(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- TS
- General Steel
- 3 Flutes
- R (Regular)
Part Number
Configured Part Number is shown.
| Part Number |
|---|
| SN-TSC-HEM3R6-[26-42/1]-21 |
| SN-TSC-HEM3R6.5-[28-46/1]-23 |
| SN-TSC-HEM3R7-[29-36/1]-24 |
| SN-TSC-HEM3R7.5-[29-36/1]-24 |
| SN-TSC-HEM3R8-[31-51/1]-26 |
| SN-TSC-HEM3R9-[31-50/1]-26 |
| SN-TSC-HEM3R10-[39-60/1]-34 |
| SN-TSC-HEM3R11-[39-70/1]-34 |
| SN-TSC-HEM3R12-[43-70/1]-38 |
| SN-TSC-HEM3R16-[53-78/1]-48 |
| SN-TSC-HEM3R20-[61-92/1]-56 |
| SN-TSC-HPEM3R6-[26-42/1]-21 |
| SN-TSC-HPEM3R6.5-[28-46/1]-23 |
| SN-TSC-HPEM3R7-[29-36/1]-24 |
| SN-TSC-HPEM3R7.5-[29-36/1]-24 |
| SN-TSC-HPEM3R8-[31-51/1]-26 |
| SN-TSC-HPEM3R9-[31-50/1]-26 |
| SN-TSC-HPEM3R10-[39-60/1]-34 |
| SN-TSC-HPEM3R11-[39-70/1]-34 |
| SN-TSC-HPEM3R12-[43-70/1]-38 |
| SN-TSC-HPEM3R16-[53-78/1]-48 |
| SN-TSC-HPEM3R20-[61-92/1]-56 |
| SNR-TSC-HEM3R6-[26-42/1]-[5-21/1] |
| SNR-TSC-HEM3R6.5-[28-46/1]-[5-23/1] |
| SNR-TSC-HEM3R7-[29-36/1]-[5-24/1] |
| SNR-TSC-HEM3R7.5-[29-36/1]-[5-24/1] |
| SNR-TSC-HEM3R8-[31-51/1]-[5-26/1] |
| SNR-TSC-HEM3R9-[31-50/1]-[5-26/1] |
| SNR-TSC-HEM3R10-[39-60/1]-[5-34/1] |
| SNR-TSC-HEM3R11-[39-70/1]-[5-34/1] |
| SNR-TSC-HEM3R12-[43-70/1]-[5-38/1] |
| SNR-TSC-HEM3R16-[53-78/1]-[5-48/1] |
| SNR-TSC-HEM3R20-[61-92/1]-[5-56/1] |
| SNR-TSC-HPEM3R6-[26-42/1]-[5-21/1] |
| SNR-TSC-HPEM3R6.5-[28-46/1]-[5-23/1] |
| SNR-TSC-HPEM3R7-[29-36/1]-[5-24/1] |
| SNR-TSC-HPEM3R7.5-[29-36/1]-[5-24/1] |
| SNR-TSC-HPEM3R8-[31-51/1]-[5-26/1] |
| SNR-TSC-HPEM3R9-[31-50/1]-[5-26/1] |
| SNR-TSC-HPEM3R10-[39-60/1]-[5-34/1] |
| SNR-TSC-HPEM3R11-[39-70/1]-[5-34/1] |
| SNR-TSC-HPEM3R12-[43-70/1]-[5-38/1] |
| SNR-TSC-HPEM3R16-[53-78/1]-[5-48/1] |
| SNR-TSC-HPEM3R20-[61-92/1]-[5-56/1] |
| TSC-HEM3R1 |
| TSC-HEM3R1.5 |
| TSC-HEM3R1.8 |
| TSC-HEM3R2 |
| TSC-HEM3R2.5 |
| TSC-HEM3R2.8 |
| TSC-HEM3R3 |
| TSC-HEM3R3.5 |
| TSC-HEM3R4 |
| TSC-HEM3R4.5 |
| TSC-HEM3R5 |
| TSC-HEM3R5.5 |
| TSC-HEM3R6 |
| TSC-HEM3R6.5 |
| TSC-HEM3R7 |
| TSC-HEM3R7.5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 6 | 21 | 6 | 60 | 26 ～ 42 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6.5 | 23 | 8 | 70 | 28 ～ 46 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7.5 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 8 | 26 | 8 | 75 | 31 ～ 51 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 9 | 26 | 10 | 80 | 31 ～ 50 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 34 | 10 | 90 | 39 ～ 60 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 11 | 34 | 12 | 100 | 39 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 12 | 38 | 12 | 100 | 43 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 16 | 48 | 16 | 110 | 53 ～ 78 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 20 | 56 | 20 | 130 | 61 ～ 92 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6 | 21 | 6 | 60 | 26 ～ 42 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6.5 | 23 | 8 | 70 | 28 ～ 46 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7.5 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 8 | 26 | 8 | 75 | 31 ～ 51 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 9 | 26 | 10 | 80 | 31 ～ 50 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 34 | 10 | 90 | 39 ～ 60 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 11 | 34 | 12 | 100 | 39 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 12 | 38 | 12 | 100 | 43 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 16 | 48 | 16 | 110 | 53 ～ 78 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 20 | 56 | 20 | 130 | 61 ～ 92 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Standard Neck Relief | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6 | 21 | 6 | 60 | 26 ～ 42 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6.5 | 23 | 8 | 70 | 28 ～ 46 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7.5 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 8 | 26 | 8 | 75 | 31 ～ 51 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 9 | 26 | 10 | 80 | 31 ～ 50 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 34 | 10 | 90 | 39 ～ 60 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 11 | 34 | 12 | 100 | 39 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 12 | 38 | 12 | 100 | 43 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 16 | 48 | 16 | 110 | 53 ～ 78 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 20 | 56 | 20 | 130 | 61 ～ 92 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | With Lead | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6 | 21 | 6 | 60 | 26 ～ 42 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 6.5 | 23 | 8 | 70 | 28 ～ 46 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 7.5 | 24 | 8 | 70 | 29 ～ 36 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 8 | 26 | 8 | 75 | 31 ～ 51 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 9 | 26 | 10 | 80 | 31 ～ 50 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 34 | 10 | 90 | 39 ～ 60 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 11 | 34 | 12 | 100 | 39 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 1 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 12 | 38 | 12 | 100 | 43 ～ 70 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 16 | 48 | 16 | 110 | 53 ～ 78 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
- | 1 Piece(s) | 6 Day(s) or more | 20 | 56 | 20 | 130 | 61 ～ 92 | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk | Sharp Corner | Cutting Edge R Processing | 2 | □ | ||
SGD 53.11 | 1 Piece(s) | Available | 4 Day(s) or more | 1 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 50.42 | 1 Piece(s) | Available | 4 Day(s) or more | 1.5 | 6 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 48.33 | 1 Piece(s) | Available | 4 Day(s) or more | 1.8 | 7 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 49.22 | 1 Piece(s) | Available | 4 Day(s) or more | 2 | 8 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 50.42 | 1 Piece(s) | Available | 4 Day(s) or more | 2.5 | 10 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 45.95 | 1 Piece(s) | Available | 4 Day(s) or more | 2.8 | 13 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 49.22 | 1 Piece(s) | Available | 4 Day(s) or more | 3 | 16 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 47.73 | 1 Piece(s) | Available | 4 Day(s) or more | 3.5 | 18 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 49.53 | 1 Piece(s) | Available | 4 Day(s) or more | 4 | 18 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 65.65 | 1 Piece(s) | Available | 4 Day(s) or more | 4.5 | 19 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 56.09 | 1 Piece(s) | Available | 4 Day(s) or more | 5 | 21 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 57.36 | 1 Piece(s) | Available | 4 Day(s) or more | 5.5 | 21 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 53.78 | 1 Piece(s) | Available | 4 Day(s) or more | 6 | 21 | 6 | 60 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 2 | ● | |
SGD 64.04 | 1 Piece(s) | Available | 4 Day(s) or more | 6.5 | 23 | 8 | 70 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 69.42 | 1 Piece(s) | Available | 4 Day(s) or more | 7 | 24 | 8 | 70 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● | |
SGD 105.23 | 1 Piece(s) | Available | 4 Day(s) or more | 7.5 | 24 | 8 | 70 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Stocked Product | 1 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| TSC-HEM3R (Standard) TSC-HPEM3R (Sharp Edge) |
1 | 4 | 60 | 6 | 1 |
| 1.5 | 6 | 60 | 6 | 1 | |
| 1.8 | 7 | 60 | 6 | 1 | |
| 2 | 8 | 60 | 6 | 1 | |
| 2.5 | 10 | 60 | 6 | 1 | |
| 2.8 | 13 | 60 | 6 | 1 | |
| 3 | 16 | 60 | 6 | 1 | |
| 3.5 | 18 | 60 | 6 | 1 | |
| 4 | 18 | 60 | 6 | 1 | |
| 4.5 | 19 | 60 | 6 | 1 | |
| 5 | 21 | 60 | 6 | 1 | |
| 5.5 | 21 | 60 | 6 | 1 | |
| 6 | 21 | 60 | 6 | 2 | |
| 6.5 | 23 | 70 | 8 | 1 | |
| 7 | 24 | 70 | 8 | 1 | |
| 7.5 | 24 | 70 | 8 | 1 | |
| 8 | 26 | 75 | 8 | 2 | |
| 9 | 26 | 80 | 10 | 1 | |
| 10 | 34 | 90 | 10 | 2 | |
| 11 | 34 | 100 | 12 | 1 | |
| 12 | 38 | 100 | 12 | 2 | |
| 16 | 48 | 110 | 16 | 2 | |
| 20 | 56 | 130 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
Basic Information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) | Tolerance of OD(mm) | 0 ~ -0.02 |
Specification/Dimensions
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
-
Geometry
- Sharp Corner
- With Lead
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
type
- SN-TSC-HEM3R
- SN-TSC-HPEM3R
- SNR-TSC-HEM3R
- SNR-TSC-HPEM3R
- TSC-HEM3R
- TSC-HPEM3R
Days to Ship
-
- All
- 4 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?