Drain Traps, Steam Traps（Nominal Diameter：15A）

• 

  Drain Separator FX Series

  CKD

  ·It is a lightweight and compact condensate separator. [Fluid Used]·Gas.

  CAD ：

  2D / 3D

  Standard Price:	SGD 81.04-
  Days to Ship:	6 Day(s) or more

• 

  Ball Float Type Air Trap, AGC1V Type

  MIYAWAKI

  [Features]
  ・ Piping cost can be reduced because no pressure equalizing pipe is required
  ・ Vertical installation allows installation in a small space
  · Made of all stainless steel and has excellent corrosion resistance
  [Applications]
  ・ Suitable for air piping, after-cooler, receiver tank, etc.

  Standard Price:	SGD 531.86-
  Days to Ship:	18 Day(s) or more

• 

  Ball Float Steam Trap, G20 Type

  MIYAWAKI

  [Features]
  ・ Ideal for steam process line: Since the valve opening is adjusted according to the amount of condensate generated, the condensate is continuously discharged without being accumulated on the primary side
  ・ Shorter rise time: The air at the initial stage of ventilation and low-temperature condensate are automatically discharged. In addition, the diaphragm type air vent that follows the saturation temperature also deals with air and vapor obstacles
  ・ Energy saving design: High-precision polishing float and 3 point support mechanism realizes high sealing performance and suppresses steam loss even in the case of extremely small amount of condensate
  ・ It supports condensate recovery: It has a high back pressure tolerance and can be used for condensate recovery
  [Applications]
  ・ Food equipment, cleaning equipment, air conditioning equipment, etc.

  Standard Price:	SGD 358.95
  Days to Ship:	18 Day(s) or more

• 

  Diaphragm Type Steam Trap, DC1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics following the saturation temperature, a wide pressure range can be used without adjustment
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. Also functions as an air vent
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small and maintenance can be easily performed
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Standard Price:	SGD 274.48
  Days to Ship:	18 Day(s) or more

• 

  BELL-MIGHTY Steam Trap, ES5/E5/8N/8B/10/12N Type

  MIYAWAKI

  [Features]
  ・ Double air-water separation (U-shaped passage of lift fitting structure and function of downward bucket) ensures air-water separation, and no steam entrapment leakage, etc.
  ・ Since the water is discharged intermittently or continuously depending on the amount of condensed water generated, there is no accumulation of condensed water on the primary side
  ・ Ideal almighty setting for various applications such as equipment, steam main pipes, etc.
  [Applications]
  ・ Plant industry
  ・ Food manufacturing
  ・ Cleaning, air conditioning, etc.

  Standard Price:	SGD 343.99-
  Days to Ship:	18 Day(s) or more

• 

  BELL-MIGHTY Steam Trap, ER105/110/116/120/25 Type

  MIYAWAKI

  [Features]
  ・ Double air-water separation (U-shaped passage of lift fitting structure and downward bucket function) ensures air-water separation, and there is no steam entrapment leakage, etc.
  ・ Since the water is discharged intermittently or continuously depending on the amount of condensed water generated, there is no accumulation of condensed water on the primary side
  ・ It is an almighty design ideal for machinery equipment
  [Applications]
  ・ Machinery/equipment
  ・ Insulation
  ・ Heating / air conditioning

  Standard Price:	SGD 1,529.18-
  Days to Ship:	18 Day(s) or more

• 

  Ball Float Steam Trap, GC1 Type

  MIYAWAKI

  [Features]
  ・ Energy saving design (Orifice self-adjusting continuous discharge float type): It achieves high sealing performance by using a high-precision polishing float. Reduces steam loss
  ・ Automatic blow-off mechanism (Built-in bimetal): Automatically discharges air and low-temperature condensate at the beginning of ventilation
  ・ Stainless Steel: All parts except bimetal are made of stainless steel which is resistant to corrosion and has excellent durability
  ・ Compact design: The number of parts is small and maintenance and inspection can be performed easily
  [Applications]
  ・ Steam transport pipe
  ・ Steam trace, etc.

  Standard Price:	SGD 497.92-
  Days to Ship:	18 Day(s) or more

• 

  Super Drain DB1000/DB3000 Series

  CKD

  [Features]·A condensate discharger that has a highly reliable liquid level sensor.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,026.91
  Days to Ship:	6 Day(s) or more

• 

  A3N/AF3N disk/steam trap/up to 1.6 MPaG A3N

  TLV

  [Features]
  ·The steam heating condensate cooling type double lid structure reduces steam loss through reliable operation.
  ·The built-in bimetal type automatic blow-off mechanism shortens start-up time.
  ·Wear parts such as valves and valve seats can be replaced as a unit.
  [Applications]
  ·General purpose applications that do not require temperature control.
  ·Steam main pipe, high temperature tracing, insulation (jacket), tank heating for insulation, etc.

  Standard Price:	SGD 360.52
  Days to Ship:	7 Day(s) or more

• 

  Disc Type Air Trap, AV Type

  MIYAWAKI

  [Features]
  ・ Bypass piping can be omitted and it is cost-effective
  ・ By operating the handle to open the blow valve, scale and oil can be easily removed even during operation
  ・ With ideal on and off operation, condensate is discharged quickly.
  ・ Maintenance can be done easily by unitizing the main parts
  [Applications]
  ・ Suitable for air piping, after-cooler, receiver tank, etc.

  Standard Price:	SGD 412.69
  Days to Ship:	18 Day(s) or more

• 

  Combined Disc Type Steam Trap and Bypass Valve, SV-N Type

  MIYAWAKI

  [Features]
  ・ A bypass circuit is formed inside the trap with a single handle operation due to the interior of the blow valve
  ・ By omitting bypass piping, piping material costs and labor costs can be reduced. Also, the construction period can be significantly shortened
  ・ The main part of the trap (cap, disc, seat) is unitized, and the newly designed cartridge can be easily replaced, so maintenance can be performed in a very short time
  ・ The main part of the trap is designed to keep warm by using the re-evaporated steam of condensate of drainage water, so there is no blanking of the disc and it has excellent durability
  ・ The automatic blow-off mechanism quickly discharges complex water in the early stages of ventilation, shortening the equipment start-up time. Also, there is almost no air obstruction during ventilation
  [Applications]
  ・ Ideal for cleaning equipment, food equipment, dyeing equipment, etc.

  Standard Price:	SGD 432.40-
  Days to Ship:	4 Day(s) or more

• 

  Diaphragm Type Steam Trap, DL1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics following the saturation temperature, a wide pressure range can be used without adjustment
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. Also functions as an air vent
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small and maintenance can be easily performed
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Standard Price:	SGD 274.48
  Days to Ship:	18 Day(s) or more

• 

  Disc Type Steam Trap, SC31 Type

  MIYAWAKI

  [Features]
  ・ Stainless Steel: Parts other than bimetal and gasket are made of stainless steel and have excellent durability
  ・ No restrictions on mounting orientation: It can be used either vertically or horizontally
  ・ Automatic blow-off mechanism: The interior bimetal smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ Compact design: The number of parts is small and maintenance and inspection can be performed easily
  [Applications]
  ・ Food equipment
  ・ Cleaning equipment
  ・ Steam transport pipes, small heat exchangers, etc.

  Standard Price:	SGD 333.80
  Days to Ship:	18 Day(s) or more

• 

  Separator, H5 Type

  MIYAWAKI

  [Features]
  ·It separates and removes water droplets generated in steam pipes and condensate flowing in the bottom, and supplies high-quality dry steam.
  ·The tornado method (centrifugal separation method) is used to maintain the air-water separation ability even if the load fluctuates.
  ·The compact design makes it easy to systematize with pressure reducing valves and steam traps.
  ·It can also be used as an air separator.

  Standard Price:	SGD 411.14
  Days to Ship:	10 Day(s) or more

• 

  A3N/AF3N disk/steam trap/up to 1.6 MPaG AF3N

  TLV

  [Features]
  ·The steam heating condensate cooling type double lid structure reduces steam loss through reliable operation.
  ·The built-in bimetal type automatic blow-off mechanism shortens start-up time.
  ·Wear parts such as valves and valve seats can be replaced as a unit.
  [Applications]
  ·General purpose applications that do not require temperature control.
  ·Steam main pipe, high temperature tracing, insulation (jacket), tank heating for insulation, etc.

  Standard Price:	SGD 476.85
  Days to Ship:	7 Day(s) or more

• 

  Disc Type Air Trap, S31N Type

  MIYAWAKI

  [Features]
  ・ The automatic blow-off mechanism significantly speeds up the startup time. Smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ No restrictions on mounting orientation
  ・ Unit replacement of main parts is possible
  [Applications]
  ・ Food and cleaning equipment
  ・ Steam transport pipe
  ・ General equipment such as heat exchangers

  Standard Price:	SGD 318.11-
  Days to Ship:	4 Day(s) or more

• 

  Combined Disc Type Steam Trap and Bypass Valve, SV1 Type

  MIYAWAKI

  [Features]
  ・ A bypass circuit is formed inside the trap with a single handle operation due to the interior of the blow valve
  ・ By omitting bypass piping, piping material costs and labor costs can be reduced. Also, the construction period can be significantly shortened
  ・ The main part of the trap (cap, disc, seat) is unitized, and the newly designed cartridge can be easily replaced, so maintenance can be performed in a very short time
  ・ The main part of the trap is designed to keep warm by using the re-evaporated steam of condensate of drainage water, so there is no blanking of the disc and it has excellent durability
  [Applications]
  ・ Ideal for cleaning equipment, food equipment, dyeing equipment, etc.

  Standard Price:	SGD 411.46
  Days to Ship:	5 Day(s) or more

• 

  Miniature Disc Type Steam Trap, SD1 Type

  MIYAWAKI

  [Features]
  ・ No restrictions on mounting orientation
  ・ Excellent energy saving effect due to air insulation
  ・ Excellent durability due to all stainless steel
  ・ It can be used in a wide pressure range
  ・ Ultra compact and lightweight design makes installation and maintenance easy
  [Applications]
  ・ Steam trace
  ・ Instrumentation/commercial steam iron, etc.

  Standard Price:	SGD 219.91
  Days to Ship:	4 Day(s) or more

• 

  Ball Float Steam Trap, GC1V Type

  MIYAWAKI

  [Features]
  ·Energy-saving design (orifice self-adjusting continuous discharge float type) and high-precision ground float achieve high sealing performance. Reduces steam loss.
  ·Automatic blow-off mechanism (built-in bimetal) automatically discharges air and low-temperature condensate at the beginning of ventilation.
  ·All parts, except stainless steel and bimetal, are made of stainless steel that is resistant to corrosion and has excellent durability.
  ·Compact design, few parts, easy maintenance and inspection.
  [Applications]
  ·Steam transport pipe.
  ·Steam trace etc.

  Standard Price:	SGD 497.92-
  Days to Ship:	18 Day(s) or more

• 

  Ball Float Type Steam Trap, G11N/G12N Type

  MIYAWAKI

  [Features]
  ·By adopting a diaphragm-type air vent, the start-up time can be greatly shortened. In addition, air vents that follow saturation temperature can deal with air disturbances and steam disturbances.
  ·The rolling valve mechanism (new SCCV) has been adopted for excellent sealing performance and durability.
  ·Since the internal unit is attached to the cover, there is no need to remove the trap body from the piping, making maintenance easy.
  [Applications]
  ·Dyeing equipment, cleaning equipment.
  ·Food equipment, autocreep.
  ·Air conditioners, cylinder dryers, various heat exchangers, etc.

  Standard Price:	SGD 677.38
  Days to Ship:	18 Day(s) or more

• 

  Diaphragm Type Steam Trap, DV1 Type

  MIYAWAKI

  [Features]
  ・ Since a large capacity bypass valve is built-in, bypass piping is not required and the product and piping construction costs can be greatly reduced. You can shorten start-up, remove scale, and take emergency measures in case of temperature failure
  ・ The main body and essential materials are made of stainless steel and have excellent corrosion resistance
  ・ Condensate is discharged at a temperature lower than the saturation temperature, so there is no steam entrapment during operation
  ・ Due to the valve opening temperature characteristics that follow the saturation temperature, a wide pressure range can be used without adjustment. Air is discharged as well as condensate, which shortens the equipment startup time
  ・ With a simple and compact design, the number of parts is small and maintenance and inspection is easy. It can be installed in a small space and can be used vertically or horizontally
  [Applications]
  ・ Suitable for food / bio equipment, small heat exchanger / tank heating, steam main pipe / steam trace / cleaning equipment, etc.

  Standard Price:	SGD 417.01
  Days to Ship:	18 Day(s) or more

• 

  Diaphragm Type Steam Trap, DF1 Type

  MIYAWAKI

  [Features]
  ・ Since it operates at a temperature below the saturation temperature, there is no steam leakage. Due to the operating characteristics that follow the saturation temperature, a wide pressure range can be used without adjustment.
  ・ Quickly discharges low-temperature condensate and air at the beginning of aeration. It also functions as an air vent.
  ・ It can be installed in a small space, and can be installed in both vertical and horizontal pipes. The number of parts is small, and maintenance and inspection can be easily performed.
  [Applications]
  ·Suitable for food/bio equipment, small heat exchanger/tank heating, steam main pipe/steam tracing/cleaning equipment, etc.

  Standard Price:	SGD 288.73-
  Days to Ship:	18 Day(s) or more

• 

  Disc Type Steam Trap, S55 Type

  MIYAWAKI

  [Features]
  ・ Improvement of energy saving: It achieved valve closing below the steam saturation temperature, significantly reducing steam entrainment and leakage
  ・ Improved durability: Further improved durability of the valve seat (SUS)
  ・ Lightweight and miniaturization: The manufacturer is aiming to reduce costs through a lightweight and compact design
  ・ It uses an automatic blow-off mechanism: The interior bimetal smoothly discharges the air and low-temperature condensate at the beginning of ventilation
  [Applications]
  ・ High temperature / high pressure steam main pipe
  ・ Equipment

  Standard Price:	SGD 527.45-
  Days to Ship:	9 Day(s) or more

• 

  Disc Type Steam Trap, SU2N/SU2H Type

  MIYAWAKI

  [Features]
  ・ The automatic blow-off mechanism significantly speeds up the startup time. Smoothly discharges low-temperature condensate and air at the beginning of ventilation
  ・ No restrictions on mounting orientation
  ・ Face to face can be made to order
  [Applications]
  ・ Steam transport pipe
  ・ Steam trace

  Standard Price:	SGD 373.41-
  Days to Ship:	18 Day(s) or more

• 

  Separator, H3 Type

  MIYAWAKI

  [Features]
  ·It separates and removes water droplets generated in steam pipes and condensate flowing to the bottom of pipes, and supplies high-quality dry steam.
  ·By adopting a baffle system (impingement type), the air-water separation capacity does not decrease even if the load fluctuates.
  ·The compact design makes it easy to systematize with pressure reducing valves and steam wraps.
  ·It can also be used as an air separator.
  [Applications]
  ·Steam and water separation for steam and air piping.

  Standard Price:	SGD 288.73
  Days to Ship:	18 Day(s) or more

Loading...