(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our operating hours are from 9:00~15:00 during the upcoming Vesak Day Holiday 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Insert（Type：Tool）
In general, coil inserts that have been machined into a coil shape are very common, but we also have a wide lineup that includes "self-tapping inserts", "inserts for resin", "insert nuts", "locking inserts", etc., enabling use to suit various environments or materials.
MISUMI enables spec searches and ordering quantities from just 1 piece. Tools are also sold in addition to the inserts themselves.
[Materials]
Iron, stainless steel, brass, phosphor bronze, Inconel, nitronics
[Size]
M1.4 to M39 are available as well as imperial sizes
[Search Keywords]
Heli-Sert, E-Sert, Sprue, Female Thread
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Tool for Ensat, for Manual Processing, 610 Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: SGD 115.97- Days to Ship: Same day or more -
MISUMI
Extraction tool for threaded inserts
- Volume Discount
Standard Price: SGD 40.44- Days to Ship: Same day -
MISUMI
[Specification expansion] In response to many requests, a new standard product is now available! *For applicable products, please see the specification list or catalog PDF
- Volume Discount
Standard Price: SGD 33.69- Days to Ship: Same day or more -
Self-Tapping Inserts - Hand Tools for Self-Tapping Inserts
MISUMI
Compatible threaded inserts are M3, 4, 5, 6, 8, 10 and 12.
- Volume Discount
Standard Price: SGD 134.43- Days to Ship: Same day or more -
Tangless Inserts Installation/Removal Tools
MISUMI
Due to changes in manufacturer standards, the color of the cap may vary. Thank you for your understanding. There is no change in performance.
- Volume Discount
Standard Price: SGD 219.00 Days to Ship: Same day or more -
TSUGAMI
This is a tap that was especially designed for E-sert (helisert) bottom holes.
Standard Price: SGD 40.86- Days to Ship: 4 Day(s) or more -
Trade Series Recoil Kit (Milli)
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
Standard Price: SGD 51.01- Days to Ship: Same day or more -
Thread Insert Installation Tool
MISUMI
[Specification expansion] In response to many requests, a new standard product has been released!
- Volume Discount
Standard Price: SGD 121.30- Days to Ship: Same day or more -
Standard Price: SGD 199.95- Days to Ship: 4 Day(s) or more -
Dedicated Electric Tool For Tangless Insert
ACCURATE
Uses a brushless motor for a light weight and long life.
Standard Price: SGD 1,006.38- Days to Ship: 4 Day(s) or more -
TSUGAMI
A steel tool used to break off the tongue from the notch after inserting the insert.
Standard Price: SGD 20.35- Days to Ship: 4 Day(s) or more -
Tangless Inserts Tool Replacement Device
ACCURATE
A replacement hook for tangless insert metric coarse extraction tools. Replace the hook when it becomes damaged or worn.
[Features]
· A replacement blade for tools.
· The tool is included at the time of initial purchase, and is a part used for maintenance when the blades become worn or are mistakenly not included.Standard Price: SGD 134.47- Days to Ship: 6 Day(s) or more -
Tangless insert metric insertion tool (for locking)
ACCURATE
A dedicated locking-type insertion tool.
Standard Price: SGD 232.93 Days to Ship: 8 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M6-0.75, M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M201.5, M221.5, M24-2.0, M27-2.0, M30-2.0, M33-2.0, M36-3.0, M39-3.0
Standard Price: SGD 35.20- Days to Ship: 7 Day(s) or more -
ACCURATE
· Automatic type using spring force.
· * Also supports wire insertion with conventional tangs.Standard Price: SGD 151.18- Days to Ship: 8 Day(s) or more -
Thread Insert Tang Breaking Tool
MISUMI
Compatible threaded inserts range from M2 to M18.
- Volume Discount
Standard Price: SGD 31.84- Days to Ship: Same day or more -
Tangless Insert, Tool Replacement Claw (for Insertion Tools)
ACCURATE
A replacement hook for tangless insert metric coarse insertion tools. Replace the hook when it becomes damaged or worn.
Standard Price: SGD 134.47- Days to Ship: 4 Day(s) or more -
TSUGAMI
A general insertion tool that even beginners can use to perform easy insertion. Available in sizes of M 2.5 mm or larger for both coarse and fine threads. Sizes under 8 mm are available for standard threaded inserts and locks.
Standard Price: SGD 70.16- Days to Ship: 4 Day(s) or more -
Tool for Ensat, for Machine Processing, 620 Type
KKV
A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: SGD 290.84- Days to Ship: 4 Day(s) or more -
Tangless Insert Manual Prewinder Tool for Metric Size (Insertion Only)
ACCURATE
Pre-winder type Tangless insert dedicated tool for Tangless insert insertion work.
[Features]
·It can be used for both free type and locking type insertion work.
·It can be used for insertion even under severe insertion conditions that are difficult for normal insertion tools (mandrel type).
[Applications]
·It is used for applying surface treatments such as alodine treatment or anodizing to the base material after tapping the pilot hole.
·It is ideal for the case where the pilot hole processing diameter is expected to be smaller than the specified value due to soft resin.
·It can be used for insertion work where friction with the base metal may become excessive during insert insertion.Standard Price: SGD 461.81 Days to Ship: 6 Day(s) or more -
SUNCO
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
Standard Price: SGD 29.12- Days to Ship: 7 Day(s) or more -
TSUGAMI
A tap that includes a spiral blade groove (approx. 35°) for efficiently performing tapping and creating blind holes.
Standard Price: SGD 29.56- Days to Ship: 4 Day(s) or more -
TSUGAMI
Use when extracting the inserted threaded insert from the tapped hole. Applicable thread diameter: M6 to M22
Standard Price: SGD 36.47- Days to Ship: 4 Day(s) or more -
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.
[Features]
· A male screw repair kit for individual recoils that is widely used throughout the world in repair associated with industrial machinery, automobiles, and motorcycles.
· The following parts are included in the red plastic box.
· Drill for bottom hole (M12-1 / 2 or less), recoil tap #2 (HSS), recoil (length 1.5D), insertion tool (M12-1 / 2 or less, and includes tap handle), extraction tool with magnet (M12-1 / 2 or less).
· The spark plug kit includes a pilot tap.
· The pilot tap does not use a drillStandard Price: SGD 52.09- Days to Ship: 7 Day(s) or more -
RECOIL
[Features]
· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
· Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
· In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
· Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
· Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.Standard Price: SGD 27.01- Days to Ship: 7 Day(s) or more -
RECOIL
A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.
Standard Price: SGD 111.18- Days to Ship: 4 Day(s) or more -
Tangless insert metric pull-out tool (for locking)
ACCURATE
A dedicated locking-type extraction tool.
Standard Price: SGD 232.93 Days to Ship: 8 Day(s) or more -
Tangless insert unified insertion tool (for locking)
ACCURATE
A dedicated locking-type insertion tool.
Standard Price: SGD 461.43 Days to Ship: 8 Day(s) or more -
Tangless insert electric screwdriver
ACCURATE
A dedicated electric screwdriver for large diameter tangless inserts.
(For metric sizes M16 to M20)Standard Price: SGD 598.93 Days to Ship: 6 Day(s) or more -
SUNCO
It is a tool that folds the tang after inserting the sprue.
Press the tip against the tang and lightly hit the head with a hammer to easily break off at the notch.
In addition, the snapped-off tang attaches to the magnet for confirmation on the spot.
[Nominal M] 2, 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20
[Nominal W] #2-56, #4-40, #5-40, #6-32, #8-32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4Standard Price: SGD 37.01- Days to Ship: 4 Day(s) or more -
SUNCO
[Nominal M] 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, 36
[Nominal W] 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4, 7/8, 1-8Standard Price: SGD 52.97- Days to Ship: 7 Day(s) or more -
SUNCO
[Nominal M]2, 2.5, 3, 4, 5, 6, 8, 10, 12. [Thread Type]metric (coarse) thread
Standard Price: SGD 293.02- Days to Ship: 4 Day(s) or more -
SUNCO
[Outer Diameter - Pitch] M6-0.75, M8-1.0, M10-1.25, M12-1.25, M14-1.5, M16-1.5, M18-1.5, M20-1.5, M22-1.5, M24-2.0, M27-2.0, M30-2.0, M33-2.0, M36-3.0, M39-3.0
Standard Price: SGD 35.20- Days to Ship: 7 Day(s) or more -
SUNCO
It is used to extract the sprue from the base material female thread of the tap slot.
Standard Price: SGD 40.54- Days to Ship: 4 Day(s) or more -
Standard Price: SGD 103.99- Days to Ship: 7 Day(s) or more -
Manual Insertion Tool For CT-R
ACCURATE
· Use of a screw type mandrel eliminates pitch jump insertion.
· Necessary for manual work or when attaching to the electric tool "KFS-12".
· Specify CT-R so that it is not mistaken with a tangless insertion tool.
· Can also be used for wire insertion with conventional tangs.Standard Price: SGD 85.59- Days to Ship: 11 Day(s) or more -
RECOIL
A tool that breaks off the tongue with the repulsive force of the spring.
[Features]
・ The same force is always applied to the tongue and it can be folded off correctly
[Applications]
・ Production line, etc.Standard Price: SGD 236.41 Days to Ship: 10 Day(s) or more -
MISUMI
Compatible threaded insert M2 to 12, a set of 2 pcs., a plug tap and a bottoming tap.
- Volume Discount
Standard Price: SGD 99.39- Days to Ship: Same day or more -
RECOIL
[Features]
·A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.
·The following parts are contained in a red plastic box.
·Pilot hole drill (M12-1/2 or less), Recoil tap #2 (HSS), Recoil (1.5D length), Insertion tool (M12-1/2 or less, with tap handle), Breaking tool with magnet (M12-1/2 or less).
·The spark plug kit contains a pilot tap.
·Pilot taps can be used to create oversize taps without using a drill, and since the original thread serves as a guide, angle errors do not occur.Standard Price: SGD 144.88- Days to Ship: 4 Day(s) or more -
Insertion Tool for Ensat and Gripp, for Manual Processing, 619 Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 14 18 size / internal screw d1 (mm) 14 18
Standard Price: SGD 345.40- Days to Ship: 7 Day(s) or more -
Tool for Ensat, for Machine Processing, Extended Type, 621 Type
KKV
A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
Standard Price: SGD 555.19- Days to Ship: 7 Day(s) or more -
Insertion Tool for Ensat and Gripp, for Machine Processing, 629 Type
KKV
A tool for machine processing inserts. Size / internal screw d1 (mm) 14 18 size / internal screw d1 (mm) 14 18
Standard Price: SGD 1,064.50- Days to Ship: 16 Day(s) or more -
Tangless insert coarse mandrel insertion tool
ACCURATE
A dedicated insertion tool for large diameter tangless inserts,
Standard Price: SGD 2,015.78 Days to Ship: 6 Day(s) or more -
Tangless insert fine prewinder insertion tool
ACCURATE
A dedicated insertion tool for large diameter tangless inserts,
Standard Price: SGD 2,686.48 Days to Ship: 6 Day(s) or more -
Tangless insert electric prewinder tool
ACCURATE
The contact resistance during insertion is less than that found with manual tools. We recommend this for work efficiency.
Standard Price: SGD 817.82 Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Screw Dia. M (after insertion)(mm) |
| Type |
| Material |
| Screw Type |
| Length L (after insertion) (D = Thread Dia. M) |
| Application |
| Notch |
| Thread Dia. (After inserted), Unified(inch) |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KKV | MISUMI | MISUMI | MISUMI | MISUMI | TSUGAMI | RECOIL | MISUMI | ACCURATE | ACCURATE | TSUGAMI | ACCURATE | ACCURATE | SUNCO | ACCURATE | MISUMI | ACCURATE | TSUGAMI | KKV | ACCURATE | SUNCO | TSUGAMI | TSUGAMI | RECOIL | RECOIL | RECOIL | ACCURATE | ACCURATE | ACCURATE | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | SUNCO | ACCURATE | RECOIL | MISUMI | RECOIL | KKV | KKV | KKV | ACCURATE | ACCURATE | ACCURATE |
| Product Series | Tangless Insert, Tool Replacement Claw (for Insertion Tools) | Tangless Insert Manual Prewinder Tool for Metric Size (Insertion Only) | Insertion Tool for Ensat and Gripp, for Manual Processing, 619 Type | Tool for Ensat, for Machine Processing, Extended Type, 621 Type | Insertion Tool for Ensat and Gripp, for Machine Processing, 629 Type | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | Same day | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 8 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 7 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | Same day or more | 4 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 16 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
| Screw Dia. M (after insertion)(mm) | 2.5 ～ 16 | - | - | - | - | 3 ～ 12 | 2 ～ 20 | - | - | - | 3 ～ 20 | - | - | 6 ～ 36 | - | - | - | 3 ～ 10 | 2.5 ～ 30 | - | 2 ～ 20 | 3 ～ 8 | - | - | 3 ～ 10 | 6 ～ 10 | - | - | - | 2 ～ 16 | 6 ～ 30 | 2 ～ 12 | 6 ～ 16 | 2 ～ 5 | - | - | - | - | 10 ～ 14 | 14 ～ 18 | 2.5 ～ 30 | 14 ～ 18 | - | - | - |
| Type | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool | Tool |
| Material | Steel | - | - | - | - | Steel | Stainless Steel (SUS303/304) | - | - | - | Steel | - | - | - | - | - | - | Steel | - | - | - | Steel | Steel | Stainless Steel (SUS303/304) | - | Stainless Steel (SUS303/304) | - | - | - | - | - | - | - | - | - | - | - | - | Stainless Steel (SUS303/304) | - | - | - | - | - | - |
| Screw Type | Metric (Coarse) Thread | - | - | - | - | Metric (Coarse) Thread | - | - | - | - | - | - | - | Metric (Fine) Thread | - | - | - | Metric (Coarse) Thread | - | - | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | - | - | - | - | - | Metric (Coarse) Thread / Unified (Coarse) Thread | Metric (Coarse) Thread / Unified (Coarse) Thread | Metric (Coarse) Thread | Metric (Fine) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread | - | - | - | - | - | - | - | - | - | - |
| Length L (after insertion) (D = Thread Dia. M) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Notch | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ～ #8-32 | 1/4 ～ 5/8 | - | - | - | 1/2 ～ #10-24 | - | - | - | - | - | - | - | - | - | - |
| Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | Box, Pkg. | - | - | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Screw Dia. M (after insertion)(mm)
-
Type
-
Material
- Steel
- Stainless Steel (SUS303/304)
- Stainless Steel (SUS316)
- Stainless Steel (SUS430F)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Length L (after insertion) (D = Thread Dia. M)
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Notch
-
Thread Dia. (After inserted), Unified(inch)
-
Shape
-
Sales Unit
- Low Quantity (Available beginning with 1 pc.)
- Box, Pkg.
Narrow search by specifying Manufacturer
-
- SUNCO (24)
- ACCURATE (22)
- RECOIL (6)
- KKV (5)
- TSUGAMI (5)
- HIROSUGI-KEIKI (2)
- JAPAN DRIVEIT (0)
- NIPPON SPREW (0)
- HIROSUGI SEIKI (0)
- KS SANGYO (0)
- SEL JAPAN (0)
- ESCO (0)
- TOKAI METAL INDUSTRY (0)
- BOHSEI (0)
CAD
-
- 2D
- 3D
Related Categories to Insert
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?