(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
Quote / Order
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Oldham Couplings Clamping Type
MiSUMi Economy
This is an economy item, The price is cheaper than the MISUMI standard product.
Part Number
Configured Part Number is shown.
- Download
Product Details - CAD Data unavailable
Product Overview
・Characteristic
A coupling is a part which purpose is to connect two different rotating bodies (motor shaft, ball screw, etc.) and transmit torque.
Protects equipment by absorbing axial deviations (eccentricity, declination, and axial amplitude) that occur between rotating bodies.
In the event of an overload, the coupling is first damaged and the connection is released to protect the power unit and the entire device.
Protects equipment by absorbing axial deviations (eccentricity, declination, and axial amplitude) that occur between rotating bodies.
In the event of an overload, the coupling is first damaged and the connection is released to protect the power unit and the entire device.
Dimensional Drawing
Material table
| Part | Material |  Surface Treatment |  Accessory |
| Hub | Aluminum Alloy | Clear Anodize | Hex Socket Clamp Screw |
| Spacer | PA66 | - |
Specification Table
Please follow the selection steps
～ 
to select the part no. Please specify the shaft hole diameter within the range of d1≤d2.
If the slip torque is less than the allowable torque, use it below the slip torque.
～ 
to select the part no. Please specify the shaft hole diameter within the range of d1≤d2.Part No.(Type· DL) | - |  d1 | - | d2 |
| E-LMPOC20L33 | - | 5 | - | 8 |
| E-LMPOC40L50 | - | 10 | - | 18 |
| Part No. | d1、d2Shaft Hole Dia.(d1≤d2) | |||||||||||||||||||||||||||||||
| Type | D | L | ||||||||||||||||||||||||||||||
| E-LMPOC | 16 | L29 | 4 | 5 | 6 | 6.35 | ||||||||||||||||||||||||||
| 20 | L33 | 5 | 6 | 6.35 | 7 | 8 | ||||||||||||||||||||||||||
| 25 | L39 | 5 | 6 | 6.35 | 8 | 9 | 9.525 | 10 | 11 | 12 | ||||||||||||||||||||||
| 32 | L45 | 5 | 6 | 8 | 9 | 9.525 | 10 | 11 | 12 | 12.7 | 14 | 15 | 16 | |||||||||||||||||||
| 40 | L50 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | |||||||||||||||||||
| 44 | L46 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | |||||||||||||||||
| 50 | L53 | 10 | 11 | 12.7 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | |||||||||||||||||||
| 50 | L58 | 10 | 11 | 12.7 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | |||||||||||||||||||
| 55 | L57 | 10 | 11 | 12.7 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | |||||||||||||||||
| 63 | L71 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | ||||||||||||||||||
| 70 | L77 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 32 | 35 | 38 | ||||||||||||||||
If the slip torque is less than the allowable torque, use it below the slip torque.| Part No. | F | Clamp Screw | Rated Torque (N·m) | Mass (g) | |||
| Type | D | L | M | Tightening torque N.m | |||
| E-LMPOC | 16 | L29 | 3 | M2.5 | 1 | 0.7 | 12 |
| 20 | L33 | 3.8 | M2.5 | 1 | 1.2 | 19 | |
| 25 | L39 | 3.9 | M3 | 1.5 | 2 | 35 | |
| 32 | L45 | 4.5 | M4 | 3.5 | 4.5 | 67 | |
| 40 | L50 | 5.5 | M5 | 8 | 9 | 114 | |
| 44 | L46 | 7.8 | M5 | 8 | 12 | 140 | |
| 50 | L53 | 7.5 | M6 | 13 | 19 | 190 | |
| 50L | L58 | 6.3 | M6 | 13 | 19 | 215 | |
| 55 | L57 | 6.3 | M6 | 13 | 25 | 260 | |
| 63 | L71 | 7.8 | M8 | 28 | 33 | 455 | |
| 70 | L77 | 7.7 | M8 | 28 | 56 | 520 | |
Alterations
| Shaft Hole Dia. d1 · d2 | b(Keyway Width) | t Keyway Depth | Keyway Nominal Dim. b X h | |
| LK | RK | |||
| 8～10 | 3 | 3 | 1.4 | 3x3 |
| 11～12 | 4 | 4 | 1.8 | 4x4 |
| 13～17 | 5 | 5 | 2.3 | 5x5 |
| 18～22 | 6 | 6 | 2.8 | 6x6 |
| 23～30 | 8 | 8 | 3.3 | 8x7 |
| 31～38 | 10 | 10 | 3.3 | 10x8 |
Product Features
By connecting a cross spacer in the middle of the coupling, it can be freely disassembled and installed.
The spacer uses PA66 and has excellent wear resistance, corrosion resistance, and electrical insulation.
The sliding design compensates for radial and angular deviations more effectively.
The spacer uses PA66 and has excellent wear resistance, corrosion resistance, and electrical insulation.
The sliding design compensates for radial and angular deviations more effectively.
Example of Use
Precautions
Operating Temperature: －20℃～80℃. d1、d2
Eccentricity, declination angle and axial amplitude are all allowable values of a single term. If multiple deviations occur at the same time, the allowable value of each deviation is reduced to 1/2 of the original value.
Eccentricity, declination angle and axial amplitude are all allowable values of a single term. If multiple deviations occur at the same time, the allowable value of each deviation is reduced to 1/2 of the original value.
| Part Number |
|---|
| E-LMPOC16L29-[4,5,6,6.35]-[4,5,6,6.35] |
| E-LMPOC20L33-[5,6,6.35,7,8]-[5,6,6.35,7,8] |
| E-LMPOC25L39-[5,6,6.35,8,9,9.525,10,11,12]-[5,6,6.35,8,9,9.525,10,11,12] |
| E-LMPOC32L45-[5,6,6.35,8,9,9.525,10,11,12,12.7,14,15,16]-[5,6,6.35,8,9,9.525,10,11,12,12.7,14,15,16] |
| E-LMPOC40L50-[8,9,9.525,10,11,12,14,15,16,17,18,19]-[8,9,9.525,10,11,12,14,15,16,17,18,19] |
| E-LMPOC44L46-[8,9,9.525,10,11,12,14,15,16,17,18,19,20,22]-[8,9,9.525,10,11,12,14,15,16,17,18,19,20,22] |
| E-LMPOC50L53-[10,11,12.7,14,15,16,17,18,19,20,22,24]-[10,11,12.7,14,15,16,17,18,19,20,22,24] |
| E-LMPOC50L58-[10,11,12.7,14,15,16,17,18,19,20,22,24]-[10,11,12.7,14,15,16,17,18,19,20,22,24] |
| E-LMPOC55L57-[10,11,12.7,14,15,16,17,18,19,20,22,24,25,28]-[10,11,12.7,14,15,16,17,18,19,20,22,24,25,28] |
| E-LMPOC63L71-[14,15,16,17,18,19,20,22,24,25,28,30,32]-[14,15,16,17,18,19,20,22,24,25,28,30,32] |
| E-LMPOC70L77-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | 轴孔经(加工完毕)d1 (Ø) | 轴孔经(加工完毕)d2 (Ø) | 外径D (Ø) | 全长L (mm) | Allowable Torque (N•m) | Allowable Lateral Misalignment (mm) | Max. Rotational Speed (r/min) | Moment of Inertia (kg･m2) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) | 4 ～ 6.35 | 4 ～ 6.35 | 16 | 29 | 0.7 | 0.8 | 9000 | 3.5×10-7 | ||
- | 1 Piece(s) | 5 Day(s) | 5 ～ 8 | 5 ～ 8 | 20 | 33 | 1.2 | 1.2 | 7000 | 1.5×10-6 | ||
- | 1 Piece(s) | 5 Day(s) | 5 ～ 12 | 5 ～ 12 | 25 | 39 | 2 | 1.6 | 6000 | 3.2×10-6 | ||
- | 1 Piece(s) | 5 Day(s) | 5 ～ 16 | 5 ～ 16 | 32 | 45 | 4.5 | 2 | 4800 | 1.5×10-5 | ||
- | 1 Piece(s) | 6 Day(s) | 8 ～ 19 | 8 ～ 19 | 40 | 50 | 9 | 2.4 | 3600 | 4.2×10-5 | ||
- | 1 Piece(s) | 6 Day(s) | 8 ～ 22 | 8 ～ 22 | 44 | 46 | 12 | 2.5 | 3500 | 4.5×10-5 | ||
- | 1 Piece(s) | Quote | 10 ～ 24 | 10 ～ 24 | 50 | 53 | 19 | 2.6 | 3000 | 1.0×10-4 | ||
- | 1 Piece(s) | 6 Day(s) | 10 ～ 24 | 10 ～ 24 | 50 | 58 | 19 | 3 | 3000 | 1.1×10-4 | ||
- | 1 Piece(s) | 6 Day(s) | 10 ～ 28 | 10 ～ 28 | 55 | 57 | 25 | 3.2 | 3000 | 1.3×10-5 | ||
- | 1 Piece(s) | 6 Day(s) | 14 ～ 32 | 14 ～ 32 | 63 | 71 | 33 | 3 | 2550 | 3.5×10-4 | ||
- | 1 Piece(s) | 6 Day(s) | 14 ～ 38 | 14 ～ 38 | 70 | 77 | 56 | 3.5 | 2500 | 4.1×10-4 |
Loading...
Basic Information
| Series Name | Oldham | Application | Standard / For Servo Motors / Stepping Motor | Features | High Torsional Rigidity / High Torque Type |
|---|---|---|---|---|---|
| Body Material | Aluminum Alloy | Allowable Angular Misalignment(deg) | 3 | Product Category | Coupling Main Body |
| Buffer Material | Nylon | Allowable Axial Misalignment(mm) | ±0.2 | Shaft Tightening Method | Fixing Bolt |
| Shaft Hole Shape | Standard | Spacer Material | PA66 |
Specification/Dimensions
-
轴孔经(加工完毕)d1(Ø)
-
轴孔经(加工完毕)d2(Ø)
-
外径D(Ø)
-
全长L(mm)
-
Allowable Torque(N•m)
-
Allowable Lateral Misalignment(mm)
-
Max. Rotational Speed(r/min)
-
type
- E-LMPOC
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is a coupling?
- Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
- Question: Is there any reference available for lateral misalignment and angular misalignment of the product?
- Answer: Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.
- Question: What are the product features?
- Answer: The middle of the coupling is connected with a cross slider, which can be disassembled freely. Large radial and angular deviations are allowed.
- Question: Is there a keyway machining for the inner hole of the product?
- Answer: Additional keyways can be machined on the product body. Please refer to MISUMI manual and website.
- Question: Do I need to assemble the product myself when it arrives?
- Answer: The products are shipped from different places and may arrive in bulk, so please just put them together yourself.
Tech Support
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?