(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 30/6/2024 to 6:00 (SGT) 1/7/2024. We apologize for the inconvenience.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
For General Piping, Tube Fitting, Bulkhead Union P
A one-touch fitting whose seal part uses a unique elastic sleeve that shuts out air leaks.
[Features]
·Quick-connect fitting for general pneumatic piping.
·After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· A wide lineup of products.
・ Allows centralized piping.
·Collet features good action to prevent sore fingertips even with frequent attachment and detachment. You can distinctly feel the pushing action in your fingers.
·The lock claws evenly grip the circumference of the tube.
·The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.
·After installation, you can change the take-off angle of the resin body.
[Applications]
·The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
(i)Caution
- The product images are representative only. Specifications may differ for each part number, including shape and color.
Japanese Only
Part Number
Configured Part Number is shown.
Rich Variety
PMP appearance
PMP dimensional drawing
Specifications
| Usable Fluids | Air, water |
|---|---|
| Maximum Operating Pressure | 1.0 MPa |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 60°C (no freezing) |
Tube Size
| Millimeter Size (mm) | ø4, ø6, ø8, ø10, ø12, ø16 |
|---|---|
| Inch Size | ø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8 |
Thread Size
| Metric Male Thread | M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Male Thread | R1/8, R1/4, R3/8, R1/2 |
| Metric Female Thread | M5 × 0.8 |
| Taper Pipe Female Thread | Rc1/8, Rc1/4, Rc3/8, Rc1/2 |
| Format | Tube Outer Diameter øD | M | B | E | A | øP | øS | Tube End C | Hex H | G | Orifice Diameter (ømm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PMP4 (4) | 4 | M12 × 1.5 | 31.4 | 9.2 | 12 | 10 | 16 | 14.9 | 14 | 5 | 3 | 6.8 |
| PMP6 (4) | 6 | M14 × 1.5 | 35.5 | 9.8 | 15 | 12.3 | 19 | 17 | 17 | 5 | 4.9 | 9.6 |
| PMP8 (4) | 8 | M16 × 1.5 | 38.4 | 10.7 | 15.5 | 14.2 | 22 | 18.1 | 19 | 6 | 7 | 14 |
| PMP10 (4) | 10 | M20 × 2 | 43 | 13 | 18.5 | 17.5 | 27.5 | 20.7 | 24 | 6 | 8 | 23 |
| PMP12 (4) | 12 | M24 × 2 | 48.4 | 13.2 | 20.5 | 21 | 31 | 23.4 | 27 | 6 | 11 | 32 |
| PMP5/32 (4) | 5/32 | M12 × 1.5 | 31.4 | 9.2 | 12 | 10 | 16 | 14.9 | 14 | 5 | 3 | 6.8 |
| PMP1/4 (4) | 1/4 | M14 × 1.5 | 35.5 | 9.8 | 15 | 12.3 | 19 | 17 | 17 | 5 | 5 | 9.5 |
| PMP5/16 (4) | 5/16 | M16 × 1.5 | 38.4 | 10.7 | 15.5 | 14.2 | 22 | 18.1 | 19 | 6 | 7 | 14 |
| PMP3/8 (4) | 3/8 | M20 × 2 | 43 | 13 | 18.5 | 17.5 | 27.5 | 20.7 | 24 | 6 | 8 | 24 |
Unit: mm
After installation, you can change the take-off angle of the resin body.
Allows centralized piping.
The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.
We offer a clean washing specification suitable for various particle- and oil-averse production processes. (Optional setting for clean room packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.
High performance and high quality
The lock claw evenly grips the circumference of the tube. Even after many years, tubes still attach and detach like new.
Unique elastic sleeve design shuts out air leaks.
Industry-leading range of variations
A wide assortment of different-diameter sizes is available. One fitting can be used where traditionally two fittings were required.
By reducing the number of fittings used, you can reduce costs and space.
We offer a clean room packaging specification, which is suited to piping in a clean environment. (option)
The product uses fluorochemical grease and is cleaned with clean air before being packaged in a clean room (equivalent to ISO Class 6).
The seal part uses a unique elastic sleeve that shuts out air leaks.
When release ring has been pushed
Push the release ring to collapse and hide the lock claw
Normal state
The lock claw evenly grips the circumference of the tube. Removal and refitting feels almost the same as the first insertion.
When you release your finger from the release ring, the fine ridges of the lock claw come into view
| Part Number |
|---|
| PMP1/4 |
| PMP3/8 |
| PMP4 |
| PMP4W |
| PMP5/16 |
| PMP6 |
| PMP6W |
| PMP8 |
| PMP8W |
| PMP10 |
| PMP10W |
| PMP12 |
| PMP12W |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable Tube O.D.1 (φ) | Release Ring Color | Resin Body Color | Trusco Code |
|---|---|---|---|---|---|---|---|---|---|
SGD 4.48 | 10 Piece(s) | 11 Day(s) or more | - | 6.35 | White | Black | - | ||
SGD 6.20 | 1 Piece(s) | 10 Day(s) | - | 9.53 | White | Black | - | ||
SGD 3.12 | 1 Piece(s) | 8 Day(s) | 10 | 4 | Black | Black | 378-1992 | ||
SGD 3.73 | 10 Piece(s) | 10 Day(s) or more | - | 4 | Light Gray | Light Gray | - | ||
SGD 4.88 | 10 Piece(s) | 10 Day(s) or more | - | 7.94 | White | Black | - | ||
SGD 3.34 | 1 Piece(s) | 8 Day(s) | 10 | 6 | Black | Black | 378-2000 | ||
SGD 4.02 | 10 Piece(s) | 10 Day(s) or more | - | 6 | Light Gray | Light Gray | - | ||
SGD 3.58 | 1 Piece(s) | 8 Day(s) | 10 | 8 | Black | Black | 378-2018 | ||
SGD 4.48 | 10 Piece(s) | 10 Day(s) or more | - | 8 | Light Gray | Light Gray | - | ||
SGD 4.48 | 1 Piece(s) | 8 Day(s) | 10 | 10 | Black | Black | 378-1976 | ||
SGD 5.74 | 10 Piece(s) | 10 Day(s) or more | - | 10 | Light Gray | Light Gray | - | ||
SGD 6.00 | 1 Piece(s) | 8 Day(s) | 10 | 12 | Black | Black | 378-1984 | ||
SGD 7.53 | 10 Piece(s) | 11 Day(s) or more | - | 12 | Light Gray | Light Gray | - |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Union with same diameter | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Application | Standard/Mini | Union, Equal Dia. | Partition unions P | Operating Temperature(°C) | 0::60 |
| Package Specifications | Regular Packaging Specifications |
Specification/Dimensions
-
Applicable Tube O.D.1(φ)
-
Release Ring Color
- Black
- Light Gray
- White
-
Resin Body Color
- Black
- Light Gray
-
Trusco Code
-
type
- PMP
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?