671.39-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.74294.125-140-Stainless steel rod φ3 ± 0.2 (length 160)No--G1/2Ground terminal not included-Individual parts set mode, general type, reference type (variable rod / lever)φ3 ± 0.2 (length 160)Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 103.18

1 Piece(s) 4 Day(s) or more Rod ShapeStandard-Presence-Variable Metal Rods-10~80-IP671.39-20-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.74294.125-140-Stainless steel rod φ3 ± 0.2 (length 160)Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (roller / lever)φ3 ± 0.2 (length 160)Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 112.51

1 Piece(s) 34 Day(s) or more Roller Lever Type (rotation)Standard-NoVariable Rods, Levers--10~80UL / GB(CCC) / CQC / CSAIP671.39-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / AC100/125V1040±0.75594.125-140-Stainless steel rod φ3 ± 0.2 (length 160)Light-emitting diode (LED)--G1/2Ground terminal not included-General standard type, general load typeφ3 ± 0.2-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 107.71

1 Piece(s) Same day Rod ShapeStandard-Presence-Variable Metal Rods-10~80UL / GB(CCC) / CSA / ENIP671.39-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.74294.125-140-Stainless steel rod φ3 ± 0.2 (length 160)Light-emitting diode (LED)--G1/2Ground terminal not included-General operating display type, standard type (variable rod / lever)φ3 ± 0.2 (length 160)Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 99.58

1 Piece(s) 4 Day(s) or more Rod ShapeStandard-Presence-Variable Metal Rods-10~80UL / GB(CCC) / CSA / ENIP671.39-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.74294.125-140-Stainless steel rod φ3 ± 0.2 (length 160)Neon Lamp--G1/2Ground terminal not included-General operating display type, standard type (variable rod / lever)φ3 ± 0.2 (length 160)Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 94.06

1 Piece(s) Same day Rod ShapeStandard-Presence-Variable Metal Rods-10~80UL / GB(CCC) / CSA / ENIP671.39-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V-40±0.74294.125-140-Stainless steel rod φ3 ± 0.2 (length 160)No--G1/2Ground terminal not included-Individual parts set mode, general type, reference type (variable rod / lever)φ3 ± 0.2 (length 160)Gold clad contact mounted cross bar structure4-direction (front / rear / side) mountingSnap Action--1a1b-------------

SGD 147.34

1 Piece(s) 4 Day(s) or more Roller Lever Type (rotation)Standard / Outdoor Corrosion Resistance-NoVariable Rods, Levers--10~80UL / GB(CCC) / CQC / CSAIP671.39-15±5-2-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.75594.125-140-Stainless steel rod φ3 ± 0.2 (length 160)No--G1/2Ground terminal not included-Environmentally tolerant type, high-sealed type, corrosion-resistant type (coolant-resistant)φ3 ± 0.2-Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 62.44

1 Piece(s) 63 Day(s) or more Plunger TypeStandard[Top Plunger] Top, PlungerNo---10~80UL / GB(CCC) / CQC / CSAIP6726.671.7-29.52-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.74288.61-Stainless steel plunger φ9.2No6.434±0.8G1/2Ground terminal not included-General standard type, plunger typeφ9.2Head only parts set type (type WL-7H100)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 107.59

1 Piece(s) 29 Day(s) or more Plunger TypeStandard[Roller Plungers] Top, Roller PlungerNo---10~80UL / GB(CCC) / CQC / CSAIP6726.671.7-39.52-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.74296.7--Stainless steel-based sintered roller φ17 × 4.6No5.644±0.8G1/2Ground terminal not included-General standard type, plunger typeφ17×4.6Head only parts set type (type WL-7H200)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 93.05

1 Piece(s) 29 Day(s) or more Plunger TypeStandard[Roller Plungers] Top, Roller PlungerNo---10~80UL / GB(CCC) / CQC / CSAIP6726.671.7-39.52-circuit Double-break1500120DC30V or Less / DC125V / AC100/125V1040±0.74296.7--Stainless steel-based sintered roller φ17 × 4.6Light-emitting diode (LED)5.644±0.8G1/2Ground terminal not included-General operating display type, plunger typeφ17×4.6Head only parts set type (type WL-7H200)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 92.20

1 Piece(s) 4 Day(s) or more Plunger TypeStandard / Heat Resistant[Roller Plungers] Top, Roller PlungerNo--5~120UL / GB(CCC) / CQC / CSAIP6726.671.7-39.52-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.74296.7--Stainless steel-based sintered roller φ17 × 4.6No5.644±0.8G1/2Ground terminal not included-General operating display type, plunger type, heat-resistant typeφ17×4.6Head only parts set type (type WL-7H200)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 95.11

1 Piece(s) 34 Day(s) or more Plunger TypeStandardTop-ball plungerNo---10~80UL / GB(CCC) / CQC / CSAIP6726.671.7-412-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.74288.6--Stainless steel ball φ15.5No444.5±0.8G1/2Ground terminal not included-General standard type, plunger typeφ15.5Head only parts set type (type WL-7H300)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 102.12

1 Piece(s) 4 Day(s) or more Plunger TypeStandard[Roller Plungers] Top, Roller PlungerPresence---10~80UL / GB(CCC) / CQC / CSAIP6716.671.7-39.52-circuit Double-break1500120DC30V or Less / DC125V / DC250V / AC100/125V / AC240/250V / More than AC300V1040±0.74292.7--Stainless steel roller φ11.2 × 5No5.644.5±0.8G1/2Ground terminal not included-General standard form, plunger type, general loadφ11.2 × 5Head only parts set type (type WL-7H400)Bi-directional (front / back) mountingSnap Action--1a1b-------------

SGD 122.00

1 Piece(s) 4 Day(s) or more Plunger TypeStandard[Roller Plungers] Top, Roller PlungerPresence---10~80UL / GB(CCC) / CQC / CSAIP6716.671.7-39.52-circuit Double-break1500120DC30V or Less / DC125V / AC100/125V1040±0.74292.7--Stainless steel roller φ11.2 × 5Light-emitting diode (LED)5.644.5±0.8G1/2Ground terminal not included-General standard form, plunger type, general loadφ11.2 × 5Head only parts set type (type WL-7H400)Bi-directional (front / back) mountingSnap Action--1a1b-------------

Loading...

Basic Information

Main Body Size Standard

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)