(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our operating hours are from 9:00~15:00 during the upcoming Hari Raya Haji Holiday 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Carbide Radius End Mills（Coating：For High Hardness (Silicon Group)）
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 4-flute radius end mill that achieves high feed/high speed machining- High-Hardness Steel
- 4 Flutes
- SR
Standard Price: SGD 35.32- Days to Ship: 4 Day(s) or more -
UNION TOOL
[Features]
· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
· The optimized corner radius size enables processing with larger feed than conventional
· Seamless Corner Radius Shape
· High hardness materials up to 65 HRC can also be machinedStandard Price: SGD 73.77- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Standard Price: SGD 66.54- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Non-Coated
- General Steel
Days to Ship: 12 Day(s) or more -
HLRS2000 HM Coated 2-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeStandard Price: SGD 45.94- Days to Ship: 4 Day(s) or more -
Power Radius End Mill MSXH440R
NS TOOL
Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining
Standard Price: SGD 69.44- Days to Ship: 4 Day(s) or more -
MHDH645R 6-Flute Radius-End Mill for High-Hardness
NS TOOL
Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)
Standard Price: SGD 141.72- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths
- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: SGD 94.36- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / short model
MISUMI
[Features]
·Multi-function end mill radius type.
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills WX Super Coated High-precision
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Standard Price: SGD 65.20- Days to Ship: 3 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius
OSG
Pencil neck radius end mill that achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials.
Standard Price: SGD 163.02- Days to Ship: 4 Day(s) or more -
HLRS4000 HM Coated 4-Flute Long Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Rigidity-oriented blade shape provides long life even when machining high hardness materials
· Capable of stable machining for both dry and wet type
· New HARDMAX coating adopted to improve oxidation resistance.Standard Price: SGD 53.97- Days to Ship: 4 Day(s) or more -
CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist
UNION TOOL
[Features]
· High Efficiency 3-Flute Long Neck Radius (Short Blade)
· 40° Torsion
· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)Standard Price: SGD 103.49- Days to Ship: 9 Day(s) -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: SGD 91.13- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Standard Price: SGD 85.60- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: SGD 58.97- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Standard Price: SGD 87.76- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Standard Price: SGD 78.78- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: SGD 82.77- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type
MISUMI
[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Standard Price: SGD 111.00- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
MISUMI
[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45°, regular model
MISUMI
[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]
·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Standard Price: SGD 46.90- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]
·General purpose 2-flute end mill with regular flute length type with cutting edge radius
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type
MISUMI
[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Standard Price: SGD 56.96- Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill 4-Flute / Stub Type
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute / short model
MISUMI
[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute / regular model
MISUMI
[Features]
·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]
·Multi-function long neck radius with high feed capability and excellent durability
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide long neck radius end mill, 4-flute / long neck model
MISUMI
[Features]
·Radius (R) accuracy of ±5 µm (compared to the manufacturer measurements) enables high precision deep cavity milling
·By adopting 4-flute shape, it is possible to process at high feed setting compared to 2-flute
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]
·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Standard Price: SGD 88.92- Days to Ship: 4 Day(s) or more -
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Taper neck is effective in suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Standard Price: SGD 116.38- Days to Ship: 4 Day(s) or more -
MISUMI
[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Days to Ship: 4 Day(s) or more -
TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type
MISUMI
The popular radius type for stainless steel processing is also effective in preventing chipping
- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Standard Price: SGD 113.68- Days to Ship: 4 Day(s) or more -
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Standard Price: SGD 93.01- Days to Ship: 4 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machiningStandard Price: SGD 44.27- Days to Ship: 4 Day(s) or more -
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· A tool with short blade length that suppresses chatter during machining- High-Hardness Steel
- 3 Flutes
- SR
Standard Price: SGD 1,465.10 Days to Ship: 4 Day(s) or more -
Micro Grain Carbide End Mills PHOENIX Deep-Feed Radius
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Standard Price: SGD 198.78- Days to Ship: 3 Day(s)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Type |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | UNION TOOL | MISUMI | MISUMI | MISUMI | UNION TOOL | NS TOOL | NS TOOL | MISUMI | MISUMI | OSG | OSG | UNION TOOL | UNION TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG |
| Product Series | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide radius end mill, 4-flute, 45° spiral / short model | Micro Grain Carbide End Mills WX Super Coated High-precision | Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type | TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model | TSC series carbide radius end mill, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, 4-flute, 45°, regular model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type | TSC series carbide long neck radius end mill, 2-flute, long neck model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | TSC series carbide long neck radius end mill, 4-flute / long neck model | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model | TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | |||||||||||||||||
| Days to Ship | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 12 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 9 Day(s) | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
| Blade diameter (D)(φ) | 3 ～ 10 | 2 ～ 12 | 3 ～ 12 | 3 ～ 20 | 2.5 ～ 12 | 0.4 ～ 6 | 3 ～ 12 | 5 ～ 12 | 4 ～ 16 | 3 ～ 20 | 0.2 ～ 4 | 2 ～ 12 | 0.8 ～ 6 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 10 | 2 ～ 20 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 22 | 3 ～ 12 | 3 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 20 | 1 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 12 | 1 ～ 12 | 0.2 ～ 6 | 1 ～ 4 | 1 ～ 6 | 0.2 ～ 3 | 3 ～ 12 | 3 ～ 12 | 6 ～ 12 | 3 ～ 12 | 4 ～ 12 | 3 ～ 12 | 4 ～ 10 | 6 ～ 20 |
| R Size(mm) | 0.2 ～ 1.5 | 0.3 ～ 4 | 0.75 ～ 3 | 0.2 ～ 2 | 0.1 ～ 3 | 0.05 ～ 1 | 0.3 ～ 3 | 0.2 ～ 2 | 1 ～ 3 | 0.2 ～ 3 | 0.05 ～ 1 | 0.5 ～ 2 | 0.05 ～ 1 | 0.1 ～ 0.5 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 3 | 0.3 ～ 1 | 0.3 ～ 1 | 0.5 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.5 ～ 1 | 0.2 ～ 3 | 0.2 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.3 ～ 1 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.2 ～ 1 | 0.05 ～ 1 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.8 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 1 ～ 2 | 0.2 ～ 1 | 0.3 ～ 1 | 1.5 ～ 3 |
| Blade length (ℓ)(mm) | 7.5 ～ 30 | 2 ～ 12 | 1.2 ～ 5 | 5 ～ 56 | 5 ～ 48 | 0.4 ～ 6 | 8 ～ 26 | 10 ～ 24 | 6 ～ 24 | 5 ～ 38 | 0.15 ～ 4 | 3 ～ 18 | 0.48 ～ 4.8 | 3 ～ 15 | 2 ～ 12 | 4 ～ 24 | 2 ～ 10 | 4 ～ 40 | 4.5 ～ 18 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 26 | 4.5 ～ 30 | 4.5 ～ 18 | 5 ～ 56 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 40 | 3 ～ 60 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 24 | 3 ～ 36 | 0.16 ～ 12 | 0.8 ～ 3.2 | 1.5 ～ 12 | 0.16 ～ 6 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 12 | 7 ～ 18 | 8 ～ 24 | 7.5 ～ 38 | 10 ～ 25 | 12 ～ 40 |
| Number of flutes(sheet) | 4 | 4 | 4 | 3 | 2 ～ 4 | 2 | 4 | 6 | 4 | 4 | 2 ～ 4 | 3 | 4 | 3 | 3 | 3 | 4 | 4 | 3 | 4 | 3 | 3 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 3 | 4 | 2 | 3 | 4 | 6 | 3 | 3 | 4 | 3 | 3 |
| Overall Length (L)(mm) | 45 ～ 80 | 70 ～ 120 | 60 ～ 110 | 60 ～ 130 | 40 ～ 100 | 50 ～ 120 | 60 ～ 80 | 60 ～ 80 | 70 ～ 180 | 60 ～ 110 | 50 ～ 110 | 60 ～ 220 | 50 ～ 120 | 38 ～ 120 | 50 ～ 100 | 50 ～ 100 | 50 ～ 90 | 50 ～ 130 | 40 ～ 65 | 40 ～ 65 | 60 ～ 100 | 60 ～ 100 | 80 ～ 200 | 60 ～ 100 | 60 ～ 130 | 35 ～ 60 | 40 ～ 75 | 40 ～ 110 | 45 ～ 125 | 35 ～ 60 | 40 ～ 75 | 40 ～ 75 | 45 ～ 85 | 40 ～ 100 | 45 ～ 70 | 40 ～ 100 | 40 ～ 100 | 80 ～ 160 | 80 ～ 160 | 60 ～ 85 | 60 ～ 100 | 70 ～ 140 | 45 ～ 100 | 50 ～ 80 | 80 ～ 150 |
| work material | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] |
| Shank diameter (d)(mm) | 3 ～ 10 | 3 ～ 12 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 6 | 6 ～ 12 | 6 ～ 12 | 4 ～ 16 | 6 ～ 20 | 4 ～ 6 | 6 ～ 20 | 4 ～ 6 | 3 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 10 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 16 | 6 ～ 16 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 3 ～ 12 | 4 ～ 10 | 6 ～ 20 |
| Underneck length (ℓ1)(mm) | - | 6 ～ 36 | 7.5 ～ 24 | 26 ～ 92 | - | 1 ～ 60 | - | - | 28 ～ 120 | 18 ～ 73 | 0.5 ～ 60 | 10 ～ 160.8 | 2 ～ 48 | 6 ～ 54 | - | - | - | - | - | - | 14 ～ 68 | 18 ～ 70 | 10 ～ 18 | 14 ～ 68 | 26 ～ 92 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 | 1 ～ 40 | 6 ～ 30 | 3 ～ 40 | 1 ～ 60 | 24 ～ 105 | 24 ～ 105 | 11 ～ 55 | - | 28 ～ 90 | - | - | - |
| Machining Application | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Groove | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Plunging (Z feed) |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) |
| Type | radius | Long-Neck Radius | High-Feed Radius | radius | radius | Long-Neck Radius | radius | radius | Long-Neck Radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | Tapered neck radius | radius | radius | Long-Neck Radius | radius | radius | radius |
| Torsion Angle (θ) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) |
| R Precision(μm) | ±10 | - | ±0.02 | ±0.01 | ±0.02 | - | - | 0.01～-0.01 | ±0.015 | ±0.01 | - | - | - | - | ±0.015 | ±0.015 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.02 | ±0.02 | ±0.015 | ±20 | ±10 | - |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
R Size(mm)
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Manufacturer
-
- UNION TOOL (7)
- NS TOOL (5)
- OSG (5)
- OKAZAKI SEIKO (1)
- Poulten&Graf (0)
- KYOWA SEIKO (0)
- ATOM (0)
- WATERMILLS (0)
- DIJET (0)
- VAN HOORN (0)
- GUHRING (0)
- SANDVIK (0)
- SANKO MFG (0)
- TAIYO-TOOL (0)
- NACHI(FUJIKOSHI) (0)
- 7 LEADERS (0)
- THE CUT (0)
CAD
-
- 2D
- 3D
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?