Sensor Related Devices

• 

  Fiber Optic Sensor Accessory

  RIKO

  [Features]·It is made internationally and is offered at a low price. ·Accessories for the fiber sensor.

  CAD ：

  2D

  Standard Price:	SGD 9.27-
  Days to Ship:	10 Day(s) or more

• 

  CompoNet Compatible Sensor Communication Unit E3X-CRT

  OMRON

  Easy sensor setups CompoNet.
  
  [Features]
  · ON/OFF communication PLC send without programming to (CompoNet communication slave function).
  · Reads detected amount, threshold value, setting contents of each function, and operation such as writing and teaching can be performed. (message communication function).
  · For wire saving, connect the communication cable and slide the amplifier from the side.
  · Up to 16 sensor amplifiers can be connected· * specific to mode of operation.

  CAD ：

  2D

  Standard Price:	SGD 456.28
  Days to Ship:	57 Day(s) or more

• 

  Mechanical Controller

  MACHINE ENGINEERING

  With resin hand grip of 2 sheets, detection position and detection width can be easily adjusted.
  
  [Features]
  ・ Angle adjustment is a simple structure that only slides the dog that are aligned 2 pieces
  ・ Even if the angle is adjusted individually, the other rows will not rotate
  ・ The detection dog has a slit in units of 10° and can be cut with wire cutters, etc., according to the specifications
  ・ By tightening the clamper screw after adjusting the angle, the dog will be locked securely and will not slip
  ・ Compared to the shaft fixed type having conventional set screw, the angle can be adjusted severely
  
  

  CAD ：

  2D

  Standard Price:	SGD 39.47-
  Days to Ship:	4 Day(s) or more

• 

  Sensor Stay (Number of Included Sensors Selectable)

  MACHINE ENGINEERING

  If used in combination with MCR (mechanical controller), the timing of the rotary shaft can be easily detected.

  CAD ：

  2D

  Standard Price:	SGD 55.19-
  Days to Ship:	4 Day(s) or more

• 

  Signal Switch 2 (FW-SS)

  IMAO CORPORATION

  [Signal switch 2] The factory wireless device reliably conveys any trouble namely;Sound, light, vibration etc.
  Can connect to machines and various sensors, and can notify remote receivers, such as: buzzer, signal light etc. at remote locations.
  
  [Features]
  · Since the signal switch 2 is wireless, cable laying is unnecessary. To receive information about production site at the office, large cost reduction for laying special line is possible as compared to the wired mechanism.
  · Calling forklift in the factory for shifting, AGV can also use for checking the status.
  · With 8 contact points, more than one information at the same time can be received.
  · By connecting to a portable receiver, anon, etc., the status on the location can be known.
  · Transmitters, receivers, portable receivers can be combined in various ways according to the usage.
  · There is unique ID number of the transmitter hence even if multiple groups are made in the same building and used, there is no interference between radio waves from different groups.

  Standard Price:	SGD 562.49-
  Days to Ship:	6 Day(s) or more

• 

  Distribution Unit E3NW-DS

  OMRON

  Distribution unit can connect to all the sensor communication units.

  CAD ：

  3D

  Standard Price:	SGD 92.53-
  Days to Ship:	4 Day(s) or more

• 

  EtherCAT sensor communication unit E3X-ECT

  OMRON

  Communication unit that simplifies setting management of sensors
  
  [Features]
  · Easy sensor setup management EtherCAT sensor communication unit.
  · ON/OFF superior signal speed and detected amount PLC send without programming (PDO communication function).
  · Threshold value or each function setting can be performed (SDO co mmunication function).
  · For wire saving, connect the communication cable to power source and slide the amplifier from the side.
  · Up to 30 sensor amplifiers can be connected

  CAD ：

  2D

  Standard Price:	SGD 595.87
  Days to Ship:	52 Day(s) or more

• 

  Communication Unit for Digital Type Sensor (DeviceNet) [E3X-DRT21-S VER. 3]

  OMRON

  Easy sensor setups DeviceNet sensor communication unit.
  
  [Features]
  ON/OFF superior signal speed and detected amount PLC send without programming (DeviceNet communication slave function).
  · Reads threshold values and setting contents of each function, and also can perform operations such as writing and teaching (message communication function).
  · For wire saving, connect the communication cable and slide the amplifier from the side.
  · Up to 16 sensor amplifiers can be connected.

  Standard Price:	SGD 649.74
  Days to Ship:	7 Day(s) or more

• 

  Sensor stay

  MACHINE ENGINEERING

  [Features]
  · MCR Use of (mechanical controller) set, can easily detect the timing of the rotating shaft.

  CAD ：

  2D

  Standard Price:	SGD 27.93-
  Days to Ship:	6 Day(s) or more

• 

  Mechanical Equipment Monitoring System Factory Station

  IMAO CORPORATION

  To visualize the machine equipment situation.
  
  [Features]
  · Based on the collected information, the machine equipment operation status is displayed in real time.
  · Monthly report is prepared based on the information collected from daily operation graph, monthly operation graph and daily report.
  · Information can be gathered from machinery and equipment (running time, stopped time, setup time, abnormality), regardless of the maker and machine generation (old/new). (Machining, lathe, grinding machine, molding machine, press machine, special machine, various general-purpose machine)
  · E-mail notification in cases of any abnormal signal (alarms) from the machine.
  · The information collected can be used in business analysis and another system.
  · Using wireless system, large-scale wiring work [machine equipment monitoring system], from machines is unnecessary.

  Standard Price:	SGD 107.35-
  Days to Ship:	9 Day(s)

Loading...