Lamp Fixtures for Inspection（Light Source：Self Emission Type）

• 

  Direct Ring Light (Direct Light) IDR Series

  IMAC

  This general-purpose ring light supports a diverse range of visual inspections.
  [Features]
  · A high concentration of shell type LEDs is mounted, and light can be effectively focused on the center by the angle of the circuit board.
  · The tilt is ideal for inspecting for scratches, edges, and alignment markings.
  · The lineup contains various sizes, from standard outer diameters of 32 mm / internal diameter 10 mm to external diameter 140 mm/ internal diameter 95 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Optimized for character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 297.24-
  Days to Ship:	8 Day(s) or more

• 

  Bar Lighting (Direct Light / Diffused Light) IDBA Series

  IMAC

  General purpose bar lighting.
  It can be used widely, including oblique irradiation and transmission applications.

  CAD ：

  2D / 3D

  Standard Price:	SGD 223.86-
  Days to Ship:	13 Day(s) or more

• 

  Horizontal Opposed Ring Light (Direct Light) IDRA-T Series

  IMAC

  General-purpose ring lighting that can emphasize irregularities by irradiation in the horizontal direction.
  [Features]
  · Shell type LEDs are mounted horizontally.
  · Ideal for edge detection and minute scratch inspection using horizontal irradiation.
  · The lineup contains various sizes, from standard outer diameters of 78 mm / internal diameter 46 mm to external diameter 206 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and fine scratches or dirt.
  · Useful for reading engraved text on metal surfaces.
  · Optimal for circuit board and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 737.60-
  Days to Ship:	13 Day(s) or more

• 

  Square Edgelight Illuminator (Surface Emitting, Thin Type) IFLA/IFL Series

  IMAC

  Thin surface light-emitting fitting.
  Backlight illumination achieves vivid silhouette images. The IFLA series has a 6 mm thickness that allows it to be installed even in places without much space. Energy saving/low heat-generation type with uniform surface emission.

  CAD ：

  2D / 3D

  Standard Price:	SGD 355.91-
  Days to Ship:	8 Day(s) or more

• 

  Coaxial Spot Lighting for Telecentric IV/IHV Series

  IMAC

  Coaxial spotlight.
  Insert into a telecentric lens to be used for coaxial epi-illumination. Ideal for positioning (alignment) in the LCD, semiconductor, and electronic component fields, etc. Various products are available from compact shapes (IV) to high brightness (IHVE).

  CAD ：

  2D / 3D

  Standard Price:	SGD 370.55-
  Days to Ship:	8 Day(s) or more

• 

  Flat Direct Ring Lighting (Direct Light) IDR-F Series

  IMAC

  Lightweight flat-ring lighting that has shell type LEDs mounted horizontally to provide illumination over a wide range.
  [Features]
  · The flat illuminating surface enables illumination over a wide area.
  · Uses a POM case, with a ring with an O.D. of 90 mm and a weight of 85 g. Features a lightweight design that makes it ideal for being moved around as well.
  · Ultra-slim light is also available for dedicated use with the 16 mm diameter telecentric lens (LWD 40, 65).
  · Usable with auxiliary light of a coaxial spotlight source.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for positioning, visual inspection, and character recognition when mounted on the end of robot arms.
  · Convenient for two-dimensional code reading, mounting substrate parts inspection, and alignment mark reading.

  CAD ：

  2D / 3D

  Standard Price:	SGD 370.66-
  Days to Ship:	8 Day(s) or more

• 

  Collimate Light (Pseudo Collimated Light) IBF Series

  IMAC

  Pseudo collimated light source capable of long distance irradiation several tens of meters away.
  [Features]
  · Usable as a backlight in combination with a telecentric lens.
  · Parallel light prevents light wraparound, thus optimizing for shape inspections of transparent items and shape/dimension inspection of screws, etc.
  · Parallel light emission enables illumination tens of meters forward as well.
  · Can be used for factory indicator lights or situations where the equipment environment prevents lighting from being placed nearby.
  · Ideal for local irradiation as light does not spread. Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.
  [Applications]
  · Convenient for size and shape inspections of electronic parts and lead frame dimensions.
  · Ideal for measuring the pitch of connector pins and for edge extraction of substrates and sheets.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,001.69-
  Days to Ship:	18 Day(s) or more

• 

  VXHSL Series Coaxial Vertical Lighting

  SHIMATEC

  Small coaxial illumination equipment with excellent uniformity.
  [Features]
  · Light can be reflected off a flat workpiece by irradiation from the same axis as the camera to make the detected object stand out.
  · The lighting itself is compact but features a wide effective irradiation area.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, PCB alignment, glass, metal, and wafer inspections.
  · Optimal for gloss on metals and glass and for mirror-surfaced workpieces.

  Standard Price:	SGD 1,378.37-
  Days to Ship:	13 Day(s) or more

• 

  LED Lamps- Multi Lightings

  MISUMI

  LED lighting has a longer lifespan than traditional halogen and fluorescent lights. Maintenance frequency can be reduced.

  CAD ：

  2D / 3D

  Standard Price:	SGD 572.78-
  Days to Ship:	9 Day(s) or more

• 

  Low Angle Ring Light (Direct Light) IDR-LA Series

  IMAC

  General purpose ring lighting ideal for scratch inspection/edge detection by illuminating from a low angle.
  [Features]
  · Mounted on direct ring lighting at an angle.
  · Ideal for edge detection and scratch inspection with oblique irradiation.
  · The lineup contains various sizes, from standard outer diameters of 40 mm / internal diameter 15 mm to external diameter 200 mm/ internal diameter 170 mm.
  · Light color: Can be selected from white / red / blue / green.
  [Applications]
  · Ideal for inspecting tablets or powder for foreign matter and scratches or dirt.
  · Useful for reading engraved text on metal surfaces or substrate and sheet edge extraction.

  CAD ：

  2D / 3D

  Standard Price:	SGD 326.61-
  Days to Ship:	8 Day(s) or more

• 

  Coaxial Vertical Pseudo Lighting IFV Series

  IMAC

  Pseudo coaxial epi-illumination from the same optical axis as the camera axis, using a half mirror.
  [Features]
  · It enables inspection with specular reflection, making it effective for inspection of fine surface scratches and print/character inspection.
  · Available in 6 opening sizes from 13 mm to 100 mm.
  · BS (Beam Splitter) types help suppress ghost images.
  · Since the C01 type allows camera mounting in the horizontal direction, it can be selected according to the equipment space.
  · Light color can be selected from white / red / blue / green.
  [Applications]
  · Optimal for inspections of substrate patterns, sheet letters, gloss surface scratches, and characters.
  · Convenient for the pitch measurement of connector pins.

  CAD ：

  2D / 3D

  Standard Price:	SGD 678.92-
  Days to Ship:	13 Day(s) or more

• 

  LED Lamps- Lightings / Direct Ring

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 673.85-
  Days to Ship:	4 Day(s) or more

• 

  White LED lighting device (separated type)

  MIRUC OPTICAL

  A lighting device in which the LED lighting section and the power supply controller are separated. The LED light attached to the objective lens is compact (ø40), making it suitable for applications in narrow spaces.

  Standard Price:	SGD 511.31
  Days to Ship:	6 Day(s) or more

• 

  Chip LED Surface Illumination (Surface Emitting) IDHM Series

  IMAC

  Surface lighting with densely arranged chip LEDs.
  Backlight illumination achieves vivid silhouette images. Lineup in multiples of □30 mm. Can be selected to fit the image range.

  CAD ：

  2D / 3D

  Standard Price:	SGD 194.60-
  Days to Ship:	8 Day(s) or more

• 

  Shadowless Ring Illumination (Indirect Light) IFR Series

  IMAC

  Diffusion-type ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate for indirect lighting where direct LED light is not visible.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Character recognition, 2D code reading.
  · For mounting substrate parts inspection.
  · Character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,001.98-
  Days to Ship:	18 Day(s) or more

• 

  Direct Bar Lighting OPDB Series

  OPTEX FA

  It can widely be used as oblique lighting and backlight.
  [Features]
  ・ It can be selected from a lineup of 6 sizes depending on the illuminated area
  ・ Free mounting position with movable nuts
  ・ Since it has movable nuts, it is easy to adjust with the mounting jig.
  ・ It achieves high levels of illuminance, even when illuminating over long distances.
  ・ Adjusting the installation angle makes it illuminate from the optimum position
  ・ It can be installed freely, supporting various applications
  ・ It can be used as high-luminance surface lighting with a diffuser plate attached

  CAD ：

  2D

  Standard Price:	SGD 299.79
  Days to Ship:	20 Day(s) or more

• 

  Shadowless Low-Angle Ring Illumination (Indirect Light) IPR Series

  IMAC

  Diffusion-type low angle ring lighting that uniformly irradiates glossy and uneven workpieces.
  [Features]
  · Adopts an optical guide plate to keep direct LED light from being visible.
  · Uniformly irradiates glossy and uneven workpieces.
  · Light is emitted from the optical guide plate to reduce LED glare and limit halation.
  [Applications]
  · Ideal for edge chipping / crack inspection of spouts, etc., character recognition and 2D code reading.
  · Convenient for mounting substrate parts inspection and character inspection on gloss paper.

  CAD ：

  2D / 3D

  Standard Price:	SGD 2,777.43
  Days to Ship:	18 Day(s) or more

• 

  Highly Uniform Multi Ring Lighting VRMD Series

  SHIMATEC

  Universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · The original design of the diffusion plate delivers uniform wide-angle illumination.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 423.89-
  Days to Ship:	13 Day(s) or more

• 

  Direct Lighting Direct Irradiation Bar Type DL Series

  NISSIN ELECTRO

  A bar type lighting fixture in which LED elements are mounted along a line. Mountable in high densities from 4 mm element pitch. Directly illuminates targets thanks to its high illuminance.
  Also supports the optional mounting of diffusion plates and polarizing plates.
  
  [Applications] Inspection for various foreign matter, reading of various characters, product presence inspection, light source for line sensor cameras, etc.

  Standard Price:	SGD 1,576.01-
  Days to Ship:	12 Day(s) or more

• 

  Direct Lighting Direct Irradiation Square Type DL Series

  NISSIN ELECTRO

  Square direct lighting with a rectangular or square shaped illuminating surface. Available in abundant variations from small to large light emitting surfaces. Can be used for irradiation over a wide surface area. Optional diffusion plate and polarizing plate are also available.
  
  [Applications] Inspection for various foreign matter, reading of various characters, product presence inspection, etc.

  Standard Price:	SGD 3,400.43-
  Days to Ship:	12 Day(s) or more

• 

  Transparent Lighting Large Type Surface Emission Transmissive Type TY Series / TH Series

  NISSIN ELECTRO

  This low-cost large transmissive light is highly uniform. The combination of high-brightness power LED and special optical design provides high quality and uniform surface emission irradiation. Power-saving design ensures only a small amount of power is used, even with a large illuminating surface.
  
  [Applications] Various shape recognition, dimension measurement, foreign matter inspection, liquid level checking, pinhole inspection, sheet material inspection, etc.

  Standard Price:	SGD 1,201.04
  Days to Ship:	12 Day(s) or more

• 

  Mini Spot Lighting IHVA-SP Series

  IMAC

  Spot lighting that combines high-output power LED with special lens.
  It is small and lightweight, allowing installation in various environments such as inside equipment, at the tip of a robot arm, or for epi-illumination of a stereomicroscope.
  Lineup includes short-distance wide-range, wide-angle light distribution type (S) and long-distance high-output irradiation narrow light distribution type (L).
  

  Standard Price:	SGD 370.79
  Days to Ship:	13 Day(s) or more

• 

  Direct Ring Lighting FL-DR Series

  OMRON

  One of the highest luminosities in the industry* / Clear images with wide-field lighting.
  
  [Features]
  · Small yet high-luminosity ODR illumination
  · Broad range of workpiece distances supported

  CAD ：

  2D / 3D

  Standard Price:	SGD 960.54-
  Days to Ship:	4 Day(s) or more

• 

  LED Lamps- Lightings / Backlight

  MISUMI

  LED light has a longer lifespan than conventional halogen and fluorescent lamps. Maintenance frequency can be reduced.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	SGD 606.46-
  Days to Ship:	3 Day(s) or more

• 

  Horizontal Direct Ring Lighting OPDR-H Series

  OPTEX FA

  Direct ring lighting that can emphasize uneven areas by illuminating from the horizontal direction.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 739.92
  Days to Ship:	20 Day(s) or more

• 

  Coaxial Lighting OPCX Series

  OPTEX FA

  Coaxial lighting that captures specular reflection light from the workpiece.
  
  [Features]
  · Lighting that illuminates using screen light from the same axis as the lens.
  · Direct light is used to illuminate the workpiece, delivering a specular reflected image.
  · The red version has been updated and the brightness is now triple what it was previously.

  CAD ：

  2D

  Standard Price:	SGD 1,693.58
  Days to Ship:	20 Day(s) or more

• 

  Flat Direct Ring Lighting OPDR-F Series

  OPTEX FA

  Direct ring lighting capable of illuminating a wide area.

  CAD ：

  2D

  Standard Price:	SGD 728.74
  Days to Ship:	20 Day(s) or more

• 

  Low Angle Direct Ring Lighting OPDR-LA Series

  OPTEX FA

  Low angle ring lighting ideal for edge extraction and scratch inspection on glossy surfaces.
  
  [Features]
  · Lighting that makes out surface scratches and similar defects and features by illuminating the workpiece from a shallow angle (in respect to the workpiece).
  · Makes out any differences in the scatter rate by illuminating the target object from an angle and controlling the generation of any ghosting/unwanted reflections.

  CAD ：

  2D

  Standard Price:	SGD 871.98-
  Days to Ship:	20 Day(s) or more

• 

  Sensing Bar Lighting OPB-S Series

  OPTEX FA

  Bar lighting is three times brighter than conventional models and is equipped with a sensing function.
  
  [Features]
  · Provides luminance monitoring via the built-in sensor and long term stability via feedback.
  · Equipped with FALUX sensing.
  · The built-in photodiodes sense the luminance of the LED lighting.
  · Accurately measures the emitted luminance not just during continuous lighting conditions, but also under conditions where the light infrequently flashes on and off.
  · Furthermore, as well as the luminance of the emitted light, the internal temperature is also measured in the lighting itself, which can then be monitored on the power supply side.
  · Feedback control based off these monitored values is also possible using the OPPF series controller.
  · The absolute luminance makes adjusting for instrumentation errors for multiple light units easy.
  · The luminance at the time of shipping from the factory and the absolute luminance unique to the model are stored in the internal memory. The values can be referenced from the OPPF series.
  · With this, in addition to being able to monitor any changes in the luminosity values, adjusting for errors in the instrumentation for multiple lighting units is made easier by being able to compare the values with the absolute luminance value.
  · Inherits the performance of the popular OPB series.
  · Only 3.5 mm taller, even with the sensor built-in.
  · Corrections of fluctuations in brightness due to the FALUX and the excellent optical characteristics can be used as is.

  CAD ：

  2D / 3D

  Standard Price:	SGD 798.62-
  Days to Ship:	6 Day(s) or more

• 

  High Luminance B'C Line Lighting (2 Row Specification, Direct Light, Wide Angle/Narrow Angle) IDBA-LEH2 Series

  IMAC

  Direct-type bar lighting optimal for large workpieces and long distances.
  [Features]
  · 3 to 4 times brighter than IDBA-LE series. Light color can be selected from white / red / blue.
  · Narrow angle lighting type (L) that is optimal for long-distance lighting (WD 200 to 5,000 mm).
  · Wide angle lighting type (S) that is optimal for short-distance lighting (WD 80 to 200 mm).
  · Optimal for environments where lighting cannot be installed nearby and for applications for uniform irradiation within large trays.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,800 mm are supported.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces (cardboard).
  · Convenient for use as an auxiliary light source in inspection equipment for applications that require a high speed shutter, such as transporting workpieces.

  CAD ：

  2D

  Standard Price:	SGD 797.72-
  Days to Ship:	18 Day(s) or more

• 

  B'C Linear Light (Direct Light / Wide-Angle / Narrow-Angle) IDBA-LE Series

  IMAC

  Bar lighting optimal for large workpieces and long distances.
  [Features]
  · One-row specification equipped with high-output power LED.
  · 75 mm (12 V specification)/150 mm (24 V specification) increments up to 1,200 mm are supported.
  · Light color can be selected from white / red / blue / green / 850 infrared / 400 ultraviolet.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces, etc.
  · Ideal as an auxiliary light source for inspection devices, or as a visual inspection light for tabletop use.
  · Convenient for the external inspection of metal plates and acrylics, etc.

  CAD ：

  2D

  Standard Price:	SGD 444.69-
  Days to Ship:	8 Day(s) or more

• 

  B'C Linear Light (Direct Light / Wide-Angle) IDBA-SE Series

  IMAC

  25 mm width / 25 mm height compact near-distance wide range lighting bar.
  [Features]
  · Equipped with high-output power LEDs to illuminate brightly at short range.
  · Equivalent optical design to S type IDBA-LE units for a compact design with a width of 25 mm / height of 25 mm.
  · 50 mm (12 V specification)/100 mm (24 V specification) increments up to 800 mm are supported.
  · Light color can be selected from white / red / blue.
  [Applications]
  · Ideal for printing and visual inspections of large workpieces, etc.
  · Ideal as an auxiliary light source for inspection devices, or as a visual inspection light for tabletop use.

  CAD ：

  2D

  Standard Price:	SGD 385.57-
  Days to Ship:	18 Day(s) or more

• 

  Large Area Lighting RiaLux (Area Lighting: 400 Size or Less) IFPA Series

  IMAC

  Large and uniform surface illumination.
  Lineup in multiples of □100 mm. Ideal for inspecting appearance or foreign objects on large workpieces such as plastic bottles. The special structure naturally cools the air without air conditioning or a fan.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,753.41
  Days to Ship:	13 Day(s) or more

• 

  Square Surface Lighting (Indirect Light) IPQC Series

  IMAC

  Indirect lighting fixture with a low angle that illuminates from 4 directions.
  Uses high-power LEDs for at least 10 times as much light as conventional products. Ideal for engraving/edge extraction of square workpieces.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,163.02-
  Days to Ship:	8 Day(s) or more

• 

  UV Illumination UV-CAN Series

  IMAC

  405 nm, 375 nm, 365 nm ultraviolet lighting.
  Enables inspections clearer than those using visible light. Output 2 times that of the conventional model.

  CAD ：

  2D / 3D

  Standard Price:	SGD 1,295.02-
  Days to Ship:	18 Day(s) or more

• 

  Infrared Lighting Infrared Series

  IMAC

  Infrared light ideal for transmission type inspection of packages, liquids, printing, etc.
  [Features]
  · Adopts a wavelength peak of 850 nm, 950 nm, 1,200 nm or 1,450 nm.
  · Can be used for inspections that cannot be performed using visible light.
  · High transmittance infrared light is optimal for inspections where liquid is permeated or printed patterns are erased.
  [Applications]
  · Ideal for detecting foreign objects in liquid.
  · Convenient for visual inspection and character recognition after erasing patterns from the work surface.
  · Ideal for non-contact spectroscopic analysis and sugar concentration measurement, etc.

  CAD ：

  2D / 3D

  Standard Price:	SGD 561.44-
  Days to Ship:	18 Day(s) or more

• 

  Slim Lighting Ring VRDFR Series

  SHIMATEC

  Thin, space-saving ring lighting fixture.
  [Features]
  · Thin, space-saving design.
  · Contains both coaxial and oblique lighting components to enable wide-range uniform lighting.
  · Provides extremely uniform irradiation thanks to its wide light emission area and diffusibility.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Convenient for semiconductor electronic parts, circuit board inspection (exterior, alignment), text reading, tablet inspection, plastics, etc.

  CAD ：

  2D

  Standard Price:	SGD 1,060.21-
  Days to Ship:	13 Day(s) or more

• 

  High Luminance Multi Ring Lighting VRMD UP Series

  SHIMATEC

  High brightness type universal ring lighting which can easily provide the ideal image just by changing the lighting height.
  [Features]
  · Effects of the translucent diffuser plate enable brightness to be concentrated on a smaller area than the standard type.
  · Dust can be cleaned away easily at any time as the diffusion plate covers the entire light emission section.
  · The diffusion plate also comes with a protective cover for resistance to external impact, minimizing damage caused during accidents, etc.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of image processing, LCD alignment, and PCB alignment inspections.
  · Ideal for inspections of chip components, electronic components, and food cup inner surfaces.
  · Perfect for cleanrooms in semiconductor factories or food processing factories.

  CAD ：

  2D

  Standard Price:	SGD 423.89-
  Days to Ship:	13 Day(s) or more

• 

  Highly Uniform Dome Lighting VDSD Series

  SHIMATEC

  Dome lighting with excellent uniformity and brightness.
  [Features]
  · Uniform and very high brightness.
  · In addition to the illumination of the dome, it can irradiate diffused light from the side.
  · More uniform irradiation is possible through a combination of two types of lights.
  · The edge direction and the upward direction can be dimmed and lit independently.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for inspection of uneven products and foreign matter inspections of food packages, containers, etc.

  Standard Price:	SGD 1,002.36-
  Days to Ship:	13 Day(s) or more

• 

  Low Cost Type Surface Emission (for Transmission) Light VDFK Series

  SHIMATEC

  Light-emitting fitting that supports a maximum illuminating surface of 300 x 200 mm.
  [Features]
  · Square surface lighting uses an optical guide plate.
  · Up to 300 x 200 mm light emitting surfaces can be provided at a reasonable cost.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Ideal for all types of external inspections and dimensional measurements.
  · Ideal for permeation of large workpieces.
  · Can also be used for surface emission reflective lighting in addition to transmissive lighting.

  CAD ：

  2D

  Standard Price:	SGD 958.98-
  Days to Ship:	13 Day(s) or more

• 

  General Purpose Bar Illumination, VANSF Series

  SHIMATEC

  Universal bar lighting that combines well balanced brightness and uniformity.
  [Features]
  · Uniformity is improved further by mounting an optional diffusion plate.
  · Separate supported power supply controller VS-24 series and extension cable required.
  [Applications]
  · Useful for all types of image processing, LCD alignment, PCB alignment, and inspections of chip components and electronic components.

  CAD ：

  2D

  Standard Price:	SGD 221.41-
  Days to Ship:	13 Day(s) or more

• 

  Direct Ring Light MDRL Series

  MORITEX

  [Features]
  · High-illuminance LEDs are densely arranged so that illumination from all directions in 360° produces uniform shadowless illumination.
  · Standard type LED lighting fixture that can be used for a wide range of applications.
  · Choose a model that matches the manufacturer lens.

  Standard Price:	SGD 789.10
  Days to Ship:	63 Day(s) or more

• 

  Direct Lighting Direct Irradiation Type DR Series

  NISSIN ELECTRO

  LEDs are arranged on a ring, illuminating toward the center. Light from the element lights the target object directly.
  Each LED element emits light with a divergent angle to brightly and uniformly illuminate surfaces.
  
  [Applications] Inspection of various characters, printed surface contamination/scratch inspection, measurement inspection, etc.

  Standard Price:	SGD 3,085.45
  Days to Ship:	12 Day(s) or more

• 

  Direct Lighting Direct Irradiation Flat Ring DR-FA Series

  NISSIN ELECTRO

  LEDs are arranged in a ring pattern with no tilt angle. Light from the element lights the target object directly. Especially effective when specular reflective light is required. Each LED element emits light with a divergent angle, but if the installation distance is too close, the area near the center will become dark.
  
  [Applications] Inspection for various foreign matter, surface inspection, printed surface contamination/scratch inspection, etc.

  Standard Price:	SGD 6,607.58
  Days to Ship:	12 Day(s) or more

• 

  Direct Lighting Low-Angling DR-LA Series

  NISSIN ELECTRO

  By placing illumination at a low position and lighting from diagonally above, a vivid image with emphasized outlines and edges of workpieces can be obtained. LEDs are arranged in a ring shape that is closer to the vertical, illuminating toward the center.
  
  [Applications] Detection of various edges, inspection of engraved/scratched metal surfaces, printed surface contamination/scratch inspection, etc.

  Standard Price:	SGD 1,796.56-
  Days to Ship:	17 Day(s) or more

Loading...