(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Union Tee KGT Stainless Steel One-Touch Fitting, KG Series.
- Volume Discount
SMC One-Touch fitting.
[Features]
· Stainless steel specifications for use in corrosive environments.
· SUS303 is used for metal parts.
· Suitable for use in CRT production lines where contact with copper must be avoided, as well as cleaning of food processing machines where water or salt water splashes.
· Suitable for use inside clean rooms where discoloration of copper materials and dust caused by corrosion must be avoided.
[Applications]
· Used to connect tubes in both 90° directions.
(i)Caution
- For materials and specification details, please refer to the catalog.
- Product images may be representative images. Refer to the catalog for shape details.
Union Tee: KGT Outline Drawing And Dimensions
Union Tee: KGT outline drawing
| Applicable tubing outer diameter (mm) | Model | øDNote 1) | L | Q | M | Effective cross-sectional areaNote 2) (mm2) | Weight g | |
|---|---|---|---|---|---|---|---|---|
| Nylon | Urethane | |||||||
| 4 | KGT04-00 | 10.4 | 18 | 4.5 | 16 | 6.4 | 4.4 | 7 |
| 6 | KGT06-00 | 12.8 | 20 | 5.3 | 17 | 13.4 | 10.6 | 10 |
| 8 | KGT08-00 | 15.2 | 23 | 6 | 18.5 | 25.6 | 17.7 | 15 |
| 10 | KGT10-00 | 18.5 | 26.5 | 6.8 | 21 | 40 | 28.4 | 25 |
| 12 | KGT12-00 | 20.9 | 28.5 | 7.5 | 22 | 57.4 | 45.4 | 29 |
| 16 | KGT16-00 | 26.5 | 34 | 10 | 25 | 100 | (84) | 40 |
Note 1) øD is the maximum diameter.
Note 2) Dimension inside "( )" is for soft nylon
One-Touch Fitting Stainless Steel KG Series Common Specifications (Reference)
Structure
KG Series structure
Applicable Tubing
| Tube materials | FEP, PFA, nylon, soft nylonNote 1), polyurethane |
|---|---|
| Tube outer diameter | ø4, ø6, ø8, ø10, ø12, ø16 |
Note 1) For soft nylon tube, water cannot be used.
Specifications
| Usable fluids | Air, waterNote 2) | |
|---|---|---|
| Operating pressure rangeNote 3) | -100 kPa to 1 MPa | |
| Proof pressure | 3 MPa | |
| Ambient and fluid temperature | -5 to 60°C, if water is used then 0 to 40°C (no freezing) | |
| Thread | Mounting Section | JIS B 0203 (taper thread for piping) JIS B 0205 (Metric Coarse Thread) |
| Nut part | JIS B 0205 (Metric Fine Thread) | |
| Thread sealant | With sealantNote 4)Or, without sealants | |
Note 2) The surge pressure must be under the maximum operating pressure.
Note 3) Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Note 4) Add the suffix "S" to the part number if w/ seal is desired.
Principle Part Materials
| Body | SUS303, PBT |
|---|---|
| Stud | SUS303 (thread portion) |
| Chuck | SUS304 |
| Guide | SUS304, SUS303, PBT |
| Collet, release button | POM |
| Seal, O-ring | NBR |
| Gasket | SUS304/NBR |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Packing, Material of O-Ring | Applicable Tube O.D.1 (φ) | Release button color | Custom-made specifications |
|---|---|---|---|---|---|---|---|---|
SGD 30.33 | 1 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 4 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 4 | Light Blue | Non-grease specification, rubber material・release push color change | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 4 | Light Blue | Non-grease specification, rubber material / release bush color change, steel-based non-specification (with electroless nickel plating) Clean specification (air blow, double packaging) | ||
SGD 33.13 | 1 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 6 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 35.12 | 2 Piece(s) | Available | 46 Day(s) | - | 6 | White | Changing Rubber material | |
SGD 35.93 | 2 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 6 | Light Blue | Non-grease specification, rubber material / release bush color change, steel-based non-specification (with electroless nickel plating) Clean specification (air blow, double packaging) | |
- | 2 Piece(s) | Quote | [Fluororubber] Special FKM (Fluorine Coating) | 6 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 44.33 | 1 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 8 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 8 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 46.32 | 2 Piece(s) | Available | 46 Day(s) | - | 8 | White | Changing Rubber material | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 8 | Light Blue | Non-grease specification, rubber material / release bush color change, steel-based non-specification (with electroless nickel plating) Clean specification (air blow, double packaging) | ||
- | 2 Piece(s) | Quote | [Fluororubber] Special FKM (Fluorine Coating) | 8 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 48.42 | 1 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 10 | White | N/A | |
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR | 10 | White | Lubricant：white petroleum jelly, release push color changeリリースブッシュ色変更 | ||
- | 2 Piece(s) | Quote | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 10 | Light Blue | Non-grease specification, rubber material・release push color change | ||
- | 2 Piece(s) | Quote | - | 10 | White | Changing Rubber material | ||
SGD 51.33 | 2 Piece(s) | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR (fluorine coated) | 10 | Light Blue | Non-grease specification, rubber material / release bush color change, steel-based non-specification (with electroless nickel plating) Clean specification (air blow, double packaging) | ||
- | 2 Piece(s) | Quote | [Fluororubber] Special FKM (Fluorine Coating) | 10 | Light Blue | Non-grease specification, rubber material・release push color change | ||
SGD 53.67 | 1 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 12 | White | N/A | |
SGD 52.73 | 1 Piece(s) | Available | 46 Day(s) | [Standard (NBR Nitrile Rubber )] NBR | 16 | White | N/A |
Loading...
Basic Information
| Types | Single-Action | Fitting Type | Union with same diameter | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Body Material | SUS303+PBT | Application | Clean circumstance / Foods・Drug-Related | Operating Temperature(°C) | -5::60 |
| Number of Connection Tubes(piece) | 3 | Color | White | Specifications | ISO Class：6 |
Specification/Dimensions
-
Packing, Material of O-Ring
- Standard (NBR Nitrile Rubber )
- Fluororubber
- Standard (NBR Nitrile Rubber )
-
Applicable Tube O.D.1(φ)
-
Release button color
- Light Blue
- White
-
Custom-made specifications
- Changing Rubber material
- Lubricant：white petroleum jelly, release push color changeリリースブッシュ色変更
- N/A
- Non-grease specification, rubber material / release bush color change, steel-based non-specification (with electroless nickel plating) Clean specification (air blow, double packaging)
- Non-grease specification, rubber material・release push color change
-
type
- KGT
Days to Ship
-
- All
- 46 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?