V Belt Pulleys

• 

  Isomec SP Pulley

  NABEYA BI-TECH

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  CAD ：

  2D / 3D

  Standard Price:	SGD 37.55-
  Days to Ship:	4 Day(s) or more

• 

  Standard V-Pulley

  NABEYA BI-TECH

  "Shaft hole, keyway and push screw machining standardized."
  [Features]
  · Japan's first standard inch size product.
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
  · Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 10.20-
  Days to Ship:	4 Day(s) or more

• 

  JIS V-Pulley, B Type

  NABEYA BI-TECH

  Full lineup of V-belt pulleys that conform to JIS B 1854.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway and push screw machining standardized.
  · Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 25.10-
  Days to Ship:	4 Day(s) or more

• 

  JIS V-Pulley, D Type

  NABEYA BI-TECH

  Full lineup of V-belt pulleys that conform to JIS B 1854.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Shaft hole, keyway and push screw machining standardized.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
  · Imbalance tolerance on outer circumference is 0.1% of pulley mass.
  · Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 953.00-
  Days to Ship:	6 Day(s) or more

• 

  JIS V-Pulley A Series

  NABEYA BI-TECH

  Highest quality pulley, with materials together with machining and balance accuracy exceeding JIS standards.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway, and set screw machining standardized.
  · Easy set-up
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JISB1854-1987 "General use V-pulley")
  · Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
  · Surface treatment, for improving corrosion resistance is a electrodeposition coating with beautiful finish.

  CAD ：

  2D / 3D

  Standard Price:	SGD 13.86-
  Days to Ship:	4 Day(s) or more

• 

  JIS V-Pulley, C Type

  NABEYA BI-TECH

  Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway and push screw machining standardized.
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately.
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Imbalance tolerance on outer circumference is 0.1% of pulley mass.
  · Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 50.10-
  Days to Ship:	6 Day(s) or more

• 

  ISOMEC Polydrive Pulley

  NABEYA BI-TECH

  V-belt pulley with high power transmission and large rotation ratio.
  [Features]
  · High transmission efficiency. ISO 9982 compliant.
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Makes it possible to design a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
  ・ Can be attached and removed from shaft and positioned with hex or socket wrench.
  · In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission can be achieved.
  · Set the imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
  · Balancing is adjusted using a balancing machine.
  [Applications]
  · Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 68.67-
  Days to Ship:	7 Day(s) or more

• 

  NS Standard V Pulley A

  KANEMITSU

  Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
  
  [Features]
  · A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
  · High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
  · Dimensional precision to JIS reference standards, with thorough quality control.
  · Groove part shape and dimensions table.
  · Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
  · Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.

  Standard Price:	SGD 10.14-
  Days to Ship:	Same day or more

• 

  Isomekku Bushing

  NABEYA BI-TECH

  Safe and reliable fastening system. Responding to a design change is easy.

  CAD ：

  2D / 3D

  Standard Price:	SGD 20.48-
  Days to Ship:	4 Day(s) or more

• 

  NS Standard V-Pulley B

  KANEMITSU

  Nominal diameter 2 to 30 inches, with 1 to 5 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotation.
  
  [Features]
  · Extensive range of applications, with high level of model configuration, and safety for quality to satisfy user needs.
  · The NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
  · Dimensional precision to JIS reference standards, with thorough quality control.

  Standard Price:	SGD 10.13-
  Days to Ship:	4 Day(s) or more

• 

  Vankin Pulley VK

  NABEYA BI-TECH

  Lightweight V-belt pulley made of sheet metal.
  [Features]
  · Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
  · Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
  · Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 14.70-
  Days to Ship:	6 Day(s) or more

• 

  SNS JIS V Pulley B

  KANEMITSU

  Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.

  Standard Price:	SGD 35.97-
  Days to Ship:	4 Day(s) or more

• 

  Engineering Plastic V-Pulley Idler (VIP)

  IMAO CORPORATION

  [Features]
  · Adaptive V-belt M type, A type, B type resin pulley idler.
  · Integrated ball bearing

  CAD ：

  2D / 3D

  Standard Price:	SGD 17.12-
  Days to Ship:	Same day

• 

  Variable Speed Pulley

  NABEYA BI-TECH

  Fine rotation ratio adjustment. Simple structure, precision machining. No rattling due to micro vibrations / shock loads.

  CAD ：

  2D / 3D

  Standard Price:	SGD 66.10-
  Days to Ship:	7 Day(s) or more

• 

  STB Sheave 3V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  Standard Price:	SGD 32.04-
  Days to Ship:	6 Day(s) or more

• 

  VMG groove gauge for V pulley

  NABEYA BI-TECH

  Gauge for checking wear of pulley V-groove part. Orders can be made for individual shapes, or as a set for each groove shape. A gap has been provided between the gauge and the outer circumference of the pulley and the bottom of the V-groove. Early replacement is recommended for transmission efficiency.

  Standard Price:	SGD 72.60-
  Days to Ship:	7 Day(s) or more

• 

  NS Standard V-Pulley C

  KANEMITSU

  Nominal diameter 4 to 30 inches, with 2 to 6 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable on high-speed rotator.

  Standard Price:	SGD 38.70-
  Days to Ship:	7 Day(s) or more

• 

  SNS JIS V Pulley A

  KANEMITSU

  Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
  
  [Features]
  · SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
  · Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
  · Shaft etc. can be preserved, useful for saving labor.
  · Can also be used for machines with heavy loads and shocks etc.
  · High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
  · As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.

  Standard Price:	SGD 16.60-
  Days to Ship:	4 Day(s) or more

• 

  SNS Power Sheave 3V

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)

  Standard Price:	SGD 22.17-
  Days to Ship:	7 Day(s) or more

• 

  ISOMEC Bushing / Adapter

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by machining a straight hole into the rotating body.

  Standard Price:	SGD 44.70-
  Days to Ship:	7 Day(s) or more

• 

  Wedge Pulley

  NABEYA BI-TECH

  High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
  · Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
  · 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
  · Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 16.53-
  Days to Ship:	6 Day(s) or more

• 

  STB Sheave 5V

  KANEMITSU

  Good balance is a benefit of this narrow width V belt pulley with bushing set, requiring no shaft hole, or key machining. Pulley replacement is easy. Shaft hole diameters standardized to both new JIIS / previous JIS. Material exceeds FC200

  Standard Price:	SGD 143.33-
  Days to Ship:	7 Day(s) or more

• 

  Isomec - bushing bolt Onhub

  NABEYA BI-TECH

  ISOMEC bushing can be used simply by connecting a bolt to the rotating body.

  Standard Price:	SGD 61.91-
  Days to Ship:	7 Day(s) or more

• 

  SNS Power Sheave 5V

  KANEMITSU

  JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø150 to 1000, groove no. 2 to 10. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (large transmission capacity FC250)
  
  [Features]
  · JIS standard sizes in addition to a wide range of intermediate sizing standardized, with free selection of rotation ratio and shaft distance etc., for easy design.
  · JIS B 1855 slim V-pulley dimensions adopted for interchangeability.
  · Material exceeding FC200 (large transmission capacity FC250) used, with various dimensions displaying 100% performance for high precision, vibration, and balance.
  · Compared with previous products (A.B.C.....shape), narrow width V belt (3W, 5V, 8V types), there are many advantages due to the very large transmission capacity of the belt, with high horsepower greatly reducing costs.
  · Due to the compactness of the pulley, it can be used for low speed horsepower not possible due to large sizes with conventional products, and it is now possible to change the chain and gear transmission.
  · Power sheave has enough strength to withstand.
  · Since release, it has been used by many, so can be adopted with confidence.
  · Band-power ACE, and power scrum are interchangeable even when used with groove guide wheels, and max wedge belt.

  Standard Price:	SGD 124.64-
  Days to Ship:	7 Day(s) or more

• 

  STB synchro pulley H

  KANEMITSU

  JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type H, teeth no. 28 (carbon steel) teeth no. 30 (exceeds FC200 material)
  
  [Features]
  · Nominal diameter from 4 to 30 inches, 2 to 6 grooves for rich lineup, and dimensional precision to JIS reference standards, good balance measurements, can be used directly on high-speed rotator.

  Standard Price:	SGD 91.31-
  Days to Ship:	7 Day(s) or more

• 

  STB synchro pulley L

  KANEMITSU

  JIS K6372 standard. Pulley does not require shaft hole and keyway machining. Can be use with toothed belt (synchro belt, timing belt). Toothed type L. Teeth no. 36 (material: carbon steel), teeth no. 40 (material: exceeds FC200)

  Standard Price:	SGD 65.40-
  Days to Ship:	7 Day(s) or more

Loading...