(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our operating hours are from 9:00~15:00 during the upcoming Vesak Day Holiday 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole (Part Numbers)

MISUMI

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SAFU	SFFU	-	SFHAM	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >>P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSAFU	SSFFU	-	SSHAM	-	SUS440C or 13Cr stainless		-
PSAFU	PSFFU	-	PSHAM	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFU	PSSFFU	-	PSSHAM	-	SUS440C or 13Cr stainless
RSAFU	-	-	RSHAM	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSAGU	-	PSHGM	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSAGU	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	M	-	T	-	N	-	SC	-	H
SAFU15 SFHAM15	- -	300 300	- -	F18 F18	- -	M6 M6	- -	T17 T17	- -	N12 N12	-	SC8	-	H8

Part Number			1mm Increments		Selection								Wrench Flats Dimensions			D Tol.			(Y)Max.	C
Type		D	L	F, T	M, N (Coarse)								SC	W	ℓ₁	g6	h5	f8	(Y)Max.	C
		8	25~ 990	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6								SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
(With Wrench Flats) (D Tol. g6) SAFU SSAFU PSAFU PSSAFU (D Tol. f8) PSAGU PSSAGU	(D Tol. h5) SFFU SSFFU PSFFU PSSFFU	10	25~ 990		6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
		12	25~1190		6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		13	25~1190		6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		15	25~1190		6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		16	25~1190		6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		18	25~1190		6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		20	25~1190		6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		25	25~1190			8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		30	25~1490			8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	1.0 or Less
		35	25~1490				10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		40	25~1490					12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		50	25~1490						16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less

Part Number		1mm Increments		Selection							Wrench Flats Dimensions			D Tol.	(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							SC	W	ℓ₁	g6	(Y)Max.	C
	8	25~500	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6							SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	800	0.5 or Less
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSAFU (Ymax≤800)	10	25~500		6	8							8	8	-0.005 -0.014	800	0.5 or Less
	12	25~500		6	8	10						10	10	-0.006 -0.017	1000	0.5 or Less
	13	25~500		6	8	10	12					11	10	-0.006 -0.017	1000	0.5 or Less
	15	25~500		6	8	10	12					13	10	-0.006 -0.017	1000	0.5 or Less
	16	25~500		6	8	10	12					14	10	-0.006 -0.017	1200	0.5 or Less
	18	25~500		6	8	10	12	16				16	10	-0.006 -0.017	1200	0.5 or Less
	20	25~500		6	8	10	12	16				17	10	-0.007 -0.020	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		22	10	-0.007 -0.020	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		27	15	-0.007 -0.020	1500	1.0 or Less

Part Number		1mm Increments		Selection							Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							H	d	g6	f8	(Y)Max.	C
(With Cross-Drilled Hole) (D Tol. g6) SFHAM SSHAM PSHAM PSSHAM RSHAM (D Tol. f8) PSHGM [ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	10	25~500	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6	8						H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.5 or Less
	12	25~500		6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	13	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	15	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	16	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	18	25~500		6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	20	25~500		6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	1.0 or Less

Coarse Thread Undercut Dimensions
M N	Pitch	MC NC	(g)
6	1.0	4.4	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6	5
30	3.5	25.0	5

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
PSHAM16-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMS[10,12,14]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-NMS[10,12,14]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-MMS[10,12,14]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-MMS[10,12,14]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHAM16-[25-500/1]-F[5-500/1]-MMS[10,12,14]-T[5-500/1]-NMS[10,12,14]-H[0-496/1]
PSHAM18-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-NMS[10,14,500]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,500]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,500]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,500]-T[5-500/1]-NMS[10,14,500]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]
PSHAM18-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-NMS[10,14,500]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-NMC[6,8,10,12,15,17]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-NMS[10,12,14,18]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-MMC[6,8,10,12,15,17]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-MMC[6,8,10,12,15,17]-T[5-500/1]-NMC[6,8,10,12,15,17]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-MMC[6,8,10,12,15,17]-T[5-500/1]-NMS[10,12,14,18]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-MMS[10,12,14,18]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-MMS[10,12,14,18]-T[5-500/1]-NMC[6,8,10,12,15,17]-H[0-495/1]
PSHAM20-[25-500/1]-F[5-500/1]-MMS[10,12,14,18]-T[5-500/1]-NMS[10,12,14,18]-H[0-495/1]
PSHAM25-[25-500/1]-F[7-500/1]-M[8,10,12,16,20,24]-T[5-500/1]-N[8,10,12,16,20,24]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-M[8,10,12,16,20,24]-T[5-500/1]-NMC[8,10,12,15,17,20]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-M[8,10,12,16,20,24]-T[5-500/1]-NMS[10,12,14,18]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-MMC[8,10,12,15,17,20]-T[5-500/1]-N[8,10,12,16,20,24]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-MMC[8,10,12,15,17,20]-T[5-500/1]-NMC[8,10,12,15,17,20]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-MMC[8,10,12,15,17,20]-T[5-500/1]-NMS[10,12,14,18]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-MMS[10,12,14,18]-T[5-500/1]-N[8,10,12,16,20,24]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-MMS[10,12,14,18]-T[5-500/1]-NMC[8,10,12,15,17,20]-H[0-494/1]
PSHAM25-[25-500/1]-F[7-500/1]-MMS[10,12,14,18]-T[5-500/1]-NMS[10,12,14,18]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-M[8,10,12,16,20,24]-T[5-500/1]-N[8,10,12,16,20,24]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-M[8,10,12,16,20,24]-T[5-500/1]-NMC[8,10,12,15,17,20,25,500]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-M[8,10,12,16,20,24]-T[5-500/1]-NMS[10,12,14,18]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-MMC[8,10,12,15,17,20,25,500]-T[5-500/1]-N[8,10,12,16,20,24]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-MMC[8,10,12,15,17,20,25,500]-T[5-500/1]-NMC[8,10,12,15,17,20,25,500]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-MMC[8,10,12,15,17,20,25,500]-T[5-500/1]-NMS[10,12,14,18]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-MMS[10,12,14,18]-T[5-500/1]-N[8,10,12,16,20,24]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-MMS[10,12,14,18]-T[5-500/1]-NMC[8,10,12,15,17,20,25,500]-H[0-494/1]
PSHAM30-[25-500/1]-F[7-500/1]-MMS[10,12,14,18]-T[5-500/1]-NMS[10,12,14,18]-H[0-494/1]
PSHGM8-[25-500/1]-F[5-18/1]-M6-T[5-18/1]-N6-H[0-496/1]
PSHGM8-[25-500/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-H[0-496/1]
PSHGM8-[25-500/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-H[0-496/1]
PSHGM8-[25-500/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-H[0-496/1]
PSHGM10-[25-500/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]-H[0-496/1]
PSHGM10-[25-500/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]-H[0-496/1]
PSHGM10-[25-500/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]-H[0-496/1]
PSHGM10-[25-500/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-M[6,8,10]-T[5-500/1]-N[6,8,10]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-M[6,8,10]-T[5-500/1]-NMC[6,8,10]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-M[6,8,10]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-MMC[6,8,10]-T[5-500/1]-N[6,8,10]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-MMC[6,8,10]-T[5-500/1]-NMC[6,8,10]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-MMC[6,8,10]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-N[6,8,10]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMC[6,8,10]-H[0-496/1]
PSHGM12-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMC[6,8,10]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-MMC[6,8,10]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-MMC[6,8,10]-T[5-500/1]-NMC[6,8,10]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-MMC[6,8,10]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMC[6,8,10]-H[0-496/1]
PSHGM13-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHGM15-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-M[6,8,10,12]-T[5-500/1]-NMS[10,12,14]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-MMC[6,8,10,12]-T[5-500/1]-NMS[10,12,14]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-MMS[10,12,14]-T[5-500/1]-N[6,8,10,12]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-MMS[10,12,14]-T[5-500/1]-NMC[6,8,10,12]-H[0-496/1]
PSHGM16-[25-500/1]-F[5-500/1]-MMS[10,12,14]-T[5-500/1]-NMS[10,12,14]-H[0-496/1]
PSHGM18-[25-500/1]-F[5-500/1]-M[6,10,12,16,500]-T[5-500/1]-N[6,10,12,16,500]-H[0-495/1]
PSHGM18-[25-500/1]-F[5-500/1]-M[6,10,12,16,500]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	H (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	10 ～ 14	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 12	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 12	-	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 12	-	-	10 ～ 14	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 14	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 14	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 14	-	10 ～ 14	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 16	6 ～ 16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	6 ～ 500	-	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	10 ～ 500	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 16	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 500	-	-	-	5 ～ 500	0 ～ 495	5 ～ 500	-	6 ～ 16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 500	-	6 ～ 500	-	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 500	-	-	10 ～ 500	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 500	-	-	5 ～ 500	0 ～ 495	5 ～ 500	-	6 ～ 16
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 500	6 ～ 500	-	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 500	-	10 ～ 500	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 16	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	6 ～ 17	-	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	10 ～ 18	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 17	-	-	-	5 ～ 500	0 ～ 495	5 ～ 500	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 17	-	6 ～ 17	-	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	6 ～ 17	-	-	10 ～ 18	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	-	-	5 ～ 500	0 ～ 495	5 ～ 500	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	6 ～ 17	-	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	-	10 ～ 18	5 ～ 500	0 ～ 495	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	7 ～ 500	0 ～ 494	5 ～ 500	8 ～ 24	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	8 ～ 20	-	7 ～ 500	0 ～ 494	5 ～ 500	8 ～ 24	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	10 ～ 18	7 ～ 500	0 ～ 494	5 ～ 500	8 ～ 24	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 20	-	-	-	7 ～ 500	0 ～ 494	5 ～ 500	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 20	-	8 ～ 20	-	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 20	-	-	10 ～ 18	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	-	-	7 ～ 500	0 ～ 494	5 ～ 500	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	8 ～ 20	-	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	-	10 ～ 18	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	7 ～ 500	0 ～ 494	5 ～ 500	8 ～ 24	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	8 ～ 500	-	7 ～ 500	0 ～ 494	5 ～ 500	8 ～ 24	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	10 ～ 18	7 ～ 500	0 ～ 494	5 ～ 500	8 ～ 24	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 500	-	-	-	7 ～ 500	0 ～ 494	5 ～ 500	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 500	-	8 ～ 500	-	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 500	-	-	10 ～ 18	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	-	-	7 ～ 500	0 ～ 494	5 ～ 500	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	8 ～ 500	-	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	10 ～ 18	-	10 ～ 18	7 ～ 500	0 ～ 494	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 18	0 ～ 496	5 ～ 18	6	6
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 500	f8	No Induction Hardening	-	-	-	6	-	5 ～ 18	0 ～ 496	5 ～ 18	6	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 500	f8	No Induction Hardening	-	6	-	-	-	5 ～ 18	0 ～ 496	5 ～ 18	-	6
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 500	f8	No Induction Hardening	-	6	-	6	-	5 ～ 18	0 ～ 496	5 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 24	0 ～ 496	5 ～ 24	6 ～ 8	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 500	f8	No Induction Hardening	-	-	-	6 ～ 8	-	5 ～ 24	0 ～ 496	5 ～ 24	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 500	f8	No Induction Hardening	-	6 ～ 8	-	-	-	5 ～ 24	0 ～ 496	5 ～ 24	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 500	f8	No Induction Hardening	-	6 ～ 8	-	6 ～ 8	-	5 ～ 24	0 ～ 496	5 ～ 24	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 10	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	-	-	6 ～ 10	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	-	-	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	6 ～ 10	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	6 ～ 10	-	6 ～ 10	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	6 ～ 10	-	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	6 ～ 10	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	6 ～ 10	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	6 ～ 10	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	6 ～ 10	-	6 ～ 10	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	6 ～ 10	-	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	6 ～ 10	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	6 ～ 12	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	6 ～ 12	-	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	6 ～ 12	-	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 500	-	10 ～ 500	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	-	-	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	-	-	-	10 ～ 14	5 ～ 500	0 ～ 496	5 ～ 500	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	6 ～ 12	-	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	6 ～ 12	-	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	6 ～ 12	-	-	10 ～ 14	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 14	-	-	5 ～ 500	0 ～ 496	5 ～ 500	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 14	6 ～ 12	-	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 500	f8	No Induction Hardening	-	-	10 ～ 14	-	10 ～ 14	5 ～ 500	0 ～ 496	5 ～ 500	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 500	f8	No Induction Hardening	-	-	-	-	-	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 500	6 ～ 500
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 500	f8	No Induction Hardening	-	-	-	6 ～ 500	-	5 ～ 500	0 ～ 495	5 ～ 500	6 ～ 500	-

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Threaded
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

1,639 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1475/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18

500
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18

500
Clear
F(mm)
[5-500/1mm Unit(s)]
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
T(mm)
[5-500/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30

500
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30

500
Clear
type
- PSAFU
- PSAGU
- PSFFU
- PSHAM
- PSHGM
- PSSAFU
- PSSAGU
- PSSFFU
- PSSHAM
- RSAFU
- RSHAM
- SAFU
- SFFU
- SFHAM
- SSAFU
- SSFFU
- SSHAM
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

6 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole (Part Numbers)

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

H(mm)

T(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)