Safety Valves, Control Valves（Supply Side, Plumbing Thread Nominal：1/2B）

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Standard Price:	SGD 160.48-
  Days to Ship:	4 Day(s) or more

• 

  Air Vent Valve TA-16 Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Its compact size enables mounting in a narrow space.
  
  [Features]
  • All parts are made of stainless steel, except for the valve body disk, gasket, and L-hose fitting (TA-16L), which ensures excellent corrosion resistance and durability.
  • The valve body disk is made of fluororubber, which ensures excellent sealing performance.
  • The TA-16 can easily be connected to an exhaust pipe by mounting the optional pipe connectors.

  CAD ：

  2D

  Standard Price:	SGD 152.11
  Days to Ship:	4 Day(s) or more

• 

  Safety Relief Valve, AL-150L Series

  YOSHITAKE

  [Features]
  · The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.
  · With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

  CAD ：

  2D

  Standard Price:	SGD 222.53
  Days to Ship:	8 Day(s) or more

• 

  Safety Relief Valve, AL-17 Series

  YOSHITAKE

  [Features]
  ・ The main part (valve body, valve seat) is made of stainless steel, so it has excellent corrosion resistance and durability
  ・ The down pressure can be adjusted by seat ring
  ・ It can support set pressures up to 1.6 MPa

  Standard Price:	SGD 306.15
  Days to Ship:	8 Day(s) or more

• 

  Micro Bellows Pilot Operation Steam Pressure Reducing Valve - RE3 Type

  MIYAWAKI

  [Features]
  ·It is a plus forged product, and is ultra-compact (approximately 50% lower in overall height) and lighter (approximately 60% lighter in weight) than conventional pressure reducing valves for steam, requiring less installation space.
  ·It can be easily adjusted by simply operating the handle (with lock mechanism).
  ·The unique stainless steel micro bellows and high-precision pilot valve have been developed to ensure reliable control.
  ·Its unique stainless steel micro bellows and overstress prevention mechanism (patent pending) provide outstanding durability.
  ·The amount of heat dissipated is reduced, making it excellent in energy saving and economic efficiency.
  ·A fluororesin (PTFE) gasket is used for the main parts, so it has good sealing performance, and it is easy to disassemble, assemble, and replace parts with commercially available tools.
  [Applications]
  ·Food industry, dyeing industry, cleaning industry, apparel industry, heating equipment, air conditioning equipment, etc.

  Standard Price:	SGD 836.85
  Days to Ship:	18 Day(s) or more

• 

  Relief Valve, AL-260 Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  Standard Price:	SGD 376.67
  Days to Ship:	8 Day(s) or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Standard Price:	SGD 567.41
  Days to Ship:	8 Day(s) or more

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Standard Price:	SGD 551.03
  Days to Ship:	4 Day(s) or more

• 

  Safety Relief Valve, AL-150TR Series

  YOSHITAKE

  A handle-operated valve for changing the pressure easily. Usable as a relief valve.
  
  [Features]
  · The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance.
  · Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.
  · The sealed construction prevents fluid from leaking outside.

  Standard Price:	SGD 316.93
  Days to Ship:	8 Day(s) or more

• 

  Air Vent Valve, TA-3/TA-6 Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Standard Price:	SGD 140.98
  Days to Ship:	6 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB9N Type

  MIYAWAKI

  [Features]
  ・ SCCV (Self Closing and Centering Valve) mechanism (): The valve is spherical and is not fixed to the shaft, but is designed to be held with some play left, right, front and back. Since the design structure holds the valve with play, even if the shaft slightly tilts due to the effect, etc., of condensed water when the valve is closed, the valve itself can flexibly close toward the center of the valve hole
  ・ QC (Quick-Close mechanism) mechanism (): When condensate flows from the inside of the trap body to the valve hole, the valve pushed down by the expansion force of the bimetal plate gradually closes the flow passage hole provided in the guide that shuts off the inside of the body and the valve hole. The valve gradually closes the flow passage hole, weakening the flow rate of the condensate passing through the valve opening, heats the bimetal more quickly, and promotes valve closing
  ・ Also available with convenient blow valve: There is also a type with a blow valve that removes scale and pipe dust that flows into and accumulates in the trap to the outside without disassembling the trap
  ・ If you would like to have a blow valve, please specify TB9BN-C or TB9BN-R
  ・ TB9BN-C can be used up to 0.98 MPa, and cock operation is easy
  ・ TB9BN-R can be used up to 1.6 MPa
  [Applications]
  ・ Ideal for steam tracing, steam transport pipes, tank heating, heating, etc.

  Standard Price:	SGD 453.26-
  Days to Ship:	10 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - RE1 Type

  MIYAWAKI

  [Features]
  ・ Ultra compact and lightweight design, about half the size and weight of conventional products
  ・ Reliable operation, effective in saving energy and improving productivity
  ・ Increased rated flow rate by devising original orifice plate
  ・ The control bellows by original device has excellent durability
  ・ The handle is made of special plastic, easy to grip and shape with excellent heat dissipation
  ・ Sharp and simple design. Plus forged body is perfect for beautiful styling
  ・ Improved gaskets make maintenance easier
  ・ One of the attractions of this performance is that it is inexpensive
  [Applications]
  ・ Cleaning / apparel industry
  ・ Food industry / dyeing industry
  ・ Ideal for heating equipment, sterilizers, rubber vulcanizers, etc.

  Standard Price:	SGD 618.60-
  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-2C Series

  YOSHITAKE

  Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

  CAD ：

  2D

  Standard Price:	SGD 322.72
  Days to Ship:	8 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-3C Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Standard Price:	SGD 216.11
  Days to Ship:	8 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Standard Price:	SGD 1,127.12
  Days to Ship:	8 Day(s) or more

• 

  Safety Relief Valve, AL-150TML Series

  YOSHITAKE

  Uses a lift valve lever mechanism for manually performing blowout inspections. The valve body/valve seat and adjustment spring are made from stainless steel. Anti-corrosive SCS14A is used in the main parts.

  Standard Price:	SGD 236.97
  Days to Ship:	8 Day(s) or more

• 

  Safety Relief Valve, AL-150T-N Series

  YOSHITAKE

  With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

  Standard Price:	SGD 223.69
  Days to Ship:	8 Day(s) or more

• 

  Safety Relief Valve, AL-150T Series

  YOSHITAKE

  [Features]
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.
  · The sealed construction prevents liquid from leaking outside.

  Standard Price:	SGD 189.77
  Days to Ship:	8 Day(s) or more

• 

  Intake Valve - Automatic Intake Valve - VB-10 Series

  YOSHITAKE

  [Features]
  • This valve increases atmospheric pressure by applying air to the pipe from which it is difficult to drain the water. Consequently, water is easily drained during water drainage operations.
  • As a 60-mesh strainer is built into the valve, there are no blockages due to scale.
  • In addition, even if water leaks due to blockage, water can be stopped by tightening the cap.
  • As the highest temperature is 95°C, warm water is also supported.
  • Can be mounted in both vertical and horizontal directions (Downward facing not possible).

  Standard Price:	SGD 78.98
  Days to Ship:	4 Day(s) or more

• 

  Intake and Exhaust Valves, TAV-2 Series

  YOSHITAKE

  Quickly prevents air from being sucked back when negative pressure occurs. Automatically works in response to air intake and exhaust requirements.

  CAD ：

  2D

  Standard Price:	SGD 187.83
  Days to Ship:	6 Day(s) or more

• 

  Air Vent Valve TA-16CVA, Series

  YOSHITAKE

  Provides a stable displacement across a wide range of operating pressures (0.01–1.0 MPa). Compact design permits installation in small space. Included check valve prevents air being sucked in on inlet side, even at negative pressure.

  CAD ：

  2D

  Standard Price:	SGD 206.15
  Days to Ship:	8 Day(s) or more

• 

  Air Vent Valve, TA-16 CVS Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets, check valves, check valve fitting are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  ・ TA-16CVS makes it easy to connect any exhaust pipe by installing optional pipe connection parts
  ・ Since it has a check valve, it does not suck air even when the inlet side is under negative pressure
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Standard Price:	SGD 202.29
  Days to Ship:	6 Day(s) or more

• 

  Ventilation Valve, TA-2 / TA-5 / TA-5F Series

  YOSHITAKE

  [Features]
  · Includes a rapid air discharge mechanism so during initial water flow, air inside the pipe is rapidly discharged, simplifying water passage.
  · Operates at a wide range of pressures compared to conventional air purge valves, from low to high pressures.
  · In the event of damage to the float valve body or valve seat surface after prolonged use, parts can be replaced from outside, simplifying maintenance and inspections.
  · TA-5 5F includes a main body made of bronze so production of rusty water is not a concern.
  · Negative pressure in the piping or tank automatically produces rapid suction of air, protecting against damage to piping due to vacuum.

  CAD ：

  2D

  Standard Price:	SGD 267.80
  Days to Ship:	19 Day(s) or more

• 

  Air Vent Valve TA-16L Series

  YOSHITAKE

  [Features]
  ・ All materials other than valve discs, gaskets and L-shaped hose fittings (TA-16L) are made of stainless steel
  ・ Wide operating pressure (0.01 to 1.0 MPa) gives stable displacement
  ・ Compact size allows installation in a small space
  ・ Excellent sealing performance because synthetic rubber is used for the valve disc
  [Applications]
  ・ building equipment, factory equipment, housing complex

  CAD ：

  2D

  Standard Price:	SGD 171.48
  Days to Ship:	19 Day(s) or more

• 

  RD-30 Type Pressure-Reducing Valve (for Vapor)

  VENN

  Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  ▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.
  ▪ Structure is little affected by dirt particles, and maintenance is easy.
  ▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

  Standard Price:	SGD 541.97
  Days to Ship:	8 Day(s) or more

• 

  Bimetallic Disc Temperature Control Trap TB7N Type

  MIYAWAKI

  [Features]
  ・ Adopts SCCV mechanism and QC mechanism
  ・ The SCCV (self-controlled seated valve) mechanism has an excellent sealing performance because the valve is free in the holder and is softly drawn to the center axis of the valve seat when the valve is closed
  ・ Achieve faster start-up
  ・ Quickly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Also functions as an air vent
  [Applications]
  ・ Steam transport pipe, trace line, etc.

  Standard Price:	SGD 483.49-
  Days to Ship:	18 Day(s) or more

• 

  Air Vent for Steam - AT9N Type

  MIYAWAKI

  It is an air vent for steam. [Features]·Will shorten equipment startup time as a result of quick air displacement.

  Standard Price:	SGD 490.81
  Days to Ship:	18 Day(s) or more

• 

  Air Vent for Steam - AW2 Type

  MIYAWAKI

  [Features]
  ·Rapid air evacuation shortens equipment start-up time.
  [Applications]
  ·It can be used for steam piping and various devices.

  Standard Price:	SGD 238.85
  Days to Ship:	18 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - REC1 Type

  MIYAWAKI

  [Features]
  ·It is made entirely of stainless steel and has excellent corrosion resistance.
  ·Maximum decompression ratio 30:1.
  ·Compact and lightweight design allows installation in narrow spaces.
  ·The pressure can be easily adjusted by operating the handle without using any tools.
  [Applications]
  ·food equipment.
  ·Medical equipment.
  ·Small processes such as bio-related equipment.

  Standard Price:	SGD 861.97
  Days to Ship:	18 Day(s) or more

Loading...