(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our operating hours are from 9:00~15:00 during the upcoming Hari Raya Haji Holiday 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
4-Port Solenoid Valve, Body Ported, VZ1000 Series (VZ1120-1DO-M5-F)
SMC Solenoid Valve.
[Features]
· Suitable for cylinder actuation (up to ø16)
· Compact size with a width of just 15 mm
· Low power consumption: 1.8 W DC
(i)Caution
- Product images may be representative. Refer to the manufacturer's catalog for details.
Japanese Only
Part Number
Configured Part Number is shown.
VZ1120-1DO-M5-F
- Download
Product Details - CAD Data unavailable
4-Port Solenoid Valve, Body Ported, VZ1000 Series Specifications
VZ1000 Series external appearance
2-position single
Specifications Table
| Valve type | Pilot operated 4-port switching solenoid valve |
|---|---|
| Usable Fluids | Air |
| Operating Pressure Range MPa | 0.15 to 0.7 |
| Ambient Temperature and Operating Fluid Temperature °C | -10 to 50 (no freezing) |
| *1: Response time (ms) (at 0.5 MPa) | 15 or less |
| Maximum Operating Frequency Hz | 15 |
| Effective area | See table below |
| Lubrication | Not required |
| Manual Operation | Non-locking, push type |
| Exhaust throttle | Not available |
| Mounting Orientation | Free |
| *2: Impact Resistance / Vibration Resistance: m/s2 | 300/50 |
| Enclosure | Dust-proof |
*1: Based on JIS B 8375-1981 dynamic performance testing. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 1,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
Effective area / Weight table
(Unit: mm)
| Valve Model Numbers | Switching Method | Effective area (mm2) | Piping connection port diameter | Weight g | |
|---|---|---|---|---|---|
| VZ1120-□□□-M5 | 2-position single solenoid | 1→4 | 0.6 | M5 × 0.8 | 90 |
| 2→3 | 1.5 | ||||
| 1→2 | 1.0 | ||||
| 4→3 | 0.9 | ||||
Structure Drawing
When not energized
When energized
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| (1) | Body | ZDC | Platinum silver |
| (2) | Push Rod | Resin | - |
| (3) | EXH poppet | NBR | - |
| (4) | Back-up spring | SUS | - |
| (5) | V seal | FKM | - |
| (6) | Retainer assembly | Brass, NBR | - |
| (7) | Poppet Spring | SUS | - |
Replacement Parts
| Number | Part name | Material | Part number | Note |
|---|---|---|---|---|
| (8) | Solenoid assembly | Epoxy, SUS | DXT170-A-□□□ | - |
| (9) | O-ring | NBR | KA00481 | Same as VZ3000 Series Same as VZ5000 Series |
External Dimensions
Grommet (G) (H)
(Unit: mm)
VZ1120-□(G, H)□-M5 dimensional drawings
L-type plug connector (L)
(Unit: mm)
VZ1120-□L□-M5 dimensional drawing
M-type plug connector (M)
(Unit: mm)
VZ1120-□M□-M5 dimensional drawing
DIN terminal (D)
(Unit: mm)
VZ1120-□D□-M5 dimensional drawing
*The numbers in boxes are for with a light and surge voltage suppressor
Precautions
- *Product images may be representative images.
- *See the SMC catalog for product information other than that detailed above.
| Part Number |
|---|
| VZ1120-1DO-M5-F |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Voltage | Lead wire electrical entry | Indicator light / Surge voltage suppressor | CE compliant | Option |
|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | Quote | AC100V | DIN terminal without connector | None | None | With foot bracket |
Loading...
Basic Information
| Type | Solenoid Valves | Application | Single Use | Number of Ports | 4-Port Valve |
|---|---|---|---|---|---|
| Mounting Orientation | Direct | Specifications | Standard / Low Current | Number of Solenoids | Single |
| Switching Type | 2-Position Exhaust | Status at Power Off | Self-Recovery (Spring Return) | Pipe Port Type | M |
| Plumbing Thread Nominal | M5 | Applicable Cylinder Dia.(Ø) | 16 or less | Plumbing | Direct Plumbing |
| Driving Type | Pilot Type Spool | CV Value | 0.05 | Seal Type | Soft Seal |
| Pressure Rating(MPa) | 0.15 to 0.7 | Pilot Air Supply | Internal | Manual Switch | Non-Locking |
Please check the type/dimensions/specifications of the part VZ1120-1DO-M5-F in the 4-Port Solenoid Valve, Body Ported, VZ1000 Series series.
Specification/Dimensions
-
type
- VZ1000
-
Voltage
- DC12V
- DC24V
- AC100V
- AC110V
- AC200V
- AC220V
-
Lead wire electrical entry
- Grommet lead wire length: 300 mm
- Grommet lead wire length: 600 mm
- DIN terminal with connector
- DIN terminal without connector
- L plug connector with lead wire
- L plug connector without lead wire
- L plug connector, without connector
- M plug connector with lead wire
- M plug connector without lead wire
- M plug connector, without connector
-
Indicator light / Surge voltage suppressor
- None
- With indicator light and surge voltage suppressor
- With surge voltage suppressor
-
CE compliant
- None
- Yes
-
Option
- None
- With foot bracket
Days to Ship
-
- All
- 31 Day(s) or Less
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| VZ1120-1D-M5-F |
| VZ1120-1D-M5-F-Q |
| VZ1120-1D-M5-Q |
| VZ1120-1DO-M5-F-Q |
| VZ1120-1DOS-M5-F |
| VZ1120-1DOS-M5-Q |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Voltage | Lead wire electrical entry | Indicator light / Surge voltage suppressor | CE compliant | Option |
|---|---|---|---|---|---|---|---|---|---|
SGD 180.48 | 1 Piece(s) | 46 Day(s) | AC100V | DIN terminal with connector | None | None | With foot bracket | ||
SGD 187.95 | 1 Piece(s) | 46 Day(s) | AC100V | DIN terminal with connector | None | Yes | With foot bracket | ||
- | 1 Piece(s) | Quote | AC100V | DIN terminal with connector | None | - | None | ||
- | 1 Piece(s) | Quote | AC100V | DIN terminal without connector | None | Yes | With foot bracket | ||
- | 1 Piece(s) | Quote | AC100V | DIN terminal without connector | With surge voltage suppressor | None | With foot bracket | ||
- | 1 Piece(s) | Quote | AC100V | DIN terminal without connector | With surge voltage suppressor | Yes | None |
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?