Tightening Fittings（Connection Types：Screw <=> Tube Connection）

• • On Sale Till 31/05/2024

  

  SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	31 Day(s) or more

• • On Sale Till 31/05/2024

  

  SUS316 Insert Fittings KFG2 Series, Union Elbow KFG2L

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	31 Day(s) or more

• 

  Corrosion Resistant - Tightening Fittings SUS316 - Straight

  PISCO

  SUS316 is used to provide all materials with excellent corrosion resistance.
  
  [Features]
  · SUS316 is used to provide all materials with excellent corrosion resistance.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · Air cleaned and packaged in a Class 1000 clean room .
  · Added inch sizes.
  · Improved selection.

  CAD ：

  2D

  Standard Price:	SGD 13.58-
  Days to Ship:	Same day or more

• • On Sale Till 31/05/2024

  

  SUS316 Insert Fittings KFG2 Series, Swivel Elbow KFG2V

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  Applicable tube outer diameter, metric p. 325; inch p. 331

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/05/2024

  

  Insert Fittings KF Series, Elbow Union KFL

  SMC

  A general model used for piping in the direction perpendicular to the female thread section. [Sleeve Material]·Nylon/brass

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Hose Fitting, Hose Nipple

  CHIYODA

  Compression fitting for air hose.
  [Features]
  ・ Nut type that does not easily leak air or water
  ・ The cap nut type securely seals the hose, and the hose fitting has one of the strongest pull-out strength
  ・ Made of brass, hard to break and rust resistant
  ・ Tube and hose can be replaced
  ・ Minimal flow rate loss
  ・ Due to the thread section sealing, piping is possible as it is.
  [Applications]
  ・ Most suitable for industrial water piping and air piping (equipment piping, air tools, etc.)

  CAD ：

  2D

  Standard Price:	SGD 3.44-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Connector (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ For metric size, there is a notch in the hex nut part

  CAD ：

  2D

  Standard Price:	SGD 4.42-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insertion Type (Brass Specifications) 90° Elbow (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ For metric size, there is a notch in the hex nut part

  CAD ：

  2D

  Standard Price:	SGD 6.59-
  Days to Ship:	4 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Half Elbows

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated half elbow type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 27.63-
  Days to Ship:	4 Day(s) or more

• 

  Junron Stainless Steel Fitting, Nipple

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Standard Price:	SGD 25.81-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass Specifications) Connector (Inch Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product

  CAD ：

  2D

  Standard Price:	SGD 3.12-
  Days to Ship:	4 Day(s) or more

• 

  MiSUMi Economy

  Compression Fitting Stainless Steel, Male Connector【5-10 Pieces Per Package】

  MISUMI

  Affordable, corrosion resistant, heat and pressure resistant.

  • Volume Discount

  Standard Price:	SGD 26.60-
  Days to Ship:	5 Day(s)

• 

  Hose Fitting, Hose Socket

  CHIYODA

  A cap-nut hose socket with high pull-out strength.

  CAD ：

  2D

  Standard Price:	SGD 4.07-
  Days to Ship:	4 Day(s) or more

• 

  Chemifit CP Series Connector【5 Pieces Per Package】

  NITTA

  [Features]
  ・ Threaded fitting made of polypropylene resin
  ・ Lightweight
  ・ Completely degrease-processed product
  ・ Parts are washed in a cleanroom
  ・ Excellent inner surface smoothness
  ・ Injection molded product, so the inner surface is smooth
  ・ Excellent dust-free and non-polluting property
  ・ Made of special polypropylene resin
  ・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

  CAD ：

  2D

  Standard Price:	SGD 14.40-
  Days to Ship:	4 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Straight

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated straight type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 13.14-
  Days to Ship:	Same day or more

• • On Sale Till 31/05/2024

  

  Insert Fittings KF Series, Male Connector KFH

  SMC

  A general model used for piping in the same direction from the female thread section. [Sleeve Material]·Nylon/brass

  • Volume Discount

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	31 Day(s) or more

• 

  Junron Brass Fitting, Nipple【1-20 Pieces Per Package】

  JUNKOSHA

  [Features]
  ・ Millimeter series brass fittings are compatible with Japanese Industrial Standard JIS B8381 "Pneumatic pipe fittings"
  ・ It has a mechanism that holds the tube insert part and tightens it with a sleeve and cap nut so that a reliable connection can be made.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ R (PT) Comes with a color thread seal for each thread size
  [Applications]
  ・ Pneumatic piping, water pressure, hydraulic pressure

  CAD ：

  2D

  Standard Price:	SGD 2.18-
  Days to Ship:	4 Day(s) or more

• 

  Quick-Seal Series, Insert Type (Stainless Steel Specifications) Connector (Inch Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product

  CAD ：

  2D

  Standard Price:	SGD 11.76-
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Fitting Male Connectors

  TRUSCO NAKAYAMA

  Features
  • Connected with a fluororesin tube.
  • Uses no seal to prevent corrosion that can occur where seals are normally used.
  
  Application
  • Perfect for clean air and pure water piping, chemicals, and corrosive gas piping.
  • Food, science, medical services, semi-conductor manufacturing, etc.

  Standard Price:	SGD 17.25-
  Days to Ship:	4 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Half Unions

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated half union type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 13.81-
  Days to Ship:	4 Day(s) or more

• 

  Junron Stainless Steel Elbow Fitting

  JUNKOSHA

  [Features]
  ・ As it is made of SUS316, which has high-corrosion resistance, it can be used in a wide temperature range from low temperature to high temperature.
  ・ It is designed dedicated for fluoropolymer/nylon resin tubes, so it does not cut the tube due to over-tightening of the cap nut.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ No need to control the tightening torque of the cap nut
  ・ Since SUS316 is used, it is a rust resistant fitting
  [Applications]
  ・ Piping of corrosion fluid
  ・ Hydraulic piping
  ・ Rust prevention piping

  CAD ：

  2D

  Standard Price:	SGD 34.92-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (with Brass Specifications) Swivel Nut Female Connector (mm Size)

  NITTA

  Brass specifications swivel nut female connector with fitting body (mm size), nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Only connectors are sealed.
  · Does not require sealing tape.
  JISB8381-1995 (flexible hose pipe fittings for pneumatic use) compliant product.

  CAD ：

  2D

  Standard Price:	SGD 10.29-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Brass) Female Connector (Inch Size)

  NITTA

  A 3-point brass female connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  CAD ：

  2D

  Standard Price:	SGD 5.42-
  Days to Ship:	6 Day(s) or more

• 

  Chemifit CP Series, 90° Elbow【5 Pieces Per Package】

  NITTA

  Inner surface of 90° elbow is smooth due to injection molding. Also, it is excellent in non-dusting and non-polluting. A special polypropylene resin is used as a base material.

  CAD ：

  2D

  Standard Price:	SGD 19.95-
  Days to Ship:	4 Day(s) or more

• 

  Insert Fittings KF Series, Swivel Extended Elbow KFW

  SMC

  [Features]
  · Used for piping in directions perpendicular to the female thread.
  · Extended swivel type that can swivel in any direction, facilitating three-dimensional piping.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Self-Align Fittings H/DL/L/LL Series Swivel Elbow L

  SMC

  A tightening-type fitting with a strong edge, ensuring external damage will not easily lead to impaired functionality.
  [Features]
  · A non-directional type sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · A swivel type that can be positioned in any direction.
  [Applications]
  · Used for right-angle piping from female threads.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Elbows

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated elbow type fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 22.91-
  Days to Ship:	Same day or more

• 

  Couplings with Tube Insert - Nut and Sleeve Integrated Type - Elbows

  MISUMI

  [Features]Fluids used are air, water or oil, Elbow type fitting with inserts for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 4.04-
  Days to Ship:	Same day or more

• 

  Quick Seal Series Insert Type (Stainless Steel Specification) Connector (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance

  CAD ：

  2D

  Standard Price:	SGD 13.46-
  Days to Ship:	4 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Sockets

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated socket fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.90-
  Days to Ship:	4 Day(s) or more

• 

  Couplings with Tube Insert - Nut and Sleeve Integrated Type - Connectors

  MISUMI

  [Features]Fluids used are air, water or oil, Connector type fitting with inserts for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 2.36-
  Days to Ship:	Same day or more

• 

  Corrosion Resistant SUS316 Tightening Fitting, Elbow

  PISCO

  [Features]
  · SUS316 with excellent corrosion resistance is used for all materials.
  · The sleeveless design eliminates worries about forgetting to attach the sleeve or losing it, etc.
  ·Air cleaning and packaging in a cleanroom (class 1000).
  ·Inch sizes are added. More varieties have also been added.
  ·Ideal for chemical piping and other special environments in sectors that require a focus on airtightness.
  ·Polyurethane tubes can also be used.
  [Applications]
  ·Chemical, medical, pharmaceutical and food-related applications, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 23.76-
  Days to Ship:	Same day or more

• 

  SUS316 Fitting, Male Elbow

  CHIYODA

  Full decreasing treatment for cleanliness. Male elbows.

  CAD ：

  2D

  Standard Price:	SGD 24.85-
  Days to Ship:	9 Day(s) or more

• 

  Junron Brass Fitting Elbow【1-20 Pieces Per Package】

  JUNKOSHA

  [Features]
  ・ Millimeter series brass fittings are compatible with Japanese Industrial Standard JIS B8381 "Pneumatic pipe fittings"
  ・ It has a mechanism that holds the tube insert part and tightens it with a sleeve and cap nut so that a reliable connection can be made.
  ・ There is no abnormality in the connection part until the tube breaks
  ・ R (PT) Comes with a color thread seal for each thread size
  [Applications]
  ・ Pneumatic piping, water pressure, hydraulic pressure

  CAD ：

  2D

  Standard Price:	SGD 4.26-
  Days to Ship:	4 Day(s) or more

• 

  Junlon Stainless Steel Fitting Female Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  CAD ：

  2D

  Standard Price:	SGD 36.34-
  Days to Ship:	4 Day(s) or more

• 

  Quick Seal Series Insert Type (Stainless Steel Type) 90° Elbow (Metric Size)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ Since it is made of SUS304, it has excellent corrosion resistance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance

  CAD ：

  2D

  Standard Price:	SGD 31.77-
  Days to Ship:	4 Day(s) or more

• 

  QuickSeal Series, Insertion Type (Brass Specification) 90° Elbow (Size in Inches)

  NITTA

  [Features]
  ・ It is a threaded type
  ・ 3 point type of body, nut and sleeve
  ・ Delivers strong sealing performance
  ・ Body and insert are integrated
  ・ Excellent negative pressure performance
  ・ JIS B 8381-1995 (pneumatic flexible pipe fittings) compliant product
  ・ Excellent pressure resistance and vibration resistance
  ・ Only the connector is sealed
  ・ No need to wrap sealing tape
  ・ For inch size, the color of nylon sleeve is black

  CAD ：

  2D

  Standard Price:	SGD 5.32-
  Days to Ship:	4 Day(s) or more

• 

  SUS316, Insert Pipe Fitting, KFG2 Series, Female Union

  SMC

  [Features]
  ・ Compact and weight reduced
  ・ Lubrication-free
  ·Steam can be used
  · Compliant with the Food Sanitation Act of Japan

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• • On Sale Till 31/05/2024

  

  Self-Align Fittings H/DL/L/LL Series Male Connector H

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · A non-directional type metal sleeve tightening fitting.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  · Can be used with soft copper pipes.
  [Applications]
  · Used for piping in the same direction from female threads.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Self-Align Fittings H/DL/L/LL Series Male Elbow DL

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for piping in the same direction from female threads.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Couplings for Tubes - Nut and Sleeve Integrated Type - Nipples

  MISUMI

  [Features]·The fluids used are air and water. ·Nut and sleeve integrated nipple fitting for tubes.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 5.57-
  Days to Ship:	Same day or more

• 

  MiSUMi Economy

  Compression Fittings Brass, Straight Male Connector【5-20 Pieces Per Package】

  MISUMI

  Temperature and pressure resistance, quality assurance, super strong sealing.

  • Volume Discount

  Standard Price:	SGD 17.30-
  Days to Ship:	5 Day(s)

• 

  Brass Tightening Fitting - Straight - for Sputtering Resistance

  PISCO

  Special brass is used for metal body to greatly improve corrosion resistance to water.
  
  [Features]
  · Special brass is used for metal body.
  · Corrosion resistance to water has been greatly increased.
  · Ideal for use in the automobile industry and for mold temperature control.
  · Never worry about forgetting or losing the sleeve again with this no-sleeve design.
  · A wide variety is available to support a wide range of applications.
  · 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.

  CAD ：

  2D

  Standard Price:	SGD 2.76-
  Days to Ship:	Same day or more

• 

  Corrosion-Resistant SUS316 Tightening Fitting, Female Straight

  PISCO

  Totally made of corrosion-resistant SUS316.

  CAD ：

  2D

  Standard Price:	SGD 14.78-
  Days to Ship:	Same day or more

• 

  SUS316 Fitting Male Connectors

  CHIYODA

  Full decreasing treatment for cleanliness. Male connectors.

  CAD ：

  2D

  Standard Price:	SGD 14.85-
  Days to Ship:	9 Day(s) or more

Loading...