(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
General Plumbing Tube Fitting Tripod Elbow (PVX4-M5W)
Tube fitting for various types of piping with a rich lineup.
[Features]
·Water can be used depending on the conditions.
·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new.
·Unique elastic sleeve design shuts out air leaks.
·Industry-leading range of variations. A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required.
·By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.
[Applications]
·Pipe that branches in 2 directions at 90 degrees to the female thread side.
Japanese Only
Part Number
Configured Part Number is shown.
PVX4-M5W
Drawing
Units: mm
Product Specifications
| Operating fluid | Air, water (conditional) |
|---|---|
| Maximum operating pressure | 1.0 MPa |
| Operating vacuum pressure | -100 kPa |
| Operating temperature range | 0 to +60°C (no freezing) |
Structural drawing
- * This is an elbow type.
Standard table
| Part number | Tube outer diameter øD | R | A | B | L | ⌀P | Tube stop C | E | Width across flats H | Orifice diameter (ømm) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PVX4-M5 (4) | 4 | M5 × 0.8 | 2.8 [3] | 20.3 | 22.5 [22.3] | 10 | 14.9 | 18.2 | 10 | 2.4 | 10 |
| PVX4-M6 (4) | M6 × 1 | 3.8 | 21.3 | 22.5 | 3 | 11 | |||||
| PVX4-01 (4) | R1/8 | 8 | 23.3 | 24.3 | 13 | ||||||
| PVX4-02 (4) | R1/4 | 11 | 29 | 28 | 20.7 | 14 | 20 | ||||
| PVX6-M5 (4) | 6 | M5 × 0.8 | 2.8 [3] | 20.3 | 23.7 [23.5] | 12.5 | 17 | 20.5 | 10 | 2.4 | 12 |
| PVX6-M6 (4) | M6 × 1 | 3.8 | 21.3 | 23.7 | 3 | ||||||
| PVX6-01 (4) | R1/8 | 8 | 23.3 | 25.5 | 4.6 | 15 | |||||
| PVX6-02 (4) | R1/4 | 11 | 28 | 28.2 | 21.8 | 14 | 22 | ||||
| PVX6-03 (4) | R3/8 | 12 | 31.5 | 31.4 | 23.8 | 17 | 33 | ||||
| PVX8-01 (4) | 8 | R1/8 | 8 | 25 | 28.3 | 14.5 | 18.1 | 22.7 | 12 | 6 | 20 |
| PVX8-02 (4) | R1/4 | 11 | 29 | 30.2 | 23.7 | 14 | 6.7 | 25 | |||
| PVX8-03 (4) | R3/8 | 12 | 32 | 32.9 | 24.7 | 17 | 36 | ||||
| PVX10-01 (4) | 10 | R1/8 | 8 | 25.9 | 30.6 | 17.5 | 20.2 | 26 | 12 | 6 | 25 |
| PVX10-02 (4) | R1/4 | 11 | 29.4 | 32.1 | 14 | 8 | 31 | ||||
| PVX10-03 (4) | R3/8 | 12 | 33 | 35.4 | 27 | 17 | 8.3 | 42 | |||
| PVX10-04 (4) | R1/2 | 15 | 37 | 37.6 | 27.5 | 21 | 66 | ||||
| PVX12-02 (4) | 12 | R1/4 | 11 | 30.8 | 35.2 | 21 | 23.4 | 30.2 | 14 | 8 | 37 |
| PVX12-03 (4) | R3/8 | 12 | 33.5 | 37.7 | 17 | 10 | 49 | ||||
| PVX12-04 (4) | R1/2 | 15 | 38 | 40.3 | 31.2 | 21 | 10.3 | 74 |
Product features details
Features of this series by type
- Enables centralized piping. The triple types (PKD, PKG, and PKJ) and triple double types (PKVD and PKVG) enable compact and centralized piping.
- A cleanroom packaging specification that is ideal for piping in a clean environment is available. (Option) Fluorine-based grease is used as the grease, and after being washed with clean air, it is packaged in a cleanroom (equivalent to ISO class 6).
- The manufacturer offers clean washing specifications suitable for various particle- and oil-averse production processes. (Optional setting for cleanroom packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a cleanroom.
Selection support information
Description of part number
| Part Number |
|---|
| PVX4-M5W |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Application | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 | Appearance Color | Package Specifications | Trusco Code |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 5.68 | 10 Piece(s) | 10 Day(s) or more | Standard/Mini | 4 | M | M5×0.8 | Light Gray Specification | Regular Packaging Specifications | - |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Screw Mount Branch | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Screw Mounting, Multipoint | Tri Pod Elbow | Operating Temperature(°C) | 0::60 |
Please check the type/dimensions/specifications of the part PVX4-M5W in the General Plumbing Tube Fitting Tripod Elbow series.
Specification/Dimensions
-
Trusco Code
-
type
- PVX
-
Application
- Standard/Mini
- Clean circumstance
-
Applicable Tube O.D.1(φ)
-
Connection Screw Type 1
- M
- R
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
- M5×0.8
- M6×1
-
Appearance Color
- Light Gray Specification
- Standard Specifications
- Standard specifications
-
Package Specifications
- Cleanroom Packaging Specifications
- Regular Packaging Specifications
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 3 Day(s) or Less
- 4 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| PVX10-04 |
| PVX12-02 |
| PVX12-03 |
| PVX4-M6 |
| PVX6-01 |
| PVX6-02C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Application | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 | Appearance Color | Package Specifications | Trusco Code |
|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 11.72 | 10 Piece(s) | 10 Day(s) or more | Standard/Mini | 10 | R | 1/2 | Standard Specifications | Regular Packaging Specifications | - | ||
SGD 11.24 | 10 Piece(s) | 10 Day(s) or more | Standard/Mini | 12 | R | 1/4 | Standard Specifications | Regular Packaging Specifications | - | ||
SGD 11.48 | 10 Piece(s) | 10 Day(s) or more | Standard/Mini | 12 | R | 3/8 | Standard Specifications | Regular Packaging Specifications | - | ||
SGD 5.73 | 10 Piece(s) | 10 Day(s) or more | Standard/Mini | 4 | M | M6×1 | Standard Specifications | Regular Packaging Specifications | - | ||
SGD 5.12 | 1 Piece(s) | Same day | Standard/Mini | 6 | R | 1/8 | Standard Specifications | Regular Packaging Specifications | 809-5285 | ||
SGD 7.68 | 10 Piece(s) | 10 Day(s) or more | Clean circumstance / Standard/Mini | 6 | R | 1/4 | Standard specifications | Cleanroom Packaging Specifications | - |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?