Adjuster Pads

• • Recommendation

  

  MiSUMi Economy

  Anchors For Aluminum Frames

  MISUMI

  Anchors For Aluminum Frames
  These anchors for aluminum extrusions are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
  [Feature]
  - Body Height (mm.) : 170 and 210
  - Mounting Direction : Left and Right side
  - Applicable For Aluminum Extrusions Series : 30/40 and 40/50/60
  - Material : Carbon steel
  - Surface Treatment: Zinc Plating
  [Application]
  It is commonly utilized to connect and assemble aluminum extrusions
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 15.02-
  Days to Ship:	Same day

• • Recommendation

  

  MiSUMi Economy

  Inclined Anchors For Aluminum Frames

  MISUMI

  • Volume Discount

  Standard Price:	SGD 9.10-
  Days to Ship:	Same day or more

• 

  Leveling Foot

  NIC AUTOTEC

  Leveling Foot
  This leveling foot is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes and materials to choose from.
  [Feature]
  - Height Minimun / Maximum (mm.): 18.2 and 159
  - Outside Diameter Minimun / Maximum (mm.): 25 and 60
  - Applicable For Aluminum Extrusions Series : M4, M6 and M8
  - Material : SUS304, SS400, SPCC and Low Carbon Steel with Nylon base
  - Weight (g): 128
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 8.67-
  Days to Ship:	Same day or more

• 

  Leveling Mounts/Heavy Load Type

  MISUMI

  Leveling Mounts/Heavy Load Type
  This leveling mount is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes and materials to choose from.
  [Feature]
  - Bottom Diameter (mm.) : 60 and 70
  - Thread Size : M10, M12, M16, M20 and M24
  - Screw Length : The size is configurable between 80 to 300 mm, and the minimum length can be increased by increments 10 mm.
  - Material : SS400 Equivalent and SUS304 Equivalent
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Torque Hinges - Fixed Torque Type

  MISUMI

  Space saving type leveling mount. When mounted directly on the aluminum extrusion, the pad does not protrude from the outer dimensions.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Rubber Cushion

  NIC AUTOTEC

  Rubber Cushion
  This rubber cushion is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 20 X 12
  - Applicable Series : M4
  - Material : SBR, SUS430
  - Color : Black
  - Weight (g): 4
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 2.37
  Days to Ship:	Same day

• 

  Leveling Mount Unit

  MISUMI

  Leveling Mount Unit
  This leveling mount is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  
  [Feature]
  - Set components : Plate, Leveling mounting, Screw and Nut
  - Applicable For Aluminum Extrusions Size : 5-2020, 6-6060, 6-5050, 6-3030, 8-9090, 8-8080, 8-4040 and 8-4545
  - Remark : Washer are included with HAJPS8080 only
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.13-
  Days to Ship:	4 Day(s) or more

• 

  Leveling Mounts/Space Saving Type

  MISUMI

  Leveling Mounts/Space Saving Type
  This leveling mount is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  [Feature]
  - Bottom Diameter (mm.) : 28, 38, 48 and 58
  - Thread Size : M8 and M12
  - Screw Length : 20, 30, 50, 80 and 100
  - Material : SS400 Equivalent
  - Applicable For Aluminum Extrusions Size : 30, 40, 50 and 60
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.32-
  Days to Ship:	4 Day(s) or more

• 

  Anchors/Heavy Type

  MISUMI

  "With reinforced ribs, thicker than the Standard Type. 25mm increased height enables the product to be mounted in higher positions."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 25.97-
  Days to Ship:	Same day or more

• 

  Line5/6 Leveling Pad (L-LPS-M)

  IMAO CORPORATION

  Line5/6 Leveling Pad (L-LPS-M)
  This leveling pad,which can be tilted up to 15°, is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  [Feature]
  - Bottom Diameter (mm.) : 19.5
  - Thread Size : M5X0.8 and M6X1
  - Overall Length (mm.) : 43.6, 48 and 63
  - Applicable For Aluminum Extrusions Series : Line5 and Line 6
  - Material :
  Pad - Polyamide
  Thread - Steel
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Standard Price:	SGD 12.64-
  Days to Ship:	9 Day(s)

• 

  Line5 Leveling Pad 40/60/80 (LPS)

  IMAO CORPORATION

  [Foot Parts]
  The pad inclines.
  
  [Material]
  · Pad: LPS40: Polyamide (Glass Fiber Reinforced), LPS60/LPS80: Zinc Die-Cast
  · Thread: Steel
  

  CAD ：

  2D

  Standard Price:	SGD 15.78-
  Days to Ship:	Same day or more

• 

  Ball Type Adjuster

  YUKIGIKEN

  Ball type adjuster.
  [Features]
  ・ It supports a distorted floor surface due to the swing mechanism
  ・ If the floor coating has low solvent resistance (single-component acrylic floor coating, etc.), the rubber of the adjuster may stick to the floor and the rubber bonding may come off
  ・ Since the foot part is a built-in type, it may come off. If it comes off, press-fit again
  ・ Material, thread section: SS400, bottom: Rubber
  ・ Surface treatment: Nickel plating
  [Applications]
  ・ It is used to adjust the level of the machine base and partition

  CAD ：

  2D

  Standard Price:	SGD 13.85-
  Days to Ship:	4 Day(s) or more

• 

  Line6 Rubber Insert 6 L6-RIT30

  IMAO CORPORATION

  [Foot Parts]
  Use for anti-vibration, anti-skid, and floor protection.
  Dedicated for L6-LPS.
  
  [Material] ... NBR (Nitrile Rubber)
  [Hardness] Shore A80
  [Mass] 2.8 g

  CAD ：

  2D

  Standard Price:	SGD 7.05
  Days to Ship:	9 Day(s)

• 

  Floor Stoppers for Aluminum Frames

  MISUMI

  Floor Stoppers for Aluminum Frames
  This floor stoppers is commonly utilized to assemble aluminum extrusions. They provide a wide range of sizes to choose from.
  [Feature]
  - Mounting Height (mm.) :
  AFLOCK65A,B Min = 85 , Max = 90
  AFLOCK75A,B Min = 90 , Max = 101
  - Compatible For Aluminum Extrusions :
  - 25, 30 Square (Single-Row Slot)
  - 40 Square (Single-Row Slot)
  - Material : SPHC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 64.69-
  Days to Ship:	4 Day(s) or more

• 

  Rubber Feet (Non-Migratory Specifications)

  YUKIGIKEN

  Rubber Feet (Non-Migratory Specifications)
  This rubber seat is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 20 X 8
  - Thread Size : M4
  - Material : EPDM
  Main Body - SBR
  Washer - SPCC
  - Applicable For : 25 and 40 frame series
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D

  Standard Price:	SGD 2.05-
  Days to Ship:	4 Day(s) or more

• 

  Small Adjuster

  YUKIGIKEN

  Compact design adjuster.
  [Features]
  ・ A low profile design that does not damage the housing design
  ・ With a cross-head that is convenient for mounting
  [Applications]
  ・ It is used as an adjuster for small housings

  CAD ：

  2D

  Standard Price:	SGD 6.69
  Days to Ship:	4 Day(s) or more

• 

  Stainless Steel Small Adjuster

  YUKIGIKEN

  Small stainless steel adjuster suitable for laminar flow cabinet, etc.
  [Features]
  ・ The body is made of all-stainless steel with excellent corrosion resistance
  ・ Corresponding to a distorted floor surface by a swing mechanism of about 10°
  ・ Due to the dual structure of the main body and the bottom, the height can be adjusted by turning the main body by hand even after installation
  ・ The bottom is made of non-slip elastomer
  [Applications]
  ・ Suitable for housing, etc., in a clean environment

  CAD ：

  2D

  Standard Price:	SGD 17.20
  Days to Ship:	4 Day(s) or more

• 

  Adjuster

  YUKIGIKEN

  Adjuster
  This adjuster is commonly utilized to assemble aluminum extrusions. It is designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Height (mm.) : 70, 97.5 and 100
  - Outside Diameter (mm.) : 40 x 50
  - Thread Size : M10 and M16
  - Material :
  Shaft - SWRM
  Washer - Nylon
  Cover - SPCC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Standard Price:	SGD 11.21-
  Days to Ship:	4 Day(s) or more

• 

  Cost-Effective Type, Adjuster

  YUKIGIKEN

  Adjuster with excellent cost-effectiveness.
  [Features]
  ・ Large pad diameter for stability
  ・ Material, thread section: SS400, bottom: Rubber
  · Surface treatment: zinc plating
  · Weight: 300 g
  ・ Allowable load: 300 kgf
  [Applications]
  ・ It is used to adjust the level of the machine base and partition

  CAD ：

  2D

  Standard Price:	SGD 9.81
  Days to Ship:	4 Day(s) or more

• 

  Line5/Line6/Line8 Clamping Plate CLP

  IMAO CORPORATION

  [Foot Parts]
  For floor fixing of LPS.
  
  [Material] ... Zinc Diecast
  [Processing] ... Paint

  CAD ：

  2D

  Standard Price:	SGD 26.20-
  Days to Ship:	9 Day(s)

• 

  Line5/Line6/Line8 Rubber Insert RIT

  IMAO CORPORATION

  [Foot Parts]
  Use for purposes such as anti-vibration, anti-skid, and floor protection.
  Dedicated for LPS.
  
  [Material] ... NBR (Nitrile Rubber)
  [Hardness] Shore A80

  CAD ：

  2D

  Standard Price:	SGD 7.57-
  Days to Ship:	9 Day(s)

• 

  Line8 Leveling Pad PA LPP8

  IMAO CORPORATION

  [Foot Parts]
  Dedicated for Line 8 profile.
  Height can be adjusted by screwing in the knurled part. Use for the leveling of tables and lightweight objects.
  
  [Material]
  · Pad: Engineering Plastic
  · Thread: Steel
  [Processing]
  · Thread: Zinc Trivalent Chromate

  CAD ：

  2D

  Standard Price:	SGD 26.87
  Days to Ship:	9 Day(s)

• 

  Anchor Stands for Aluminum Extrusions

  MISUMI

  Anchors for Aluminum Frames
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
  [Feature]
  - Types : 2-Vertically-Connected Type and Regular Type
  - Applicable For Aluminum Extrusions Series : HFS6 and HFS8, cannot support HFS8-45
  - Material : SPHC
  - Surface Treatment: Chromate
  - Remark: Screws and nuts are not included
  [Application]
  It is commonly utilized to connect and assemble aluminum extrusions
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.50-
  Days to Ship:	4 Day(s) or more

• 

  Anchors for Aluminum Frames - 4-point Anchor/2-point Anchor

  MISUMI

  Anchors for Aluminum Frames - 4-point Anchor/2-point Anchor
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
  [Feature]
  - Body Height (mm.) : 146
  - Applicable For Aluminum Extrusions Series :
  4-point Anchor Type : HFS6-3030 and HFS6-3060
  2-point Anchor Type : HFS8-4040 and HFS8-4080
  - Material : SPHC
  - Surface Treatment: Trivalent Chromate
  [Application]
  It can be used to make the safety fence unit stand straight
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 19.71-
  Days to Ship:	Same day or more

• 

  Anchors for Aluminum Extrusions

  MISUMI

  Anchors for Aluminum Frames
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the MISUMI brand.
  [Feature]
  - Body Height (mm.) : 169
  - Applicable For Aluminum Extrusions Series : HFS6 and HFS8 ,but cannot support HFS8-45
  - Material : ADC12
  - Surface Treatment: Not Provided
  - Remark: Screws and nuts are not included
  [Application]
  It is commonly utilized to connect and assemble aluminum extrusions
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.32-
  Days to Ship:	Same day or more

• 

  Anchor Bracket (SS400)

  NIC AUTOTEC

  Anchor Bracket (SS400)
  This anchor bracket for aluminum frames is commonly utilized to assemble aluminum extrusions. It provides a wide range of sizes to choose from.
  [Feature]
  - Length (mm.): 75 and 100
  - Width (mm.): 30, 35, 60 and 65
  - Height (mm.) 150 and 200
  - Shape : L type and T type
  - Material : SS400
  - Weight (g): 128
  [Application]
  It is used to securely fixed aluminum frames to various surfaces, such as machine stands, safety fences, and so on
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 18.31-
  Days to Ship:	4 Day(s) or more

• 

  Anchor Plate

  NIC AUTOTEC

  Anchor Plate
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.
  [Feature]
  - Size (Length x Width) (mm.):
  CLAP-60 - 108 X 54
  CLAP-120 - 114 X 54
  - Applicable For Model : CLP-60, CLP-120, CLB-120, CLB-120U and CLBS-120U
  - Surface Treatment: Trivalent Chromate
  - Material : SPCC
  - Remark :When using anchor plates the rubber seat cannot be used.
  [Application]
  It is used to securely fixed aluminum frames to various surfaces, such as machine stands and so on
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.24-
  Days to Ship:	4 Day(s) or more

• 

  Rubber Seat

  NIC AUTOTEC

  Rubber Seat
  This rubber seat is commonly utilized to assemble an adjustable foot for the machine to prevent vibration and also to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.):
  CLGP-60 - 38 X 6
  CLGP-120 - 45 X 6
  - Applicable For Model : CLP-60, CLP-120, CLB-120, CLB-120U and CLBS-120U
  
  - Material : EPDM
  - Color : Grey
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D / 3D

  Standard Price:	SGD 2.86-
  Days to Ship:	4 Day(s) or more

• 

  AG Series Anchor Bracket Set AGBK30A

  NIC AUTOTEC

  AG Series Anchor Bracket Set AGBK30A
  These anchors for aluminum frames are commonly utilized to assemble aluminum extrusions.They are designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Length (mm.): 180
  - Width (mm.): 35
  - Height (mm.) : 150
  - Shape : T Type
  - Material : SS400
  - Surface Treatment : Trivalent Chromate
  [Application]
  It is used to securely fixed aluminum frames to various surfaces, such as machine stands, safety fences, and so on
  

  Standard Price:	SGD 35.04
  Days to Ship:	4 Day(s) or more

• 

  Plastic Foot

  YUKIGIKEN

  Plastic Foot
  This plastic foot is commonly utilized to assemble an adjustable foot for the machine to protect the markings on the floor.
  [Feature]
  - Size (Diameter x Height) (mm.): 23 X 11.5
  - Thread Size : M4
  - Material : Plastic ABS and Felt/Wool
  - Option : With mounting bolt and nut (for 25 series frames and 40 series frames)
  [Application]
  It is commonly utilized to assemble an adjustable foot for the machine
  

  CAD ：

  2D

  Standard Price:	SGD 2.05-
  Days to Ship:	4 Day(s) or more

• 

  Adjuster for Corner

  YUKIGIKEN

  Adjuster for Corner
  This adjustable is commonly utilized to assemble aluminum extrusions. Moreover, this equipment can be brought close to each other or installed in corners.
  [Feature]
  - Pad size LXH (mm.) :
  AC12-F size 45X45
  AC16-F size 57X57
  - Thread Size : M12 X 1.75 and M16 X 2.0
  - Overall Length : 97 for AC12-F and 103 for AC16-F
  - Material :
  Bolt - SWRCH
  Pad - SPCC
  [Application]
  It is used in industrial settings to level the machine on the floor and ensure proper alignment.
  

  CAD ：

  2D

  Standard Price:	SGD 10.01
  Days to Ship:	4 Day(s) or more

• 

  Anchor Bracket (140S, 140W)

  NABESEI

  Anchor Bracket (140S, 140W)
  This anchor bracket is commonly utilized to assemble aluminum extrusions. It is designed for aluminum extrusions from the SUS brand.
  [Feature]
  - Height (mm.) : 140
  - Shape : L Type
  - Type : Double holes
  - Material : SS400
  - Surface Treatment: Trivalent Chromate
  [Application]
  It is used to securely fixed aluminum frames to various surfaces, such as machine stands, safety fences, and so on
  

  CAD ：

  2D

  Standard Price:	SGD 15.56-
  Days to Ship:	6 Day(s) or more

• 

  Anchor Bracket 400

  NABESEI

  NABESEI, Adjuster Pad / Anchor, Anchor Bracket 400

  CAD ：

  2D

  Standard Price:	SGD 33.03
  Days to Ship:	6 Day(s) or more

Loading...