(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Linear Bushing Housing Units With Dowel Holes-Tall Blocks, Double

Volume Discount

Check FAQ of this product (2 items)

MISUMI

MiSUMi Economy

MISUMI

Part Number

Configured Part Number is shown.

Drawing
3D Preview
Part Numbers
Specifications
More Information

Product Overview

The housing unit type is a linear motion guiding mechanism matched with linear shaft, which has built-in linear bushing in the aluminum alloy case.
Resin retainers are available in black and yellow, with the same performance. Please feel free to use.

Product Features

Feature 1: Good interchangeability. Built-in linear bushings have good interchangeability because they can be used with shafts randomly.
Feature 2: Appropriate specifications can be selected according to the conditions of use.
Feature 3: Reduced number of parts and machining time.

Dimensional Drawing

Housing		Ambient Operating Temp
Material	Surface Treatment	Ambient Operating Temp
Aluminum Alloy	Anodized	-20~80℃

Specification Table

Part Number			With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d_1×t
Type	dr	Tolerance	With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d_1×t
E-LBHSW	5	+0.003 -0.012	Not Specified (Without Dowel Hole)	10	4	40	18	28	13	15	20	5	M4 (8)	M4 (10)	－	(1)	6×5 (For M3 Bolts)
	6		Not Specified (Without Dowel Hole)	12	3	46	20	30	14	16	22		M4 (8)	M4 (11)	4
	8		Not Specified (Without Dowel Hole) P (With Dowel Hole)	15	3	56	30	42	16	20	26		M5 (8.5)	M4 (15)	5
	10			19	4	68	36	50	19	26	32	6	M6 (9.5)	M5 (20)	6		8×6 (For M4 Bolts)
	12			21		70			20	28	34	6	M6 (9.5)	M5 (22)	6		8×6 (For M4 Bolts)
	13			23		74	42	55	25	30	43	7	M6 (13)	M6 (23)	－		9×7 (For M5 Bolts)
	16			28	3.8	84	52	65	27	36	49	7	M6 (13)	M6 (29)	8		9×7 (For M5 Bolts)
	20	+0.003 -0.013		32	3.8	94	58	70	31	42	54	8	M8 (15)	M8 (34)	－		11×8 (For M6 Bolts)
	25			40	3.2	128	80	100	37	52	65	9	M10 (17)	M10 (42)	－		14×10 (For M8 Bolts)
	30			45	3.2	138	90	110	40	58	71	9	M10 (17.5)	M10 (48)	－		14×10 (For M8 Bolts)

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
E-LBHSW5
E-LBHSW6
E-LBHSW8
E-LBHSW8-P
E-LBHSW10
E-LBHSW10-P
E-LBHSW12
E-LBHSW12-P
E-LBHSW13
E-LBHSW13-P
E-LBHSW16
E-LBHSW16-P
E-LBHSW20
E-LBHSW20-P
E-LBHSW25
E-LBHSW25-P
E-LBHSW30
E-LBHSW30-P

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Dia. D (Ø)	Height H (mm)	Dowel Hole Dimensions (mm)
SGD 21.70	1 Piece(s)	Available	5 Day(s)	5	40	10	20	Not provided
SGD 16.90	1 Piece(s)	Available	5 Day(s)	6	46	12	22	Not provided
SGD 16.20	1 Piece(s)	Available	5 Day(s)	8	56	15	26	Not provided
SGD 18.60	1 Piece(s)	Available	5 Day(s)	8	56	15	26	3
SGD 17.00	1 Piece(s)	Available	5 Day(s)	10	68	19	32	Not provided
SGD 19.30	1 Piece(s)	Available	5 Day(s)	10	68	19	32	4
SGD 17.20	1 Piece(s)	Available	5 Day(s)	12	70	21	34	Not provided
SGD 19.50	1 Piece(s)	Available	5 Day(s)	12	70	21	34	4
SGD 20.60	1 Piece(s)	Available	5 Day(s)	13	74	23	43	Not provided
SGD 22.90	1 Piece(s)	Available	5 Day(s)	13	74	23	43	4
SGD 21.70	1 Piece(s)	Available	5 Day(s)	16	84	28	49	Not provided
SGD 24.50	1 Piece(s)	Available	5 Day(s)	16	84	28	49	4
SGD 24.50	1 Piece(s)	Available	5 Day(s)	20	94	32	54	Not provided
SGD 27.20	1 Piece(s)	Available	5 Day(s)	20	94	32	54	5
SGD 30.50	1 Piece(s)	Available	5 Day(s)	25	128	40	65	Not provided
SGD 33.00	1 Piece(s)	Available	5 Day(s)	25	128	40	65	5
SGD 38.20	1 Piece(s)	Available	5 Day(s)	30	138	45	71	Not provided
SGD 40.30	1 Piece(s)	Available	5 Day(s)	30	138	45	71	5

Dimensional Drawing

Specification Table

Part Number			With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d_1×t
Type	dr	Tolerance	With or Without Dowel Hole	D	(S)	L	L₁	L₂	h	W	H	R	M₁ (Effective Length)	M₂ (Effective Length)	C	C₁	d_1×t
E-LBHSW	5	+0.003 -0.012	Not Specified (Without Dowel Hole)	10	4	40	18	28	13	15	20	5	M4 (8)	M4 (10)	－	(1)	6×5 (For M3 Bolts)
	6		Not Specified (Without Dowel Hole)	12	3	46	20	30	14	16	22		M4 (8)	M4 (11)	4
	8		Not Specified (Without Dowel Hole) P (With Dowel Hole)	15	3	56	30	42	16	20	26		M5 (8.5)	M4 (15)	5
	10			19	4	68	36	50	19	26	32	6	M6 (9.5)	M5 (20)	6		8×6 (For M4 Bolts)
	12			21		70			20	28	34	6	M6 (9.5)	M5 (22)	6		8×6 (For M4 Bolts)
	13			23		74	42	55	25	30	43	7	M6 (13)	M6 (23)	－		9×7 (For M5 Bolts)
	16			28	3.8	84	52	65	27	36	49	7	M6 (13)	M6 (29)	8		9×7 (For M5 Bolts)
	20	+0.003 -0.013		32	3.8	94	58	70	31	42	54	8	M8 (15)	M8 (34)	－		11×8 (For M6 Bolts)
	25			40	3.2	128	80	100	37	52	65	9	M10 (17)	M10 (42)	－		14×10 (For M8 Bolts)
	30			45	3.2	138	90	110	40	58	71	9	M10 (17.5)	M10 (48)	－		14×10 (For M8 Bolts)

dr	Dowel Hole Dimensions				Basic Load Rating		Allowable Static Torque (N·m)	Mass (g)
dr	P	C	ℓ₂	E	C (Dynamic) N	Co (Static) N	Allowable Static Torque (N·m)	Mass (g)
5	-	-	-	-	263	412	1.38	35
6	-	-	-	-	324	529	2.18	40
8	3	4	4	16	431	784	4.31	75
10	4	5	5	20	588	1100	7.24	150
12				20	657	1200	10.9	168
13				26	813	1570	11.6	248
16				36	1230	2350	19.7	383
20	5	6	6	38	1400	2740	26.8	520
25				58	1560	3140	43.4	1120
30				68	2490	5490	82.8	1384

* If any product with dowel holes is selected, 2 pieces of dowel holes will be delivered together.

Material Specification

Housing		Ambient Operating Temp
Material	Surface Treatment	Ambient Operating Temp
Aluminum Alloy	Anodized	-20~80℃

Usage Method

Product Drawings	Instructions for use
	When the linear bushing is under heavy load (unbalanced load), one piece of single type is not applicable. It is recommended to use one piece of double type or multiple pieces of single type.
	Linear bushing is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear bushing is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bushing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Precautions

■ When the linear bushing is subjected to large moment load (eccentric load), one piece of single type is not applicable, so it is recommended to use one piece of double type or multiple pieces of single type.
■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bushing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bushing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bushing is recommended to be installed on the holder with H7 tolerance. The linear bushing is in clearance fit with the housing.

Basic Information

Type	Housing	Style	Standard	Ball Recirculating Type	Double
Types	Linear Bushing Housing Unit - Tall Blocks	Length	Double

Configure

18 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Inscribed Circle Dia. dr(Ø)
5

6

8

10

12

13

16

20

25

30
Clear
Overall Length L(mm)
40

46

56

68

70

74

84

94

128

138
Clear
Outer Dia. D(Ø)
10

12

15

19

21

23

28

32

40

45
Clear
Height H(mm)
20

22

26

32

34

43

49

54

65

71
Clear
Dowel Hole Dimensions(mm)
- 3
- 4
- 5
- Not provided
Clear
type
- E-LBHSW
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: How is linear bearing maintained regularly?: Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question: Comparison of antirust ability of linear bearings?: Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Standard grade bearing steel is easy to rust, so it is necessary to apply anti-rust oil regularly.

Electronic & Electrical	Automotive	Lithium battery

LCD	Smart Phones	Semiconductor

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Linear Bushing Housing Units With Dowel Holes-Tall Blocks, Double

Part Number

Basic Information

Configure

Specification/Dimensions

Inscribed Circle Dia. dr(Ø)

Overall Length L(mm)

Outer Dia. D(Ø)

Height H(mm)

Dowel Hole Dimensions(mm)

type

CAD

Days to Ship

Specify Alterations

Frequently asked question (FAQ)

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)

Economy series Linear Bushing Box-Type Blocks, Wide Square, Single, Medium		Economy series Linear Bushing Box Type Blocks, Shaft Slip Type, Single/Double Type		Economy series Linear Bushing Box-Type Blocks, Wide Double, Medium Long, Long