(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Search by Application

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Manifold Blocks - Pneumatic - Lateral Through Hole, Upper Hole

MISUMI

This is a block manifold for air. G(PF) thread processing can also be specified.

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMSF1-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF1-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF1-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF1-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF1-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF1-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF1-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF1-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF2-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF2-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF2-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF2-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF2-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF2-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF2-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF2-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF3-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF3-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF3-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF3-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF3-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF3-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF3-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF3-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF4-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF4-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF4-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF4-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF4-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF4-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF4-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF4-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF5-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF5-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF5-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF5-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF5-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF5-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF5-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF5-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF6-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF6-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF6-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF6-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF6-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF6-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF6-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF6-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF7-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF7-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF7-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF7-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]
BMSF7-Q[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMSF7-Q[1,2,5]-[G1N,G2N]-K[1,2,5]
BMSF7-Q[1,2,5]-G[1,2,5]-[K1N,K2N]
BMSF7-Q[1,2,5]-G[1,2,5]-K[1,2,5]
BMSF8-[Q1N,Q2N]-[G1N,G2N]-[K1N,K2N]
BMSF8-[Q1N,Q2N]-[G1N,G2N]-K[1,2,5]
BMSF8-[Q1N,Q2N]-G[1,2,5]-[K1N,K2N]
BMSF8-[Q1N,Q2N]-G[1,2,5]-K[1,2,5]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Surface Treatment	Block Size (mm)	Number of Circuits	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Drawing G Part Thread Dia. NPT Selection [G]	Drawing K Part Thread Dia. NPT Selection [K]	Drawing Q Part Thread Dia. NPT Selection [Q]	Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)	Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)	Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	1	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	2	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	3	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	4	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	5	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	6	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	7	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	8	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	8	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	8	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	5 Day(s)	10	Not Provided	30 x 30	8	Standard Thread {PT, M (Coarse) Thread}	-	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	1 ～ 5	1 ～ 5	-

1
2
3
4
5
Next >>

Basic Information

Shape	Lateral Through Hole, Upper Hole	Material	Aluminum Alloy	Application	Pneumatic

Configure

2,032 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Surface Treatment
- Not Provided
- Clear Anodize
Clear
Block Size(mm)
- 20 x 20
- 30 x 30
- 40 x 40
- 60 x 60
Clear
Number of Circuits
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, M (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Front Surface Counterbore)
- Not Specified (Through)
- T (Tapped)
- ZB (Back Surface Counterbore)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
15

30

40

60
[15-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Drawing G Part Thread Dia. NPT Selection [G]
- 1/4 [G2N]
- 1/8 [G1N]
Clear
Drawing K Part Thread Dia. NPT Selection [K]
- 1/4 [K2N]
- 1/8 [K1N]
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
Clear
Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
3

4
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)
1

2

3

4

5

8
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)
1

2

3

4

5

8
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
1

2

3

4

5

6

8
Clear
type
- BMSF
- BMSFA
- BMSFAP
- BMSFB
- BMSFC
- BMSFCA
- BMSFCAP
- BMSFCP
- BMSFL
- BMSFLA
- BMSFLAP
- BMSFLP
- BMSFP
- G-BMSF
- G-BMSFA
- G-BMSFAP
- G-BMSFB
- G-BMSFC
- G-BMSFCA
- G-BMSFCAP
- G-BMSFCP
- G-BMSFL
- G-BMSFLA
- G-BMSFLAP
- G-BMSFLP
- G-BMSFP
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

5 Day(s) or Less

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(65) 6733 7211 / FAX：(65) 6733 0211; 9:00am - 6:00pm (Monday - Friday); Technical Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Manifold Blocks - Pneumatic - Lateral Through Hole, Upper Hole

Part Number

Basic Information

Configure

Specification/Dimensions

Surface Treatment

Block Size(mm)

Number of Circuits

Thread Size / Type

Mounting Hole Change

Pitch P(mm)

Pitch Standard / Configurable

Drawing G Part Thread Dia. NPT Selection [G]

Drawing K Part Thread Dia. NPT Selection [K]

Drawing Q Part Thread Dia. NPT Selection [Q]

Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)

Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)

Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)

Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

type

CAD

Days to Ship

Specify Alterations

Tech Support

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)