Rotary Actuators（Oscillation Angle A：90°）

• 

  Rotary Actuator, Vane Type, CRB2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Basic Rotary Table, Vane Type, MSUB Series

  SMC

  A rotary actuator with a lightweight and compact table, suitable for robot hands.
  [Features]
  · Free mount type.
  & nbspCan be mounted in 3 directions; axial, lateral, vertical.
  · Single vane and double vane types now standard.
  · The double vane type has the same dimensions as the single vane type.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Rotary Table, Rack And Pinion Type, CRA1 Series

  SMC

  [Features]
  · The model D-M9□ compact auto switch can be equipped.
  · Overall width reduced by up to 14 mm.
  · Mountable on 2 surfaces.
  · Auto switch can be mounted from the front.
  · Weight reduced by up to 14%.
  · Mounting compatibility with existing models.
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Can be mounted in a way that is suitable for the operating conditions/environment.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Rotary Actuator, Vane Type, CRB1 Series

  SMC

  [Features]
  · Works with the model D-M9□ compact auto switch.
  · Highly reliable.
  & nbspSupports thrust and radial loads and uses bearings.
  · The body can be mounted directly.
  · 2 types of port location; side ported or axial ported.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Compact Rotary Actuator, Rack And Pinion Type, CRQ2 Series

  SMC

  [Features]
  · Uses internal cushioning.
  · The main body can also serve as a flange.
  · With angle adjustment mechanism (each rotation end ±5°).
  · 360° rotating angle type.
  · Piping can be installed from one end.
  · 2 auto switches can be mounted on the same side (mountable on both sides).
  · A double piston design free from backlash.
  · Shaft type: Supports both single and double shafts.
  · Centering is easy when mounting the body.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  LER Series Electric Rotary Table

  SMC

  Low-profile rotary actuator.
  [Features]
  · Positioning repeatability: ±0.03° (high-precision type).
  · Rotation angle: 320° (310°), 180°, 90°. *The value in parentheses is for the LER10.
  · Shockless / high-speed actuation.
  · Possible to set speed, acceleration/deceleration and positioning up to 64 points.
  · Energy-saving product: Automatic 40% power reduction after the table has stopped.
  · Step motor (servo 24 V DC).

  CAD ：

  2D / 3D

  Days to Ship:	22 Day(s) or more

• 

  Hi-Rotor/Standard, PRN Series

  KURODA PNEUMATICS

  This is a hi-rotor with flexible mount type that can be mounted in any direction freely, using the mounting holes located on the body.

  CAD ：

  2D

  Standard Price:	SGD 326.73-
  Days to Ship:	9 Day(s) or more

• 

  Rotary Table Rack Pinion Type MSQ Series With External Absorber. Size: 10 to 30·50

  SMC

  By shortening the effective stroke of the shock absorber, absorption time is shortened, making it possible to improve the takt time.
  [Features]
  · 4 to 10 times more allowable kinetic energy.
  & Nbsp2 types of shock absorber are available, for low energy and high energy.
  · Reduced overall length.
  & NbspThere are no protrusions from the adjusting bolts or internal shock absorbers, reducing the longitudinal mounting space.
  · The table height is the same for both types (types with adjustment bolts and types with internal shock absorber).

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom
  
  [21-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
  ・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Small High Rotor / Standard Type, PRNA Series (Single Vane / Double Vane)

  KURODA PNEUMATICS

  Prevents air leakage, improves the minimum operating pressure from 0.2MPa to 0.1MPa, and doubles the maximum oscillation time, thereby increasing the scope of possible applications. 2MPato 0.1MPa and extends the longest oscillating time to 2 times more than traditional. Controls ejection phenomenon to obtain smooth operation.

  CAD ：

  2D

  Standard Price:	SGD 184.54-
  Days to Ship:	7 Day(s) or more

• 

  Free Mount Type Rotary Actuator, Vane Type, CRBU2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  MSUA Series Rotary Table: High-Precision Type, Vane Type

  SMC

  A rotary actuator with a lightweight and compact table, suitable for robot hands.
  [Features]
  · High precision and high rigidity.
  · Improved table deflection accuracy: 0.03 mm or less.
  · Easy alignment when mounting the load.
  · Easy alignment when mounting the body.
  · Angle adjustable.
  · Disengageable.
  · Auto switch capable.
  · Vane type.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  With angle adjuster.
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Low Speed Rotary Table, Rack And Pinion Type, MSQX Series

  SMC

  [Features]
  · Possible to transfer workpieces at low speeds.
  · Achieves stable motion at 5s/90°.
  & nbspSmooth motion without stick-slip phenomenon.
  · Rotation time adjustment range: 1 to 5 (s/90°).

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Mini Rotary Actuator CRJ Series

  SMC

  SMC rotary actuator
  
  [Features]
  · Compact and lightweight
  · Flexible mounting
  Can be mounted from the top, bottom or sides
  · Supports both front and side porting
  · Improved allowable load
  Uses a large roller bearing and large diameter output shaft
  to ensure improved compactness and rigidity
  · Even with a single-rack design, its special construction helps minimize backlash from the output shaft

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series

  SMC

  Rotary actuator with solenoid valve.
  [Features]
  ·2 types of port positions, body side and axial direction
  ·Mounting method: Direct mounting / foot type mounting
  ·Auto switch: None (no symbol), with auto switch (D)
  ·Size: 50, 63, 80, 100
  ·Vane type: Single vane, double vane
  ·Rotating angle: 90°, 100°, 180°, 190°, 270°, 280°, 45°, 135°

  Days to Ship:	46 Day(s) or more

• 

  Table Type Rotary Actuator GRC/GRC-K Series

  CKD

  Rack and pinion type table shape rotary actuator achieves direct high load mounting and high position accuracy with a bearing guide.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  With angle adjuster.
  · · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Drive equipment oscillation actuator rotary actuator piston type RAT series

  KOGANEI

  Light weight and compact. High accuracy with bearings. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · High accuracy with bearings.
  · Easy to use table type with work mounting area.
  · The oscillating end can be adjusted by ±5° by adjusting a amount a rubber stopper or shock absorber is screwed in.
  · The oscillating degrees and piping can be adjusted from one direction for all models.
  · Also, wiring can be pulled in the same direction using a sensor switch on the lead line (except for RAT5).
  · Can pipe in 4 directions.
  · Easy for piping in small areas and work edges.
  · Common 90° specifications and 180° specifications with positioning holes and mounting holes.
  · Only the sizes of longitudinal direction are different so it is easy to substitute the 90° specifications with 180°.
  · Mounting grooves for the sensor switches are placed on 2 surfaces (RAT5 is on one surface)

  CAD ：

  2D / 3D

  Standard Price:	SGD 471.48
  Days to Ship:	4 Day(s) or more

• 

  CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type

  SMC

  A rotary actuator that can be mounted according to the operating conditions.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Angle can be adjusted to the desired level in a range of up to 90°.
  · CRA1: basic type / CDRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series

  SMC

  [11-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom

  Days to Ship:	46 Day(s) or more

• 

  Rotary Cylinder CRM Series - Adjustable Angle w/ Sensor - Flanged Type

  CHELIC

  MISUM-VONA products are carefully selected products from rapidly growing Asian manufacturers based on the needs of our customers. Choose the product that best suits your current needs. Founded in 1988, Cheric Taiwan pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D

  Standard Price:	SGD 200.46-
  Days to Ship:	19 Day(s)

• 

  CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type

  SMC

  Solenoid valve and rotation speed adjustment function are integrated.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · Replaceable cushion seal, easy adjustment of cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Numerous shaft shape variations allow mounting to suit the operating conditions.
  · Part number is set for the angle adjustable type.
  · CVRA1: basic type / CDVRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  Days to Ship:	46 Day(s) or more

• 

  CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator

  SMC

  Compact, low-speed rotary actuator capable of low-speed transfer of workpieces.
  [Features]
  · Achieves stable motion at 5 s/90°.
  · Smooth motion without sticking or slipping.
  · Rotation time adjustment range: 1 to 5 s/90°.
  · Standard type: CRQ2 / With auto switch: CDRQ2.
  · Size: 10, 15, 20, 30, 40.
  · Port types: G1/8, NPT1/8, NPTF1/8, Rc1/8, M5.

  CAD ：

  2D / 3D

  Days to Ship:	46 Day(s) or more

• 

  ATEX Directive, Rotary Actuator, Free Mount Type, 55-CRBU2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  Rotary cylinder CRM series Angle adjustment and sensor Standard model

  CHELIC

  [Features]·The fluid used is air. ·This is a double-acting type rotary cylinder.

  CAD ：

  2D

  Standard Price:	SGD 194.62-
  Days to Ship:	19 Day(s)

• 

  Rotary Cylinder CRH Series - Standard Type/Inner Hole Type

  CHELIC

  Brand-name products provided by MISUMI-VONA are offered based on customer needs and have been carefully selected from the offerings of Asian manufacturers showing remarkable growth. Please select the right item for your individual usage environment. Founded in 1988, Taiwan CHELIC Corporation's pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D

  Days to Ship:	19 Day(s)

• 

  Rotary Table, Vane Type Rechargeable Battery Compatible 25A-MSUB Series

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating and zinc plating with copper base are not used. (Electrolytic nickel plating is used. )
  This product uses low dew point compatible grease, can be used at -70°C, improved performance in low dew point environment.

  Days to Ship:	Quote

• 

  ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  Selex Rotary RRC Series

  CKD

  Rack and pinion type small rotary actuator.

  CAD ：

  2D

  Days to Ship:	19 Day(s) or more

• 

  Rotary Cylinder CRBM Series

  CHELIC

  Brand-name products provided by MISUMI-VONA are offered based on customer needs and have been carefully selected from the offerings of Asian manufacturers showing remarkable growth. Please select the right item for your individual usage environment. Founded in 1988, Taiwan CHELIC Corporation's pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D

  Days to Ship:	19 Day(s)

• 

  Rotary Cylinder CRP Series

  CHELIC

  Brand-name products provided by MISUMI-VONA are offered based on customer needs and have been carefully selected from the offerings of Asian manufacturers showing remarkable growth. Please select the right item for your individual usage environment. Founded in 1988, Taiwan CHELIC Corporation's pneumatic equipment parts have received high praise on the world market. Their cylinder quality gets particularly high reviews, and is used in various fields.

  CAD ：

  2D

  Days to Ship:	19 Day(s)

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	46 Day(s) or more

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  ATEX Directive, Rotary Actuator, Vane Type 56-CRB2 Series, ATEX Category 3

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

• 

  ATEX Directive, Rotary Actuator, Free Mount Type, 56-CRBU2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	Quote

Loading...