(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting
Suitable not only for general milling but also for mold making, first recommendation for roughing
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | blade diameter D (φ) | Finish category | Overall length (L) (mm) | Shank diameter (d) (mm) | Number of flutes (sheet) | Maximum Cutting Depth (Ad) (mm) | Maximum Engine Speed n max | Dimensions az (mm) | Details Type | Dimensions Dc (mm) | Mass (kg) | Specifications | Tip Size (mm) | Blade distribution | Other Processing Applications |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 903.20 | 1 Piece(s) | 10 Day(s) | 50 mm | Rough and medium rough processing | 50 | 22 | 5 | 6 | 18,800 | 3.7 | Arbor mounted | 38 | 0.7 | Extra-cross pitch (large number of blades) | 12 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 864.00 | 1 Piece(s) | 10 Day(s) | 50 mm | Finishing | 50 | 22 | 3 | 6 | 18,800 | 3.7 | Arbor mounted | 38 | 0.7 | Coarse pitch (low number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 929.70 | 1 Piece(s) | 10 Day(s) | 50 mm | Rough and medium rough processing | 50 | 22 | 4 | 6 | 18,800 | 3.7 | Arbor mounted | 38 | 0.7 | Cross pitch (medium number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 903.20 | 1 Piece(s) | 10 Day(s) | 52 mm | Rough and medium rough processing | 50 | 22 | 5 | 6 | 18,000 | 3.7 | Arbor mounted | 40 | 0.4 | Extra-cross pitch (large number of blades) | 12 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 864.00 | 1 Piece(s) | 10 Day(s) | 52 mm | Finishing | 50 | 22 | 3 | 6 | 18,000 | 3.7 | Arbor mounted | 40 | 0.4 | Coarse pitch (low number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 929.70 | 1 Piece(s) | 10 Day(s) | 52 mm | Rough and medium rough processing | 50 | 22 | 4 | 6 | 18,000 | 3.7 | Arbor mounted | 40 | 0.4 | Cross pitch (medium number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 957.30 | 1 Piece(s) | 10 Day(s) | 63 mm | Rough and medium rough processing | 50 | 22 | 4 | 8 | 15,300 | 4.9 | Arbor mounted | 47 | 0.5 | Cross pitch (medium number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,042.70 | 1 Piece(s) | 10 Day(s) | 66 mm | Rough and medium rough processing | 50 | 27 | 5 | 8 | 14,500 | 4.9 | Arbor mounted | 50 | 0.9 | Extra-cross pitch (large number of blades) | 16 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 957.30 | 1 Piece(s) | 10 Day(s) | 66 mm | Rough and medium rough processing | 50 | 27 | 4 | 8 | 14,500 | 4.9 | Arbor mounted | 50 | 0.9 | Cross pitch (medium number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,021.70 | 1 Piece(s) | 10 Day(s) | 63 mm | Rough and medium rough processing | 50 | 22 | 5 | 6 | 16,200 | 3.7 | Arbor mounted | 51 | 0.8 | Extra-cross pitch (large number of blades) | 12 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 995.50 | 1 Piece(s) | 10 Day(s) | 63 mm | Finishing | 50 | 22 | 3 | 6 | 16,200 | 3.7 | Arbor mounted | 51 | 0.8 | Coarse pitch (low number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,062.50 | 1 Piece(s) | 10 Day(s) | 63 mm | Rough and medium rough processing | 50 | 22 | 4 | 6 | 16,200 | 3.7 | Arbor mounted | 51 | 0.8 | Cross pitch (medium number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,128.30 | 1 Piece(s) | 10 Day(s) | 80 mm | Finishing | 50 | 27 | 3 | 10 | 10,600 | 6.1 | Arbor mounted | 60 | 1.1 | Coarse pitch (low number of blades) | 20 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,072.90 | 1 Piece(s) | 10 Day(s) | 80 mm | Rough and medium rough processing | 50 | 27 | 4 | 10 | 10,600 | 6.1 | Arbor mounted | 60 | 1.1 | Cross pitch (medium number of blades) | 20 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 1,192.60 | 1 Piece(s) | 10 Day(s) | 80 mm | Rough and medium rough processing | 50 | 27 | 6 | 8 | 13,100 | 4.9 | Arbor mounted | 64 | 1 | Extra-cross pitch (large number of blades) | 16 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 1,192.60 | 1 Piece(s) | 10 Day(s) | 80 mm | Finishing | 50 | 27 | 4 | 8 | 13,100 | 4.9 | Arbor mounted | 64 | 1 | Coarse pitch (low number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,261.30 | 1 Piece(s) | 10 Day(s) | 80 mm | Rough and medium rough processing | 50 | 27 | 5 | 8 | 13,100 | 4.9 | Arbor mounted | 64 | 1 | Cross pitch (medium number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,192.60 | 1 Piece(s) | 10 Day(s) | 80 mm | Finishing | 50 | 27 | 4 | 6 | 14,000 | 3.7 | Arbor mounted | 68 | 0.8 | Coarse pitch (low number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,328.30 | 1 Piece(s) | 10 Day(s) | 80 mm | Rough and medium rough processing | 50 | 27 | 6 | 6 | 14,000 | 3.7 | Arbor mounted | 68 | 0.8 | Cross pitch (medium number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,394.10 | 1 Piece(s) | 10 Day(s) | 100 mm | Finishing | 63 | 32 | 4 | 10 | 9,200 | 6.1 | Arbor mounted | 80 | 1.4 | Coarse pitch (low number of blades) | 20 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,380.90 | 1 Piece(s) | 10 Day(s) | 100 mm | Rough and medium rough processing | 63 | 32 | 6 | 10 | 9,200 | 6.1 | Arbor mounted | 80 | 1.4 | Cross pitch (medium number of blades) | 20 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 1,524.06 | 1 Piece(s) | 10 Day(s) | 100 mm | Rough and medium rough processing | 50 | 32 | 6 | 8 | 11,400 | 4.9 | Arbor mounted | 84 | 1.3 | Cross pitch (medium number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,394.10 | 1 Piece(s) | 10 Day(s) | 100 mm | Finishing | 50 | 32 | 4 | 6 | 12,300 | 3.7 | Arbor mounted | 88 | 1.6 | Coarse pitch (low number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,524.06 | 1 Piece(s) | 10 Day(s) | 100 mm | Rough and medium rough processing | 50 | 32 | 6 | 6 | 12,300 | 3.7 | Arbor mounted | 88 | 1.6 | Cross pitch (medium number of blades) | 12 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,842.90 | 1 Piece(s) | 10 Day(s) | 125 mm | Finishing | 63 | 32 | 5 | 10 | 8,000 | 6.1 | Arbor mounted | 105 | 2.2 | Coarse pitch (low number of blades) | 20 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,739.10 | 1 Piece(s) | 10 Day(s) | 125 mm | Rough and medium rough processing | 63 | 32 | 6 | 10 | 8,000 | 6.1 | Arbor mounted | 105 | 2.2 | Cross pitch (medium number of blades) | 20 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 1,842.90 | 1 Piece(s) | 10 Day(s) | 125 mm | Finishing | 50 | 32 | 5 | 8 | 10,000 | 4.9 | Arbor mounted | 109 | 2.1 | Coarse pitch (low number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 1,928.10 | 1 Piece(s) | 10 Day(s) | 125 mm | Rough and medium rough processing | 50 | 32 | 6 | 8 | 10,000 | 4.9 | Arbor mounted | 109 | 2.1 | Cross pitch (medium number of blades) | 16 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 2,381.90 | 1 Piece(s) | 10 Day(s) | 160 mm | Finishing | 63 | 40 | 6 | 10 | 6,900 | 6.1 | Arbor mounted | 140 | 3.5 | Coarse pitch (low number of blades) | 20 | Unequal division | Profiling, axial direction / plunge milling | ||
SGD 2,265.50 | 1 Piece(s) | 10 Day(s) | 160 mm | Rough and medium rough processing | 63 | 40 | 8 | 10 | 6,900 | 6.1 | Arbor mounted | 140 | 3.5 | Cross pitch (medium number of blades) | 20 | Equal division | Profiling, axial direction / plunge milling | ||
SGD 1,328.30 | 1 Piece(s) | 10 Day(s) | 80 mm | Rough and medium rough processing | 50 | 25.4 | 6 | 6 | 14000 | 3.7 | Arbor Mounting (FMA Type) | 68 | 1 | Cross Pitch (Medium Number of Blades) | 12 | Equally Divided | Profiling, Axial Direction / Plunge Milling | ||
SGD 1,524.06 | 1 Piece(s) | 8 Day(s) | 100 mm | Rough and medium rough processing | 63 | 31.75 | 6 | 6 | 12300 | 3.7 | Arbor Mounting (FMA Type) | 88 | 1.5 | Cross Pitch (Medium Number of Blades) | 12 | Equally Divided | Profiling, Axial Direction / Plunge Milling | ||
SGD 2,374.48 | 1 Piece(s) | 10 Day(s) | 160 mm | Rough and medium rough processing | 63 | 50.8 | 8 | 10 | 6900 | 6.1 | Arbor Mounting (FMA Type) | 140 | 5 | Cross Pitch (Medium Number of Blades) | 20 | Equally Divided | Profiling, Axial Direction / Plunge Milling |
Loading...
Basic Information
| Machining Application | Plane / Side / Groove | work material | general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium | Mounting Method | Arbor |
|---|---|---|---|---|---|
| Compatible Tip Material | Carbide Coat | Dimension L3(mm) | - |
Specification/Dimensions
-
blade diameter D(φ)
-
Finish category
- Rough and medium rough processing
- Finishing
-
Overall length (L)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Maximum Cutting Depth (Ad)(mm)
-
Maximum Engine Speed n max
-
Dimensions az(mm)
- 3.7
- 4.9
- 6.1
-
Details Type
-
Dimensions Dc(mm)
-
Mass(kg)
-
type
- R200-Q
- RA200-J
Days to Ship
-
- All
- 8 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?